M22-CLEDC230-R
216579 M22-CLEDC230-R
216579

LED elemanı, kırmızı, taban sabitlemeli, kafes kelepçeli
LED elemanı, Sabitleme: Tabana sabitleme, Bağlantı tekniği: Kafes Kelepçesi, Açıklama: Kafes Kelepçesi, Wago Kontakttechnik GmbH/Minden, Almanya'nın tescilli ticari markasıdır, Nominal çalışma gerilimi: Ue= 85 - 264 V AC, 50/60 Hz V, Nominal çalışma akımı: Ie= 5 - 15 mA, Güç tüketimi: Pmax.= 0,33 W, 230 V'de, Koruma Derecesi: IP20, SmartWire-DT'ye bağlantı: hayır, Standartlar: IEC 60947-5-1

Basic function accessories	LED elements
Description	Cage Clamp is a registered trademark of Wago Kontakttechnik GmbH/Minden, Germany
Connection technique	Cage Clamp
Fixing	Base fixing
Rated operational voltage [Ue]	85 - 264 V AC, 50/60 Hz V
Power consumption [Pmax.]	0.33 W
Lifespan to EN 60064 at ta = +25 °C [tmean (AC)]	100000 h
Degree of Protection	IP20
Connection to SmartWire-DT	At 230 V
Approval
Connection technique	no
Notes
Standards	Cage Clamp
Operating torque (screw terminals)	For indicator lights, illuminated pushbutton actuators, and illuminated selector switch actuators, the following applies: M22...-R only in combination with M22-LED...-R M22...-G only in combination with M22-LED...-G M22...-W only in combination with M22-LED...-W M22...-Y only in combination with M22-LED...-W M22…-B in combination with M22-LED…-W or M22-LED…-B
Degree of Protection	IEC 60947-5-1
Climatic proofing	≦ 0.8 Nm
Ambient temperature >Open	IP20
Ambient temperature >Storage	Damp heat, constant, to IEC 60068-2-78 Damp heat, cyclic, to IEC 60068-2-30
Mounting position	-25 - +70 °C
Mechanical shock resistance according to IEC 60068-2-27 Shock duration 11 ms, half-sinusoidal	- 40 - + 80 °C
Mechanical shock resistance	As required
Terminal capacities >Solid	> 30 g
Terminal capacities >Stranded	30 Shock duration 11 ms Sinusoidal according to IEC 60068-2-27 g
Rated impulse withstand voltage [Uimp]	0.75 - 2.5 mm2
Rated insulation voltage [Ui ]	0.5 - 2.5 mm2
Overvoltage category/pollution degree	6000 V AC
Rated operational current for specified heat dissipation [In]	500 V
Heat dissipation per pole, current-dependent [Pvid]	III/3
Equipment heat dissipation, current-dependent [Pvid]	Indoor and protected outdoor installation
Static heat dissipation, non-current-dependent [Pvs]	0 A
Heat dissipation capacity [Pdiss]	0 W
Operating ambient temperature min.	0 W
Operating ambient temperature max.	1 W
10.2 Strength of materials and parts >10.2.2 Corrosion resistance	0 W
10.2 Strength of materials and parts >10.2.3.1 Verification of thermal stability of enclosures	-25 °C
10.2 Strength of materials and parts >10.2.3.2 Verification of resistance of insulating materials to normal heat	+70 °C
10.2 Strength of materials and parts >10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects	Meets the product standard´s requirements.
10.2 Strength of materials and parts >10.2.4 Resistance to ultra-violet (UV) radiation	Meets the product standard´s requirements.
10.2 Strength of materials and parts >10.2.5 Lifting	Meets the product standard´s requirements.
10.2 Strength of materials and parts >10.2.6 Mechanical impact	Meets the product standard´s requirements.
10.2 Strength of materials and parts >10.2.7 Inscriptions	Meets the product standard´s requirements.
10.3 Degree of protection of ASSEMBLIES	Does not apply, since the entire switchgear needs to be evaluated.
10.4 Clearances and creepage distances	Does not apply, since the entire switchgear needs to be evaluated.
10.5 Protection against electric shock	Meets the product standard´s requirements.
10.6 Incorporation of switching devices and components	Does not apply, since the entire switchgear needs to be evaluated.
10.7 Internal electrical circuits and connections	Meets the product standard´s requirements.
10.8 Connections for external conductors	Does not apply, since the entire switchgear needs to be evaluated.
10.9 Insulation properties >10.9.2 Power-frequency electric strength	Does not apply, since the entire switchgear needs to be evaluated.
10.9 Insulation properties >10.9.3 Impulse withstand voltage	Is the panel builder´s responsibility.
10.9 Insulation properties >10.9.4 Testing of enclosures made of insulating material	Is the panel builder´s responsibility.
10.10 Temperature rise	Is the panel builder´s responsibility.
10.11 Short-circuit rating	Is the panel builder´s responsibility.
10.12 Electromagnetic compatibility	Is the panel builder´s responsibility.
10.13 Mechanical function	The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
Transformer integrated	Is the panel builder´s responsibility. The specifications for the switchgear must be observed.
With integrated voltage decreasing resistor	Is the panel builder´s responsibility. The specifications for the switchgear must be observed.
With light source	The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
With integrated diode	No
Lamp holder	No
Rated voltage Ue at AC 50 Hz	Yes
Rated voltage Ue at AC 60 Hz	Yes
Rated voltage Ue at DC	None
Voltage type for actuating	85 - 264 V
Lamp type	85 - 264 V
Connection type auxiliary circuit	0 - 0 V
Colour lamp	AC
Type of fastening	LED
Product Standards	Spring clamp connection
UL File No.	Red
UL Category Control No.	Floor fastening
CSA File No.	IEC/EN 60947-5; UL 508; CSA-C22.2 No. 14-05; CSA-C22.2 No. 94-91; CE marking
CSA Class No.	E29184
North America Certification	NKCR
Degree of Protection	012528

