Product range |
Electronic motor starter |
Product range |
SmartWire-DT slave |
Subrange |
SmartWire-DT electronic motor starters |
Basic function |
DOL starters (complete devices) |
Function |
For connecting to SmartWire-DT for expanded diagnostics |
Description |
DOL starting Motor protection Circuit design: safety output stage with bypass, three-phase disconnect. Motor current additionally adjustable via SmartWire-DT. |
Messages |
Operational readiness Operating direction feedback Motor current in % Motor current in A Thermal motor image in % Overload prewarning Trip indications (overload, phase failure, etc.) Set short-circuit release value Device Type |
Commands |
Operating the motor starter Manual reset Automatic reset |
Max. rating for three-phase motors, 50 - 60 Hz >AC-53a >380 V 400 V 415 V [P] |
|
Setting range of overload releases [Ir] |
0.55 - 3 kW |
Actuating voltage |
1,5 - 7 (AC-53a) 1,5 - 9 (AC-51) A_x |
Connection technique |
24 V DC |
Connection to SmartWire-DT |
Push in terminals |
Standards |
yes |
Ambient temperature >Storage >Min. ambient temperature, storage |
|
Ambient temperature >Storage >Ambient temperature, storage max. |
IEC/EN 60947-4-2 UL508 |
Ambient temperature >Open >Operating ambient temperature min. |
- 40 °C |
Ambient temperature >Open >Operating ambient temperature max. |
+ 80 °C |
Weight |
-5 °C |
Mounting |
+55 °C |
Protection type (IEC/EN 60529, EN50178, VBG 4) |
0.22 kg |
Mounting position |
Top-hat rail IEC/EN 60715, 35 mm |
Terminal capacity >Push-in terminals |
IP20 |
Terminal capacity >Push-in terminals |
Vertical Motor feeder at bottom |
Rated operational voltage [Ue] |
0.2 - 2.5 mm2
|
Operational voltage range >Operating voltage range min. |
24 - 14 AWG |
Operational voltage range >Operating voltage range max. |
|
Rated operational current >AC-51 [Ie] |
500 V AC |
Rated operational current >AC-53a [Ie] |
42 V |
Rated operational current |
550 V |
Rated operational current >Setting range of overload releases [Ir] |
9 A |
Release class |
7 A |
Heat dissipation [PV] |
AC-53a: Please note possible derating. |
Rated control voltage [Us
] |
1,5 - 7 (AC-53a) 1,5 - 9 (AC-51) A_x |
Control voltage range |
10A CLASS |
Residual ripple on the input voltage |
1 - 12 W |
Rated control current [Is] |
|
Current draw inrush |
24 V DC |
Actuating circuit (ON, L, R) >Rated actuation voltage [Uc
] |
19,2 - 30 V DC V |
Actuating circuit (ON, L, R) >Switching level "Low" |
≦ 5 % |
Actuating circuit (ON, L, R) >Switching level "confirm Off" |
60 mA |
Actuating circuit (ON, L, R) >Switching level "High" |
120 mA |
Actuating circuit (ON, L, R) >Rated actuating current [Ic] |
24 V |
Radio interference suppression |
-3 - +9.6 V DC V |
Rated operational current for specified heat dissipation [In] |
< 5 V DC V |
Heat dissipation per pole, current-dependent [Pvid] |
19.2 - 30 V DC V |
Equipment heat dissipation, current-dependent [Pvid] |
7 mA |
Static heat dissipation, non-current-dependent [Pvs] |
|
Heat dissipation capacity [Pdiss] |
EN 55011 EN 61000-6-3, Class A (emitted interference, radiated) |
Operating ambient temperature min. |
|
Operating ambient temperature max. |
9 A |
10.2 Strength of materials and parts >10.2.2 Corrosion resistance |
0 W |
10.2 Strength of materials and parts >10.2.3.1 Verification of thermal stability of enclosures |
12 W |
10.2 Strength of materials and parts >10.2.3.2 Verification of resistance of insulating materials to normal heat |
2 W |
10.2 Strength of materials and parts >10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects |
0 W |
10.2 Strength of materials and parts >10.2.4 Resistance to ultra-violet (UV) radiation |
-5 °C |
10.2 Strength of materials and parts >10.2.5 Lifting |
+55 °C |
10.2 Strength of materials and parts >10.2.6 Mechanical impact |
If necessary, Allow for derating |
10.2 Strength of materials and parts >10.2.7 Inscriptions |
|
10.3 Degree of protection of ASSEMBLIES |
Meets the product standard´s requirements. |
10.4 Clearances and creepage distances |
Meets the product standard´s requirements. |
10.5 Protection against electric shock |
Meets the product standard´s requirements. |
10.6 Incorporation of switching devices and components |
Meets the product standard´s requirements. |
