AS-Arayüz modülü, 2I, 1Q, vidalı bağlantı ASI bağımlı 2 giriş, 1 çıkış
AS-Arayüz modülü, 2I, 1Q, vidalı bağlantı
ASI bağımlı 2 giriş, 1 çıkış
| Product range | Accessories |
| Accessories | AS-Interface |
| Basic function accessories | AS-Interface connection |
| Fixing | Front fixing for RMQ-Titan |
| Front ring | AS-Interface slave Adapter element for RMQ-Titan AS-Interface information: 2 input bits, 1 output bit Module enclosure for snap fitting on the contact and LED elements: – Inputs for 2 contact elements: M22-K01 (N/C), M22-K10 (N/O) – Output for 1 LED element: M22-LED-... Including AS-Interface connector as insulation piercing terminal |
| Connection to SmartWire-DT | Bezel: titanium |
| Standards | no |
| Radio interference suppression | IEC/EN 60947, DIN EN 50 295 |
| Degree of Protection | EN 55011, EN 55022 |
| Climatic proofing | IP20 |
| Ambient temperature >Open |
Damp heat, constant, to IEC 60068-2-78 Damp heat, cyclic, to IEC 60068-2-30 |
| Mechanical shock resistance | -25 - +55 °C |
| Fixing | > 30 Shock duration 11 ms g |
| Mounting position | Front fixing for RMQ-Titan |
| Rated voltage to AS-Interface Specification | As required |
| Connection of the AS interface line | 26.5 - 31.6 V DC |
| Power supply | Yellow plug-in terminal as insulation piercing terminal |
| Addressing | Completely from the AS-Interface cable |
| Max. total current | Via connection to AS-Interface cable |
| AS-Interface | ≦ 40 mA |
| Rated operational current when idle (no I, O set) | Protected against polarity reversal |
| Status LEDs | 30 mA |
| Inputs, protected against short-circuit | AS-Interface power line: green LED on element back AS-Interface ERROR, failure of AS-Interface master: red LED on element back |
| Length of connecting cables | 2 (normally 22 V/5 mA) Number |
| Outputs, protected against short-circuit | 200 cm |
| Voltage range | 1 (normally 19 V/8 mA) Number |
| Length of connecting cables | 24 V DC (+10/-15%) V DC |
| Profile | 200 cm |
| Specification | S-3.A.E |
| Addresses | 2.1 |
| Rated operational current for specified heat dissipation [In] | 62 Number |
| Heat dissipation per pole, current-dependent [Pvid] | 0 A |
| Equipment heat dissipation, current-dependent [Pvid] | 0 W |
| Static heat dissipation, non-current-dependent [Pvs] | 0 W |
| Heat dissipation capacity [Pdiss] | 1.3 W |
| Operating ambient temperature min. | 0 W |
| Operating ambient temperature max. | -25 °C |
| 10.2 Strength of materials and parts >10.2.2 Corrosion resistance |
+55 °C |
| 10.2 Strength of materials and parts >10.2.3.1 Verification of thermal stability of enclosures |
Meets the product standard´s requirements. |
| 10.2 Strength of materials and parts >10.2.3.2 Verification of resistance of insulating materials to normal heat |
Meets the product standard´s requirements. |
| 10.2 Strength of materials and parts >10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects |
Meets the product standard´s requirements. |
| 10.2 Strength of materials and parts >10.2.4 Resistance to ultra-violet (UV) radiation |
Meets the product standard´s requirements. |
| 10.2 Strength of materials and parts >10.2.5 Lifting |
Meets the product standard´s requirements. |
| 10.2 Strength of materials and parts >10.2.6 Mechanical impact |
Does not apply, since the entire switchgear needs to be evaluated. |
| 10.2 Strength of materials and parts >10.2.7 Inscriptions |
Does not apply, since the entire switchgear needs to be evaluated. |
| 10.3 Degree of protection of ASSEMBLIES | Meets the product standard´s requirements. |
| 10.4 Clearances and creepage distances | Does not apply, since the entire switchgear needs to be evaluated. |
| 10.5 Protection against electric shock | Meets the product standard´s requirements. |
| 10.6 Incorporation of switching devices and components | Does not apply, since the entire switchgear needs to be evaluated. |
| 10.7 Internal electrical circuits and connections | Does not apply, since the entire switchgear needs to be evaluated. |
| 10.8 Connections for external conductors | Is the panel builder´s responsibility. |
| 10.9 Insulation properties >10.9.2 Power-frequency electric strength |
Is the panel builder´s responsibility. |
| 10.9 Insulation properties >10.9.3 Impulse withstand voltage |
Is the panel builder´s responsibility. |
| 10.9 Insulation properties >10.9.4 Testing of enclosures made of insulating material |
Is the panel builder´s responsibility. |
| 10.10 Temperature rise | Is the panel builder´s responsibility. |
| 10.11 Short-circuit rating | The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices. |
| 10.12 Electromagnetic compatibility | Is the panel builder´s responsibility. The specifications for the switchgear must be observed. |
| 10.13 Mechanical function | Is the panel builder´s responsibility. The specifications for the switchgear must be observed. |
| Built-in diameter | The device meets the requirements, provided the information in the instruction leaflet (IL) is observed. |
| Number of appliances to build in | 0 mm |
| Product Standards | 0 |
| UL File No. | IEC/EN 60947-5; UL 508; CSA-C22.2 No. 14-05; CSA-C22.2 No. 94-91; CE marking |
| UL Category Control No. | E29184 |
| CSA File No. | NKCR |
| CSA Class No. | 012528 |
| North America Certification | 3211-03 |
Mnelko olarak, endüstriyel otomasyon çözümlerinde güvenilir bir iş ortağı olarak, geniş ürün yelpazesi ile işletmenizin tüm ihtiyaçlarını karşılamaya yönelik kaliteli ve yenilikçi ürünler sunmaktayız. Ürün portföyümüz, modern endüstriyel süreçleri desteklemek amacıyla yüksek performans, dayanıklılık ve verimlilik ilkeleri doğrultusunda tasarlanmış çözümlerden oluşur.
Tüm ürünlerimiz, zorlu çalışma koşullarında dahi maksimum güvenilirlik sunar ve işletmenizin operasyonlarını sorunsuz şekilde sürdürmesine yardımcı olur. Endüstriyel otomasyon, enerji yönetimi, kablolama çözümleri ve daha birçok alanda sunduğumuz ürünler, farklı sektörlerdeki ihtiyaçlara esneklikle uyum sağlar.
Ayrıca, ürünlerimiz sadece kaliteli malzemelerle üretilmiş olup, uluslararası standartlara uygunluk göstermektedir. Müşterilerimize sunduğumuz çözümlerle, operasyonel verimliliklerini artırmalarına ve maliyetlerini optimize etmelerine olanak tanıyoruz. Teknolojik gelişmeleri yakından takip eden firmamız, sürekli olarak yenilikçi ürünler sunarak, müşterilerimizin rekabet avantajı elde etmesine destek vermektedir.
Her bir ürün sayfamızda, teknik detaylar, kullanım alanları ve ürün özelliklerine dair kapsamlı bilgilere ulaşabilirsiniz. Endüstriyel süreçlerinizi güçlendirmek için ihtiyacınız olan tüm ürünleri sitemizden keşfedebilir, sorunsuz bir satın alma deneyimi yaşayabilirsiniz.
Tüm hakları saklıdır. Mnelko Endüstriyel San. ve Tic.Ltd.Şti. 2024
