M22-SWD-K22LEDC-R
116012 M22-SWD-K22LEDC-R
116012

Fonksiyon elemanı, RMQ-Titan çalıştırma elemanları M22-... ile kombinasyon için, 2 enversör kontak, Tabana sabitleme, kırmızı
Fonksiyon elemanı, Sabitleme: Tabana sabitleme, SmartWire-DT'ye bağlantı: evet

Basic function accessories	Function elements
Function	for combination with RMQ-Titan operating elements M22-...
Contacts	2 changeover contact
Fixing	Base fixing
Contact sequence
Contact travel diagram stroke in connection with front element
Configuration
Connection to SmartWire-DT
Standards	yes
Dimensions (W x H x D)	IEC/EN 61131-2 EN 50178
Weight	17 x 45 x 42 mm
Mounting position	14 g
Protection type (IEC/EN 60529, EN50178, VBG 4)	As required
Vibrations (IEC/EN 61131-2:2008) >Constant amplitude 3,5 mm	IP20
Vibrations (IEC/EN 61131-2:2008) >Constant acceleration 1 g	5 - 8.4 Hz
Mechanical shock resistance (IEC/EN 60068-2-27) semi-sinusoidal 15 g/11 ms	8.4 - 150 Hz
Drop to IEC/EN 60068-2-31 [Drop height]	9 Impacts
Free fall, packaged (IEC/EN 60068-2-32)	50 mm
Overvoltage category	0.3 m
Pollution degree	Not applicable
Electrostatic discharge (IEC/EN 61131-2:2008) >Air discharge (Level 3)	2
Electrostatic discharge (IEC/EN 61131-2:2008) >Contact discharge (Level 2)	8 kV
Electromagnetic fields (IEC/EN 61131-2:2008) >80 - 1000 MHz	4 kV
Electromagnetic fields (IEC/EN 61131-2:2008) >1.4 - 2 GHz	10 V/m
Electromagnetic fields (IEC/EN 61131-2:2008) >2 - 2.7 GHz	3 V/m
Radio interference suppression (SmartWire-DT)	1 V/m
Burst (IEC/EN 61131-2:2008, Level 3) >Supply cable	EN 55011 Class A
Burst (IEC/EN 61131-2:2008, Level 3) >SmartWire-DT cable	2 kV
Radiated RFI (IEC/EN 61131-2:2008, Level 3)	1 kV
Ambient temperature >Operating ambient temperature (IEC 60068-2)	10 V
Ambient temperature >Storage	-30 - +55 °C
Relative humidity >Condensation	- 40 - + 80 °C
Relative humidity >Relative humidity, non-condensing (IEC/EN 60068-2-30)	Take appropriate measures to prevent condensation
Station type	5 - 95 %
Address allocation	SmartWire-DT slave
Status indication	automatic
Connections	Green LED
Plug connectors	Plug, 8-pole
Baud rate setting	M22-SWD-I…LP
Switching state display	automatic
Diagnostics	Yes LED
Fixing	Yes
Rated operational current for specified heat dissipation [In]	Base fixing
Heat dissipation per pole, current-dependent [Pvid]	0 A
Equipment heat dissipation, current-dependent [Pvid]	0 W
Static heat dissipation, non-current-dependent [Pvs]	0 W
Heat dissipation capacity [Pdiss]	0.3 W
Operating ambient temperature min.	0 W
Operating ambient temperature max.	-30 °C
10.2 Strength of materials and parts >10.2.2 Corrosion resistance	+55 °C
10.2 Strength of materials and parts >10.2.3.1 Verification of thermal stability of enclosures	Meets the product standard´s requirements.
10.2 Strength of materials and parts >10.2.3.2 Verification of resistance of insulating materials to normal heat	Meets the product standard´s requirements.
10.2 Strength of materials and parts >10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects	Meets the product standard´s requirements.
10.2 Strength of materials and parts >10.2.4 Resistance to ultra-violet (UV) radiation	Meets the product standard´s requirements.
10.2 Strength of materials and parts >10.2.5 Lifting	Meets the product standard´s requirements.
10.2 Strength of materials and parts >10.2.6 Mechanical impact	Does not apply, since the entire switchgear needs to be evaluated.
10.2 Strength of materials and parts >10.2.7 Inscriptions	Does not apply, since the entire switchgear needs to be evaluated.
10.3 Degree of protection of ASSEMBLIES	Meets the product standard´s requirements.
10.4 Clearances and creepage distances	Does not apply, since the entire switchgear needs to be evaluated.
10.5 Protection against electric shock	Meets the product standard´s requirements.
10.6 Incorporation of switching devices and components	Does not apply, since the entire switchgear needs to be evaluated.
10.7 Internal electrical circuits and connections	Does not apply, since the entire switchgear needs to be evaluated.
10.8 Connections for external conductors	Is the panel builder´s responsibility.
10.9 Insulation properties >10.9.2 Power-frequency electric strength	Is the panel builder´s responsibility.
10.9 Insulation properties >10.9.3 Impulse withstand voltage	Is the panel builder´s responsibility.
10.9 Insulation properties >10.9.4 Testing of enclosures made of insulating material	Is the panel builder´s responsibility.
10.10 Temperature rise	Is the panel builder´s responsibility.
10.11 Short-circuit rating	The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
10.12 Electromagnetic compatibility	Is the panel builder´s responsibility. The specifications for the switchgear must be observed.
10.13 Mechanical function	Is the panel builder´s responsibility. The specifications for the switchgear must be observed.
Number of contacts as change-over contact	The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
Number of contacts as normally open contact	0
Number of contacts as normally closed contact	2
Number of fault-signal switches	2
Rated operation current Ie at AC-15, 230 V	0
Type of electric connection	0 A
Model	Flat plug-in connection
Mounting method	Top mounting
Lamp holder	Front fastening
UL File No.	LED not exchangeable
UL Category Control No.	E29184
CSA File No.	NKCR
CSA Class No.	2324643
North America Certification	3211-07
Specially designed for North America	UL listed, CSA certified

