Minyatür devre kesici (MCB), 32 A, 3p, karakteristik: Z Minyatür devre kesici (MCB), FAZ, 3 kutuplu, açma karakteristiği: Z, nominal akım In: 32 A, Endüstriyel ve gelişmiş ticari uygulamalar için şalt cihazı
Minyatür devre kesici (MCB), 32 A, 3p, karakteristik: Z
Minyatür devre kesici (MCB), FAZ, 3 kutuplu, açma karakteristiği: Z, nominal akım In: 32 A, Endüstriyel ve gelişmiş ticari uygulamalar için şalt cihazı
| Basic function | Miniature circuit-breakers |
| Number of poles | 3 pole |
| Tripping characteristic | Z |
| Application | Switchgear for industrial and advanced commercial applications |
| Rated current [In] | 32 A |
| Rated switching capacity acc. to IEC/EN 60947-2 [Icu] | 10 kA |
| Product range | FAZ |
| Standards | |
| Rated operational voltage [Ue] [Ue] | IEC/EN 60947-2 IEC/EN 60898 |
| Rated operational voltage [Ue] | 240/415 V AC |
| Rated switching capacity acc. to IEC/EN 60947-2 [Icu] | 60 (per pole) V DC |
| Operational switching capacity | 10 kA |
| Characteristic | 7.5 kA |
| Max. back-up fuse | B, C, D, K, S, Z |
| Selectivity Class | 125 A gL/gG |
| lifespan >Lifespan [Operations] |
3 |
| Direction of incoming supply | > 10000 |
| Standard front dimension | as required |
| Enclosure height | |
| Mounting width per pole | 45 mm |
| Mounting | 80 mm |
| Degree of Protection | 17.5 mm |
| Terminals top and bottom | IEC/EN 60715 top-hat rail |
| Terminal protection | IP20, IP40 (when fitted) |
| Terminal capacities | Twin-purpose terminals |
| Terminal capacities | Finger and back-of-hand proof to BGV A2 |
| Thickness of busbar material | 1 x 25 mm2 |
| Mounting position | 2 x 10 mm2 |
| Rated operational current for specified heat dissipation [In] | 0.8 … 2 mm |
| Heat dissipation per pole, current-dependent [Pvid] | As required |
| Equipment heat dissipation, current-dependent [Pvid] | |
| Static heat dissipation, non-current-dependent [Pvs] | 32 A |
| Heat dissipation capacity [Pdiss] | 0 W |
| Operating ambient temperature min. | 10.2 W |
| Operating ambient temperature max. | 0 W |
| 10.2 Strength of materials and parts >10.2.2 Corrosion resistance |
0 W |
| 10.2 Strength of materials and parts >10.2.3.1 Verification of thermal stability of enclosures |
-40 °C |
| 10.2 Strength of materials and parts >10.2.3.2 Verification of resistance of insulating materials to normal heat |
+75 °C |
| 10.2 Strength of materials and parts >10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects |
linear, per +1 °C, results in a 0.5% reduction of current carrying capacity |
| 10.2 Strength of materials and parts >10.2.4 Resistance to ultra-violet (UV) radiation |
|
| 10.2 Strength of materials and parts >10.2.5 Lifting |
Meets the product standard´s requirements. |
| 10.2 Strength of materials and parts >10.2.6 Mechanical impact |
Meets the product standard´s requirements. |
| 10.2 Strength of materials and parts >10.2.7 Inscriptions |
Meets the product standard´s requirements. |
| 10.3 Degree of protection of ASSEMBLIES | Meets the product standard´s requirements. |
| 10.4 Clearances and creepage distances | Meets the product standard´s requirements. |
| 10.5 Protection against electric shock | Does not apply, since the entire switchgear needs to be evaluated. |
| 10.6 Incorporation of switching devices and components | Does not apply, since the entire switchgear needs to be evaluated. |
| 10.7 Internal electrical circuits and connections | Meets the product standard´s requirements. |
| 10.8 Connections for external conductors | Does not apply, since the entire switchgear needs to be evaluated. |
| 10.9 Insulation properties >10.9.2 Power-frequency electric strength |
Meets the product standard´s requirements. |
| 10.9 Insulation properties >10.9.3 Impulse withstand voltage |
Does not apply, since the entire switchgear needs to be evaluated. |
| 10.9 Insulation properties >10.9.4 Testing of enclosures made of insulating material |