10.7 Internal electrical circuits and connections |
Meets the product standard´s requirements. |
10.8 Connections for external conductors |
Does not apply, since the entire switchgear needs to be evaluated. |
10.9 Insulation properties >10.9.2 Power-frequency electric strength |
Does not apply, since the entire switchgear needs to be evaluated. |
10.9 Insulation properties >10.9.3 Impulse withstand voltage |
Meets the product standard´s requirements. |
10.9 Insulation properties >10.9.4 Testing of enclosures made of insulating material |
Does not apply, since the entire switchgear needs to be evaluated. |
10.10 Temperature rise |
Meets the product standard´s requirements. |
10.11 Short-circuit rating |
Does not apply, since the entire switchgear needs to be evaluated. |
10.12 Electromagnetic compatibility |
Does not apply, since the entire switchgear needs to be evaluated. |
10.13 Mechanical function |
Is the panel builder´s responsibility. |
Kind of motor starter |
Is the panel builder´s responsibility. |
With short-circuit release |
Is the panel builder´s responsibility. |
Rated control supply voltage Us at AC 50HZ |
Is the panel builder´s responsibility. |
Rated control supply voltage Us at AC 60HZ |
Is the panel builder´s responsibility. |
Rated control supply voltage Us at DC |
The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices. |
Voltage type for actuating |
Is the panel builder´s responsibility. The specifications for the switchgear must be observed. |
Rated operation power at AC-3, 230 V, 3-phase |
Is the panel builder´s responsibility. The specifications for the switchgear must be observed. |
Rated operation power at AC-3, 400 V |
The device meets the requirements, provided the information in the instruction leaflet (IL) is observed. |
Rated power, 460 V, 60 Hz, 3-phase |
|
Rated power, 575 V, 60 Hz, 3-phase |
|
Rated operation current Ie |
Reversing starter |
Rated operation current at AC-3, 400 V |
No |
Overload release current setting |
0 - 0 V |
Rated conditional short-circuit current, type 1, 480 Y/277 V |
0 - 0 V |
Rated conditional short-circuit current, type 1, 600 Y/347 V |
24 - 24 V |
Rated conditional short-circuit current, type 2, 230 V |
DC |
Rated conditional short-circuit current, type 2, 400 V |
0.55 kW |
Number of auxiliary contacts as normally open contact |
1.1 kW |
Number of auxiliary contacts as normally closed contact |
0 kW |
Ambient temperature, upper operating limit |
0 kW |
Temperature compensated overload protection |
3 A |
Release class |
3 A |
Type of electrical connection of main circuit |
0.18 - 3 A |
Type of electrical connection for auxiliary- and control current circuit |
0 A |
Rail mounting possible |
0 A |
With transformer |
0 A |
Number of command positions |
0 A |
Suitable for emergency stop |
0 |
Coordination class according to IEC 60947-4-3 |
0 |
Number of indicator lights |
40 °C |
External reset possible |
Yes |
With fuse |
CLASS 10 |
Degree of protection (IP) |
Spring clamp connection |
Degree of protection (NEMA) |
Spring clamp connection |
Supporting protocol for TCP/IP |
Yes |
Supporting protocol for PROFIBUS |
No |
Supporting protocol for CAN |
|
Supporting protocol for INTERBUS |
No |
Supporting protocol for ASI |
|
Supporting protocol for MODBUS |
5 |
Supporting protocol for Data-Highway |
Yes |
Supporting protocol for DeviceNet |
No |
Supporting protocol for SUCONET |
IP20 |
Supporting protocol for LON |
Other |
Supporting protocol for PROFINET IO |
No |
Supporting protocol for PROFINET CBA |
No |
Supporting protocol for SERCOS |
No |
Supporting protocol for Foundation Fieldbus |
No |
Supporting protocol for EtherNet/IP |
No |
Supporting protocol for AS-Interface Safety at Work |
No |
Supporting protocol for DeviceNet Safety |
No |
Supporting protocol for INTERBUS-Safety |
No |
Supporting protocol for PROFIsafe |
No |
Supporting protocol for SafetyBUS p |
No |
Supporting protocol for other bus systems |
No |
Width |
No |
Height |
No |
Depth |
No |
Product Standards |
No |
UL File No. |
No |
UL Category Control No. |
No |
CSA File No. |
No |
North America Certification |
No |
Specially designed for North America |
No |
Characteristic curve |
Yes |
Characteristic curve |
22.5 mm |
Characteristic curve |
112.5 mm |