EU1S-SWD-PF1-2
174724 EU1S-SWD-PF1-2
174724

SWD ağında 4 A beslemesi için 24VDC için SWD güç kaynağı IP67
SmartWire-DT ağı için 24 VDC beslemeyi beslemek, SmartWire-DT modüllerine ve bağlı sensörlere/aktüatörlere güç vermek için IP67 koruma derecesine sahip SmartWire-DT güç besleyici modülü, maks. 4A

Product range	SmartWire-DT accessories
Basic function	SmartWire-DT power supply
Function	For feeding supply voltage in order to connect additional SmartWire-DT modules (IP 67) and connected sensors/actuators
Description	SmartWire-DT power supply with IP67 degree of protection for feeding the 24 VDC (4 A) supply voltage for the SmartWire-DT network to the next segment For powering SmartWire-DT modules and connected sensors/actuators
Connection to SmartWire-DT	yes
Information relevant for export to North America	UL File No. E29184 UL Category Control No. NKCR CSA File No. 2324643 CSA Class No. 3211-07 North America Certification UL listed, CSA certified
Standards	IEC/EN 61131-2, EN50178, IEC/EN 60529
Dimensions (W x H x D)	85.6 x 20.1 x 56.9 mm
Weight	0.1 kg
Mounting	DIN-rail, screw fixing (M4), mounting section (Clip M20)
Mounting position	As required
Protection type (IEC/EN 60529, EN50178, VBG 4)	IP69K
Vibrations (IEC/EN 61131-2:2008) >Constant amplitude 3,5 mm	5 - 8.4 Hz
Vibrations (IEC/EN 61131-2:2008) >Constant acceleration 1 g	8.4 - 150 Hz
Mechanical shock resistance (IEC/EN 60068-2-27) semi-sinusoidal 15 g/11 ms	9 Impacts
Drop to IEC/EN 60068-2-31 [Drop height]	50 mm
Free fall, packaged (IEC/EN 60068-2-32)	0.3 m
Overvoltage category	II
Pollution degree	3
Electrostatic discharge (IEC/EN 61131-2:2008) >Air discharge (Level 3)	8 kV
Electrostatic discharge (IEC/EN 61131-2:2008) >Contact discharge (Level 2)	4 kV
Electromagnetic fields (IEC/EN 61131-2:2008) >80 - 1000 MHz	10 V/m
Electromagnetic fields (IEC/EN 61131-2:2008) >1.4 - 2 GHz	3 V/m
Electromagnetic fields (IEC/EN 61131-2:2008) >2 - 2.7 GHz	1 V/m
Radio interference suppression (SmartWire-DT)	Class A
Burst (IEC/EN 61131-2:2008, Level 3) >Supply cable	2 kV
Burst (IEC/EN 61131-2:2008, Level 3) >CAN/DP bus cable	1 kV
Burst (IEC/EN 61131-2:2008, Level 3) >SmartWire-DT cable	1 kV
Surge (IEC/EN 61131-2:2008, Level 1) >Supply cables/CAN/DP bus cable >Surge power cables	0.5 kV
Surge (IEC/EN 61131-2:2008, Level 1) >Supply cables/CAN/DP bus cable >Surge	Supply cables 0.5 kV
Radiated RFI (IEC/EN 61131-2:2008, Level 3)	10 V
Climatic proofing	Dry heat to IEC 60068-2-2 Damp heat as per EN 60068-2-3
Air pressure (operation)	795 - 1080 hPa
Ambient temperature >Operating ambient temperature (IEC 60068-2)	-25 - +70 °C
Ambient temperature >Storage	- 40 - + 70 °C
Relative humidity >Condensation	permissible
Rated operational voltage [UAux]	24 V DC (-15/+20%) V
Residual ripple on the input voltage	≦ 5 %
Protection against polarity reversal	Yes
Max. current [Imax]	4 A
Short-circuit rating	no, external fuse FAZ Z3
Power loss [P]	Normally 1 W
Potential isolation	No
Rated operating voltage of 24-V-DC slaves	typ. UAux - 0.2 V
Connection type	5-pin M12 socket (A-keyed)
Connections	Socket, plug M12 (A-keyed), 5 pole
Plug connectors	SWD4-SM5-67 SWD4-SF5-67
Other technical data (sheet catalogue)	Technical data
Rated operational current for specified heat dissipation [In]	0 A
Heat dissipation per pole, current-dependent [Pvid]	0 W
Equipment heat dissipation, current-dependent [Pvid]	0 W
Static heat dissipation, non-current-dependent [Pvs]	1 W
Heat dissipation capacity [Pdiss]	0 W
Operating ambient temperature min.	-25 °C
Operating ambient temperature max.	+70 °C
Degree of Protection	IP69K
10.2 Strength of materials and parts >10.2.2 Corrosion resistance	Meets the product standard´s requirements.
10.2 Strength of materials and parts >10.2.3.1 Verification of thermal stability of enclosures	Meets the product standard´s requirements.
10.2 Strength of materials and parts >10.2.3.2 Verification of resistance of insulating materials to normal heat	Meets the product standard´s requirements.
10.2 Strength of materials and parts >10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects	Meets the product standard´s requirements.
10.2 Strength of materials and parts >10.2.4 Resistance to ultra-violet (UV) radiation	Meets the product standard´s requirements.
10.2 Strength of materials and parts >10.2.5 Lifting	Does not apply, since the entire switchgear needs to be evaluated.
10.2 Strength of materials and parts >10.2.6 Mechanical impact	Does not apply, since the entire switchgear needs to be evaluated.
10.2 Strength of materials and parts >10.2.7 Inscriptions	Meets the product standard´s requirements.
10.3 Degree of protection of ASSEMBLIES	Meets the product standard´s requirements.
10.4 Clearances and creepage distances	Meets the product standard´s requirements.
10.5 Protection against electric shock	Does not apply, since the entire switchgear needs to be evaluated.
10.6 Incorporation of switching devices and components	Does not apply, since the entire switchgear needs to be evaluated.
10.7 Internal electrical circuits and connections	Is the panel builder´s responsibility.
10.8 Connections for external conductors	Is the panel builder´s responsibility.
10.9 Insulation properties >10.9.2 Power-frequency electric strength	Is the panel builder´s responsibility.
10.9 Insulation properties >10.9.3 Impulse withstand voltage	Is the panel builder´s responsibility.
10.9 Insulation properties >10.9.4 Testing of enclosures made of insulating material	Is the panel builder´s responsibility.
10.10 Temperature rise	The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
10.11 Short-circuit rating	Is the panel builder´s responsibility.
10.12 Electromagnetic compatibility	Is the panel builder´s responsibility.
10.13 Mechanical function	The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
Supply voltage AC 50 Hz	0 - 0 V
Supply voltage AC 60 Hz	0 - 0 V
Supply voltage DC	20.4 - 28.8 V
Voltage type of supply voltage	DC
Number of HW-interfaces industrial Ethernet	0
Number of interfaces PROFINET	0
Number of HW-interfaces RS-232	0
Number of HW-interfaces RS-422	0
Number of HW-interfaces RS-485	0
Number of HW-interfaces serial TTY	0
Number of HW-interfaces parallel	0
Number of HW-interfaces Wireless	0
Number of HW-interfaces USB	0
Number of HW-interfaces other	1
With optical interface	No
Supporting protocol for TCP/IP	No
Supporting protocol for PROFIBUS	No
Supporting protocol for CAN	No
Supporting protocol for INTERBUS	No
Supporting protocol for ASI	No
Supporting protocol for KNX	No
Supporting protocol for MODBUS	No
Supporting protocol for Data-Highway	No
Supporting protocol for DeviceNet	No
Supporting protocol for SUCONET	No
Supporting protocol for LON	No
Supporting protocol for PROFINET IO	No
Supporting protocol for PROFINET CBA	No
Supporting protocol for SERCOS	No
Supporting protocol for Foundation Fieldbus	No
Supporting protocol for EtherNet/IP	No
Supporting protocol for AS-Interface Safety at Work	No
Supporting protocol for DeviceNet Safety	No
Supporting protocol for INTERBUS-Safety	No
Supporting protocol for PROFIsafe	No
Supporting protocol for SafetyBUS p	No
Supporting protocol for other bus systems	Yes
Radio standard Bluetooth	No
Radio standard WLAN 802.11	No
Radio standard GPRS	No
Radio standard GSM	No
Radio standard UMTS	No
System accessory	Yes
Degree of protection (IP)	IP67
Type of electric connection	Plug-in connection
With potential separation	Yes
With power supply module	Yes
Suitable as segment module	Yes
Remote module	No
Fieldbus connection over separate bus coupler possible	Yes
Bus diagnosis possible	No
Rail mounting possible	Yes
Wall mounting/direct mounting	Yes
Front build in possible	No
Rack-assembly possible	No
Suitable for safety functions	No
Category according to EN 954-1
SIL according to IEC 61508	None
Performance level acc. EN ISO 13849-1	None
Appendant operation agent (Ex ia)	No
Appendant operation agent (Ex ib)	No
Explosion safety category for gas	None
Explosion safety category for dust	None
Width	85.6 mm
Height	56.9 mm
Depth	20.1 mm
UL File No.	E29184
UL Category Control No.	NKCR
CSA File No.	2324643
CSA Class No.	3211-07
North America Certification	UL listed, CSA certified
Specially designed for North America	No

