Product range	Accessories
Single unit/Complete unit	Single unit
Basic function accessories	Contact elements
Connection technique	Blade terminal
Description	admissible operating voltage: 5 – 250 V
N/O = Normally open	1 N/O
Contact sequence
Contact travel diagram, stroke in connection with front element
Degree of Protection	IP20 with ISH2,8
Connection to SmartWire-DT	no
Standards	IEC/EN 60947
Lifespan, mechanical [Operations]	> 100 x 106
Operating frequency [Operations/h]	≦ 3600
Actuating force	≦ 3 n
Degree of protection, IEC/EN 60529	IP20 with ISH2,8
Climatic proofing	Damp heat, constant, to IEC 60068-2-78 Damp heat, cyclic, to IEC 60068-2-30
Ambient temperature >Open	-25 - +60 °C
Ambient temperature >Enclosed	- 25 - 40 °C
Mounting position	As required
Mechanical shock resistance	> 40 according to IEC 60068-2-27 Shock duration 11 ms Sinusoidal g
Terminal capacities	0.5 - 1.0 mm2
Blade terminal	2.8 x 0.8 mm to DIN 46244
Fast-on connectors	2.8 x 0.8 mm to DIN 46247 and IEC 60760
Rated impulse withstand voltage [Uimp]	4000 V AC
Rated insulation voltage [Ui ]	250 V
Overvoltage category/pollution degree	III/3
Rated operational voltage [Ue]	250 V AC
Control circuit reliability >at 24 V DC/5 mA [HF ]	< 10-7 (i.e. 1 failure to 107 operations) Fault probability
Control circuit reliability >at 5 V DC/1 mA [HF ]	< 5 x 10-6 (i.e. 1 failure in 5 x 106 operations) Fault probability
Use of insulated ferrule ISH 2,8	>24 V AC/DC recommended >50 V AC or 120 V DC is mandatory, even on unused blade terminals
Max. short-circuit protective device >Fuseless	FAZ-B6/1 Type
Max. short-circuit protective device >Fuse [gG/gL]	10 A
Rated operational current [Ie ] >AC-15 >24 V [Ie ]	4 A
Rated operational current [Ie ] >AC-15 >48 V [Ie ]	4 A
Rated operational current [Ie ] >AC-15 >110 V [Ie ]	4 A
Rated operational current [Ie ] >AC-15 >220 V 230 V 240 V [Ie]	4 A
Rated operational current [Ie ] >DC-13 >24 V [Ie ]	1.5 A
Rated operational current [Ie ] >DC-13 >42 V [Ie ]	1 A
Rated operational current [Ie ] >DC-13 >60 V [Ie ]	0.8 A
Rated operational current [Ie ] >DC-13 >110 V [Ie ]	0.5 A
Rated operational current [Ie ] >DC-13 >220 V [Ie ]	0.2 A
Lifespan, electrical AC-15 to IEC/EN 60947-5-1 at 230 V; Ie = rated operational current
Rated operational current for specified heat dissipation [In]	4 A
Heat dissipation per pole, current-dependent [Pvid]	0.1 W
Equipment heat dissipation, current-dependent [Pvid]	0 W
Static heat dissipation, non-current-dependent [Pvs]	0 W
Heat dissipation capacity [Pdiss]	0 W
Operating ambient temperature min.	-25 °C
Operating ambient temperature max.	+60 °C
10.2 Strength of materials and parts >10.2.2 Corrosion resistance	Meets the product standard´s requirements.
10.2 Strength of materials and parts >10.2.3.1 Verification of thermal stability of enclosures	Meets the product standard´s requirements.
10.2 Strength of materials and parts >10.2.3.2 Verification of resistance of insulating materials to normal heat	Meets the product standard´s requirements.
10.2 Strength of materials and parts >10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects	Meets the product standard´s requirements.
10.2 Strength of materials and parts >10.2.4 Resistance to ultra-violet (UV) radiation	Meets the product standard´s requirements.