Does not apply, since the entire switchgear needs to be evaluated. |
| 10.10 Temperature rise | Is the panel builder´s responsibility. |
| 10.11 Short-circuit rating | Is the panel builder´s responsibility. |
| 10.12 Electromagnetic compatibility | Is the panel builder´s responsibility. |
| 10.13 Mechanical function | Is the panel builder´s responsibility. |
| Release characteristic | Is the panel builder´s responsibility. |
| Number of poles (total) | The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices. |
| Number of protected poles | Is the panel builder´s responsibility. The specifications for the switchgear must be observed. |
| Rated current | Is the panel builder´s responsibility. The specifications for the switchgear must be observed. |
| Rated voltage | The device meets the requirements, provided the information in the instruction leaflet (IL) is observed. |
| Rated insulation voltage Ui | |
| Rated impulse withstand voltage Uimp | |
| Rated short-circuit breaking capacity Icn EN 60898 at 230 V | Z |
| Rated short-circuit breaking capacity Icn EN 60898 at 400 V | 3 |
| Rated short-circuit breaking capacity Icu IEC 60947-2 at 230 V | 3 |
| Rated short-circuit breaking capacity Icu IEC 60947-2 at 400 V | 32 A |
| Voltage type | 400 V |
| Frequency | 440 V |
| Current limiting class | 4 kV |
| Suitable for flush-mounted installation | 0 kA |
| Concurrently switching N-neutral | 0 kA |
| Over voltage category | 10 kA |
| Pollution degree | 10 kA |
| Additional equipment possible | AC |
| Width in number of modular spacings | 50 - 60 Hz |
| Built-in depth | 3 |
| Degree of protection (IP) | No |
| Ambient temperature during operating | No |
| Connectable conductor cross section multi-wired | 3 |
| Connectable conductor cross section solid-core | 2 |
| Product Standards | Yes |
| UL File No. | 3 |
| UL Category Control No. | 70.5 mm |
| CSA File No. | IP20 |
| CSA Class No. | -25 - 75 °C |
| North America Certification | 1 - 25 mm² |
| Conditions of Acceptability | 1 - 25 mm² |
| Suitable for | IEC/EN 60947-2; IEC/EN 60898; UL 1077; CSA-C22.2 No. 235; CE marking |
| Current Limiting Circuit-Breaker | E177451 |
| Max. Voltage Rating | QVNU2, QVNU8 |
| Degree of Protection | 204453 |
| Characteristic curve | 3215-30 |
| Characteristic curve | UL recognized, CSA certified |
| Characteristic curve | Supplementary Protector only |
| Characteristic curve | Branch Circuits; not as BCPD |
Mnelko olarak, endüstriyel otomasyon çözümlerinde güvenilir bir iş ortağı olarak, geniş ürün yelpazesi ile işletmenizin tüm ihtiyaçlarını karşılamaya yönelik kaliteli ve yenilikçi ürünler sunmaktayız. Ürün portföyümüz, modern endüstriyel süreçleri desteklemek amacıyla yüksek performans, dayanıklılık ve verimlilik ilkeleri doğrultusunda tasarlanmış çözümlerden oluşur.
Tüm ürünlerimiz, zorlu çalışma koşullarında dahi maksimum güvenilirlik sunar ve işletmenizin operasyonlarını sorunsuz şekilde sürdürmesine yardımcı olur. Endüstriyel otomasyon, enerji yönetimi, kablolama çözümleri ve daha birçok alanda sunduğumuz ürünler, farklı sektörlerdeki ihtiyaçlara esneklikle uyum sağlar.
Ayrıca, ürünlerimiz sadece kaliteli malzemelerle üretilmiş olup, uluslararası standartlara uygunluk göstermektedir. Müşterilerimize sunduğumuz çözümlerle, operasyonel verimliliklerini artırmalarına ve maliyetlerini optimize etmelerine olanak tanıyoruz. Teknolojik gelişmeleri yakından takip eden firmamız, sürekli olarak yenilikçi ürünler sunarak, müşterilerimizin rekabet avantajı elde etmesine destek vermektedir.
Her bir ürün sayfamızda, teknik detaylar, kullanım alanları ve ürün özelliklerine dair kapsamlı bilgilere ulaşabilirsiniz. Endüstriyel süreçlerinizi güçlendirmek için ihtiyacınız olan tüm ürünleri sitemizden keşfedebilir, sorunsuz bir satın alma deneyimi yaşayabilirsiniz.
Tüm hakları saklıdır. Mnelko Endüstriyel San. ve Tic.Ltd.Şti. 2024
