FAZ-C32/4-NA
190821 FAZ-C32/4-NA
190821

Minyatür devre kesici (MCB), C32, 4 kutuplu, NA
Yüksek dereceli minyatür devre kesici, UL 1077 veya CSA C22.2 No. 235 için de izin verilen uygulamalar için UL 489, CSA C22.2 No. 5 ve IEC 60947-2 standartlarına uygundur, yardımcı kontak modülü ve sonradan takmak için voltaj serbest bırakma, kırmızı/yeşil kontak konumu göstergesi, DIN rayına kolay montaj

Basic function	Miniature circuit-breakers
Number of poles	4 pole
Tripping characteristic	C
Application	Switchgear for export to North America (UL-listed)
Rated current [In]	32 A
Rated switching capacity acc. to IEC/EN 60947-2 [Icu]	15 kA
Product range	FAZ-NA
Standards	UL 489, CSA C22.2 No. 5 IEC 60947-2
Rated operational voltage [Ue] [Ue]	277/480 Y V AC
Rated operational voltage [Ue]	60 V DC
Rated voltage according to IEC/EN 60947-2 [Un]	440 V AC
Rated voltage according to UL [Un]	480Y/277 V AC
Rated insulation voltage [Ui ]	440 V
Rated switching capacity acc. to IEC/EN 60947-2 [Icu]	15 kA
Breaking capacity according to UL	10 (UL489) kA
Operational switching capacity	7.5 kA
Characteristic	B, C, D
Max. back-up fuse	125 A gL/gG
Selectivity Class	3
lifespan >Electrical [Operations]	≧ 1500
lifespan >electrical UL [Operations]	≧ 6000
lifespan >Mechanical [Operations]	≧ 10000
lifespan >Lifespan [Operations]	> 10000
Direction of incoming supply	as required
Auxiliary switch for subsequent installation	Z-IHK-NA 113895
Tripping signal contact for subsequent installation	Z-NHK 248434
Switching interlock	Z-IS/SPE-1TE 274418
Shunt trip release	FAZ-XAA-NA110-415V AC 102036 FAZ-XAA-NA12-110V AC 102037
Standard front dimension	45 mm
Enclosure height	105 mm
Mounting width per pole	17.7 mm
Mounting	IEC/EN 60715 top-hat rail
Degree of Protection	IP20, IP40 (when fitted)
Terminals top and bottom	lift terminal / ring-tongue
Terminal protection	Finger and back-of-hand proof to BGV A2
Terminal capacities	1 x 25 mm2
Terminal capacities	2 x 10 mm2
Tightening torque of fixing screws	max. 2.4 UL: #18-12 AWG: 2.4 Nm (21 lb-in) #10-8 AWG: 2.8 Nm (25 lb-in) #6 AWG: 4 Nm (36 lb-in) N/m
Mounting position	As required
Contact position indicator	red / green
Internal resistance (at room temperature, single-pole, 50 Hz) >single pole [Ri]	3 mΩ
Operating ambient temperature min. (UL)	-5 °C
Operating ambient temperature max. (UL)	+40 °C
Rated operational current for specified heat dissipation [In]	32 A
Heat dissipation per pole, current-dependent [Pvid]	0 W
Static heat dissipation, non-current-dependent [Pvs]	0 W
Heat dissipation capacity [Pdiss]	0 W
Operating ambient temperature min.	-40 °C
Operating ambient temperature max.	+75 °C
10.2 Strength of materials and parts >10.2.2 Corrosion resistance	linear, per +1 °C, results in a 0.5% reduction of current carrying capacity
10.2 Strength of materials and parts >10.2.3.1 Verification of thermal stability of enclosures	Meets the product standard´s requirements.
10.2 Strength of materials and parts >10.2.3.2 Verification of resistance of insulating materials to normal heat	Meets the product standard´s requirements.
10.2 Strength of materials and parts >10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects	Meets the product standard´s requirements.
10.2 Strength of materials and parts >10.2.4 Resistance to ultra-violet (UV) radiation	Meets the product standard´s requirements.
10.2 Strength of materials and parts >10.2.5 Lifting	Meets the product standard´s requirements.
10.2 Strength of materials and parts >10.2.6 Mechanical impact	Does not apply, since the entire switchgear needs to be evaluated.
10.2 Strength of materials and parts >10.2.7 Inscriptions	Does not apply, since the entire switchgear needs to be evaluated.
10.3 Degree of protection of ASSEMBLIES	Meets the product standard´s requirements.
10.4 Clearances and creepage distances	Does not apply, since the entire switchgear needs to be evaluated.
10.5 Protection against electric shock	Meets the product standard´s requirements.
10.6 Incorporation of switching devices and components	Does not apply, since the entire switchgear needs to be evaluated.
10.7 Internal electrical circuits and connections	Does not apply, since the entire switchgear needs to be evaluated.
10.8 Connections for external conductors	Is the panel builder´s responsibility.
10.9 Insulation properties >10.9.2 Power-frequency electric strength	Is the panel builder´s responsibility.
10.9 Insulation properties >10.9.3 Impulse withstand voltage	Is the panel builder´s responsibility.
10.9 Insulation properties >10.9.4 Testing of enclosures made of insulating material	Is the panel builder´s responsibility.
10.11 Short-circuit rating	Is the panel builder´s responsibility.
10.12 Electromagnetic compatibility	Is the panel builder´s responsibility. The specifications for the switchgear must be observed.
10.13 Mechanical function	Is the panel builder´s responsibility. The specifications for the switchgear must be observed.
Release characteristic	The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
Number of poles (total)	C
Number of protected poles	4
Rated current	4
Rated voltage	32 A
Rated insulation voltage Ui	240 V
Rated impulse withstand voltage Uimp	440 V
Rated short-circuit breaking capacity Icn EN 60898 at 230 V	4 kV
Rated short-circuit breaking capacity Icn EN 60898 at 400 V	10 kA
Rated short-circuit breaking capacity Icu IEC 60947-2 at 230 V	15 kA
Rated short-circuit breaking capacity Icu IEC 60947-2 at 400 V	10 kA
Voltage type	14 kA
Frequency	AC
Current limiting class	50 - 50 Hz
Suitable for flush-mounted installation	3
Concurrently switching N-neutral	Yes
Over voltage category	No
Pollution degree	3
Additional equipment possible	2
Width in number of modular spacings	Yes
Built-in depth	70.8
Degree of protection (IP)	60 mm
Ambient temperature during operating	IP20
Connectable conductor cross section multi-wired	-25 - 75 °C
Connectable conductor cross section solid-core	1 - 25 mm²
Product Standards	1 - 25 mm²
UL File No.	IEC/EN 60947-2; UL 489; CSA-C22.2 No. 5-09; CE marking
UL Category Control No.	E235139
CSA File No.	DIVQ
CSA Class No.	204453
North America Certification	1432-01
Specially designed for North America	UL listed, CSA certified
Suitable for	Yes, suitable as BCPD
Current Limiting Circuit-Breaker	Feeder circuits, branch circuits
Max. Voltage Rating	Yes
Degree of Protection	≤ 32 A
Characteristic curve	IEC: IP20, UL/CSA Type: -
Characteristic curve