Mnelko olarak, endüstriyel otomasyon çözümlerinde güvenilir bir iş ortağı olarak, geniş ürün yelpazesi ile işletmenizin tüm ihtiyaçlarını karşılamaya yönelik kaliteli ve yenilikçi ürünler sunmaktayız. Ürün portföyümüz, modern endüstriyel süreçleri desteklemek amacıyla yüksek performans, dayanıklılık ve verimlilik ilkeleri doğrultusunda tasarlanmış çözümlerden oluşur.
Tüm ürünlerimiz, zorlu çalışma koşullarında dahi maksimum güvenilirlik sunar ve işletmenizin operasyonlarını sorunsuz şekilde sürdürmesine yardımcı olur. Endüstriyel otomasyon, enerji yönetimi, kablolama çözümleri ve daha birçok alanda sunduğumuz ürünler, farklı sektörlerdeki ihtiyaçlara esneklikle uyum sağlar.
Ayrıca, ürünlerimiz sadece kaliteli malzemelerle üretilmiş olup, uluslararası standartlara uygunluk göstermektedir. Müşterilerimize sunduğumuz çözümlerle, operasyonel verimliliklerini artırmalarına ve maliyetlerini optimize etmelerine olanak tanıyoruz. Teknolojik gelişmeleri yakından takip eden firmamız, sürekli olarak yenilikçi ürünler sunarak, müşterilerimizin rekabet avantajı elde etmesine destek vermektedir.
Her bir ürün sayfamızda, teknik detaylar, kullanım alanları ve ürün özelliklerine dair kapsamlı bilgilere ulaşabilirsiniz. Endüstriyel süreçlerinizi güçlendirmek için ihtiyacınız olan tüm ürünleri sitemizden keşfedebilir, sorunsuz bir satın alma deneyimi yaşayabilirsiniz.