10.2 Strength of materials and parts >10.2.5 Lifting	Does not apply, since the entire switchgear needs to be evaluated.
10.2 Strength of materials and parts >10.2.6 Mechanical impact	Does not apply, since the entire switchgear needs to be evaluated.
10.2 Strength of materials and parts >10.2.7 Inscriptions	Meets the product standard´s requirements.
10.3 Degree of protection of ASSEMBLIES	Does not apply, since the entire switchgear needs to be evaluated.
10.4 Clearances and creepage distances	Meets the product standard´s requirements.
10.5 Protection against electric shock	Does not apply, since the entire switchgear needs to be evaluated.
10.6 Incorporation of switching devices and components	Does not apply, since the entire switchgear needs to be evaluated.
10.7 Internal electrical circuits and connections	Is the panel builder´s responsibility.
10.8 Connections for external conductors	Is the panel builder´s responsibility.
10.9 Insulation properties >10.9.2 Power-frequency electric strength	Is the panel builder´s responsibility.
10.9 Insulation properties >10.9.3 Impulse withstand voltage	Is the panel builder´s responsibility.
10.9 Insulation properties >10.9.4 Testing of enclosures made of insulating material	Is the panel builder´s responsibility.
10.10 Temperature rise	The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
10.11 Short-circuit rating	Is the panel builder´s responsibility. The specifications for the switchgear must be observed.
10.12 Electromagnetic compatibility	Is the panel builder´s responsibility. The specifications for the switchgear must be observed.
10.13 Mechanical function	The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
Number of contacts as change-over contact	0
Number of contacts as normally open contact	1
Number of contacts as normally closed contact	0
Number of fault-signal switches	0
Rated operation current Ie at AC-15, 230 V	6 A
Type of electric connection	Screw connection
Model	Top mounting
Mounting method	Front fastening
Lamp holder	None
Product Standards	IEC/EN 60947-5; UL 508; CSA-C22.2 No. 14-05; CE marking
UL File No.	E29184
UL Category Control No.	NKCR
CSA File No.	46552
CSA Class No.	3211-03
North America Certification	UL listed, CSA certified

Mnelko olarak, endüstriyel otomasyon çözümlerinde güvenilir bir iş ortağı olarak, geniş ürün yelpazesi ile işletmenizin tüm ihtiyaçlarını karşılamaya yönelik kaliteli ve yenilikçi ürünler sunmaktayız. Ürün portföyümüz, modern endüstriyel süreçleri desteklemek amacıyla yüksek performans, dayanıklılık ve verimlilik ilkeleri doğrultusunda tasarlanmış çözümlerden oluşur.
Tüm ürünlerimiz, zorlu çalışma koşullarında dahi maksimum güvenilirlik sunar ve işletmenizin operasyonlarını sorunsuz şekilde sürdürmesine yardımcı olur. Endüstriyel otomasyon, enerji yönetimi, kablolama çözümleri ve daha birçok alanda sunduğumuz ürünler, farklı sektörlerdeki ihtiyaçlara esneklikle uyum sağlar.
Ayrıca, ürünlerimiz sadece kaliteli malzemelerle üretilmiş olup, uluslararası standartlara uygunluk göstermektedir. Müşterilerimize sunduğumuz çözümlerle, operasyonel verimliliklerini artırmalarına ve maliyetlerini optimize etmelerine olanak tanıyoruz. Teknolojik gelişmeleri yakından takip eden firmamız, sürekli olarak yenilikçi ürünler sunarak, müşterilerimizin rekabet avantajı elde etmesine destek vermektedir.
Her bir ürün sayfamızda, teknik detaylar, kullanım alanları ve ürün özelliklerine dair kapsamlı bilgilere ulaşabilirsiniz. Endüstriyel süreçlerinizi güçlendirmek için ihtiyacınız olan tüm ürünleri sitemizden keşfedebilir, sorunsuz bir satın alma deneyimi yaşayabilirsiniz.