Mnelko olarak, endüstriyel otomasyon çözümlerinde güvenilir bir iş ortağı olarak, geniş ürün yelpazesi ile işletmenizin tüm ihtiyaçlarını karşılamaya yönelik kaliteli ve yenilikçi ürünler sunmaktayız. Ürün portföyümüz, modern endüstriyel süreçleri desteklemek amacıyla yüksek performans, dayanıklılık ve verimlilik ilkeleri doğrultusunda tasarlanmış çözümlerden oluşur.
Tüm ürünlerimiz, zorlu çalışma koşullarında dahi maksimum güvenilirlik sunar ve işletmenizin operasyonlarını sorunsuz şekilde sürdürmesine yardımcı olur. Endüstriyel otomasyon, enerji yönetimi, kablolama çözümleri ve daha birçok alanda sunduğumuz ürünler, farklı sektörlerdeki ihtiyaçlara esneklikle uyum sağlar.
Ayrıca, ürünlerimiz sadece kaliteli malzemelerle üretilmiş olup, uluslararası standartlara uygunluk göstermektedir. Müşterilerimize sunduğumuz çözümlerle, operasyonel verimliliklerini artırmalarına ve maliyetlerini optimize etmelerine olanak tanıyoruz. Teknolojik gelişmeleri yakından takip eden firmamız, sürekli olarak yenilikçi ürünler sunarak, müşterilerimizin rekabet avantajı elde etmesine destek vermektedir.
Her bir ürün sayfamızda, teknik detaylar, kullanım alanları ve ürün özelliklerine dair kapsamlı bilgilere ulaşabilirsiniz. Endüstriyel süreçlerinizi güçlendirmek için ihtiyacınız olan tüm ürünleri sitemizden keşfedebilir, sorunsuz bir satın alma deneyimi yaşayabilirsiniz.