Mnelko olarak, endüstriyel otomasyon çözümlerinde güvenilir bir iş ortağı olarak, geniş ürün yelpazesi ile işletmenizin tüm ihtiyaçlarını karşılamaya yönelik kaliteli ve yenilikçi ürünler sunmaktayız. Ürün portföyümüz, modern endüstriyel süreçleri desteklemek amacıyla yüksek performans, dayanıklılık ve verimlilik ilkeleri doğrultusunda tasarlanmış çözümlerden oluşur.
Tüm ürünlerimiz, zorlu çalışma koşullarında dahi maksimum güvenilirlik sunar ve işletmenizin operasyonlarını sorunsuz şekilde sürdürmesine yardımcı olur. Endüstriyel otomasyon, enerji yönetimi, kablolama çözümleri ve daha birçok alanda sunduğumuz ürünler, farklı sektörlerdeki ihtiyaçlara esneklikle uyum sağlar.
Ayrıca, ürünlerimiz sadece kaliteli malzemelerle üretilmiş olup, uluslararası standartlara uygunluk göstermektedir. Müşterilerimize sunduğumuz çözümlerle, operasyonel verimliliklerini artırmalarına ve maliyetlerini optimize etmelerine olanak tanıyoruz. Teknolojik gelişmeleri yakından takip eden firmamız, sürekli olarak yenilikçi ürünler sunarak, müşterilerimizin rekabet avantajı elde etmesine destek vermektedir.
Her bir ürün sayfamızda, teknik detaylar, kullanım alanları ve ürün özelliklerine dair kapsamlı bilgilere ulaşabilirsiniz. Endüstriyel süreçlerinizi güçlendirmek için ihtiyacınız olan tüm ürünleri sitemizden keşfedebilir, sorunsuz bir satın alma deneyimi yaşayabilirsiniz.