Mnelko olarak, endüstriyel otomasyon çözümlerinde güvenilir bir iş ortağı olarak, geniş ürün yelpazesi ile işletmenizin tüm ihtiyaçlarını karşılamaya yönelik kaliteli ve yenilikçi ürünler sunmaktayız. Ürün portföyümüz, modern endüstriyel süreçleri desteklemek amacıyla yüksek performans, dayanıklılık ve verimlilik ilkeleri doğrultusunda tasarlanmış çözümlerden oluşur.
Tüm ürünlerimiz, zorlu çalışma koşullarında dahi maksimum güvenilirlik sunar ve işletmenizin operasyonlarını sorunsuz şekilde sürdürmesine yardımcı olur. Endüstriyel otomasyon, enerji yönetimi, kablolama çözümleri ve daha birçok alanda sunduğumuz ürünler, farklı sektörlerdeki ihtiyaçlara esneklikle uyum sağlar.
Ayrıca, ürünlerimiz sadece kaliteli malzemelerle üretilmiş olup, uluslararası standartlara uygunluk göstermektedir. Müşterilerimize sunduğumuz çözümlerle, operasyonel verimliliklerini artırmalarına ve maliyetlerini optimize etmelerine olanak tanıyoruz. Teknolojik gelişmeleri yakından takip eden firmamız, sürekli olarak yenilikçi ürünler sunarak, müşterilerimizin rekabet avantajı elde etmesine destek vermektedir.
Her bir ürün sayfamızda, teknik detaylar, kullanım alanları ve ürün özelliklerine dair kapsamlı bilgilere ulaşabilirsiniz. Endüstriyel süreçlerinizi güçlendirmek için ihtiyacınız olan tüm ürünleri sitemizden keşfedebilir, sorunsuz bir satın alma deneyimi yaşayabilirsiniz.