Motor bobini, üç fazlı, 750 V + %0 (0 - 400 Hz), V AC, 50 A, 0,6 mH Üç fazlı motor bobini maks. izin verilen şebeke voltajı 750V AC nominal çalışma akımı 50A reaktör 0,6mH
Motor bobini, üç fazlı, 750 V + %0 (0 - 400 Hz), V AC, 50 A, 0,6 mH
Üç fazlı motor bobini maks. izin verilen şebeke voltajı 750V AC nominal çalışma akımı 50A reaktör 0,6mH
| Product range | Accessories |
| Accessories | Motor chokes |
| Description | three-phase |
| For use with | DC1, DA1, DG1, SVX, SPX |
| Max. permissible connection voltage | 750 V + 0% (0 - 400 Hz) V AC |
| Rated operational current [Ie] | 50 A |
| Inductance [L] | 0.6 mH |
| (12 kHz) [Pv] | |
| Standards | 168 W |
| Operating temperature | |
| Storage temperature [ϑ] | IEC/EN 61558-2-20-2000, VDE 0570 Part 2-20/2001-04, UL, CSA |
| Mechanical shock resistance | -25 to +40, up to 70 with current derating (see the note) °C |
| Vibration resistance | -25 - +85 °C |
| Vibration | 11 ms2/15 3 shocks g |
| Altitude | 1 (0 - 150 Hz) g |
| Mounting position | 0.35 mm at 10 - 55 Hz |
| Free surrounding areas | 0 – 1000 above sea level, up to 5000 with current reduction (see notes) m |
| Degree of Protection | Standing vertically, suspended horizontally |
| Rated duty factor | < 50 MM |
| Weight | IP20 (terminal) |
| Rated operational voltage | 100 % DF |
| Max. supply voltage | 12.3 kg |
| Operating frequency [f] | |
| Insulation class | 3 AC 400 V |
| Rated operational current [Ie] | 750 V + 0% (0 - 400 Hz) V AC |
| Inductance [L] | 0…200 Hz |
| max. heat dissipation (pulse frequency) >(3 kHz) [Pv] |
B |
| max. heat dissipation (pulse frequency) >(5 kHz) [Pv] |
50 A |
| max. heat dissipation (pulse frequency) >(12 kHz) [Pv] |
0.6 mH |
| Terminations | 110 W |
| PE stud | 157 W |
| Terminal | 168 W |
| Terminal | |
| Tightening torque | ✓ |
| Rated operational current for specified heat dissipation [In] | ✓ |
| Heat dissipation per pole, current-dependent [Pvid] | 10 mm2 |
| Equipment heat dissipation, current-dependent [Pvid] | 20 - 6 AWG |
| Static heat dissipation, non-current-dependent [Pvs] | 1.5 Nm |
| Heat dissipation capacity [Pdiss] | |
| Operating ambient temperature min. | The following applies for the installation altitude: Derating with respect to the rated operational current Ie:
|
| Operating ambient temperature max. | |
| 10.2 Strength of materials and parts >10.2.2 Corrosion resistance |
50 A |
| 10.2 Strength of materials and parts >10.2.3.1 Verification of thermal stability of enclosures |
0 W |
| 10.2 Strength of materials and parts >10.2.3.2 Verification of resistance of insulating materials to normal heat |
110 W |
| 10.2 Strength of materials and parts >10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects |
0 W |
| 10.2 Strength of materials and parts >10.2.4 Resistance to ultra-violet (UV) radiation |
0 W |
| 10.2 Strength of materials and parts >10.2.5 Lifting |
-25 °C |
| 10.2 Strength of materials and parts >10.2.6 Mechanical impact |
+40 °C |
| 10.2 Strength of materials and parts >10.2.7 Inscriptions |
|
| 10.3 Degree of protection of ASSEMBLIES | Meets the product standard´s requirements. |
| 10.4 Clearances and creepage distances | Meets the product standard´s requirements. |
| 10.5 Protection against electric shock | Meets the product standard´s requirements. |
| 10.6 Incorporation of switching devices and components | Meets the product standard´s requirements. |
| 10.7 Internal electrical circuits and connections | Meets the product standard´s requirements. |
| 10.8 Connections for external conductors | Does not apply, since the entire switchgear needs to be evaluated. |
| 10.9 Insulation properties >10.9.2 Power-frequency electric strength |
Does not apply, since the entire switchgear needs to be evaluated. |
| 10.9 Insulation properties >10.9.3 Impulse withstand voltage |
Meets the product standard´s requirements. |
| 10.9 Insulation properties >10.9.4 Testing of enclosures made of insulating material |
Does not apply, since the entire switchgear needs to be evaluated. |
| 10.10 Temperature rise | Meets the product standard´s requirements. |
| 10.11 Short-circuit rating | Does not apply, since the entire switchgear needs to be evaluated. |
| 10.12 Electromagnetic compatibility | Does not apply, since the entire switchgear needs to be evaluated. |
| 10.13 Mechanical function | Is the panel builder´s responsibility. |
| Suitable as interference suppression reactance coil | Is the panel builder´s responsibility. |
| Suitable as net reactance coil | Is the panel builder´s responsibility. |
| Suitable as commutation reactance coil | Is the panel builder´s responsibility. |
| Suitable as ripple filter choke | Is the panel builder´s responsibility. |
| Suitable as output reactance coil | The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices. |
| Number of poles, primary side | Is the panel builder´s responsibility. The specifications for the switchgear must be observed. |
| Rated clock frequency | Is the panel builder´s responsibility. The specifications for the switchgear must be observed. |
| Rated operation frequency | The device meets the requirements, provided the information in the instruction leaflet (IL) is observed. |
| Max. rated operation voltage Ue | |
| Rated current at AC | |
| Max. rated current (Ith) at rated voltage DC | No |
| Rated inductance | No |
| Degree of protection (IP) | No |
| Relative short circuit voltage | Yes |
| Resonance frequency | No |
| Degree of protection (NEMA) | 3 |
| Product Standards | 0 kHz |
| UL File No. | 0 - 200 Hz |
| UL Category Control No. | 750 V |
| CSA File No. | 50 - 50 A |
| North America Certification | 50 A |
| Specially designed for North America | 0.6 mH |
| Suitable for | IP20 |
| Max. Voltage Rating | 0 % |
| Degree of Protection | 0 Hz |
Mnelko olarak, endüstriyel otomasyon çözümlerinde güvenilir bir iş ortağı olarak, geniş ürün yelpazesi ile işletmenizin tüm ihtiyaçlarını karşılamaya yönelik kaliteli ve yenilikçi ürünler sunmaktayız. Ürün portföyümüz, modern endüstriyel süreçleri desteklemek amacıyla yüksek performans, dayanıklılık ve verimlilik ilkeleri doğrultusunda tasarlanmış çözümlerden oluşur.
Tüm ürünlerimiz, zorlu çalışma koşullarında dahi maksimum güvenilirlik sunar ve işletmenizin operasyonlarını sorunsuz şekilde sürdürmesine yardımcı olur. Endüstriyel otomasyon, enerji yönetimi, kablolama çözümleri ve daha birçok alanda sunduğumuz ürünler, farklı sektörlerdeki ihtiyaçlara esneklikle uyum sağlar.
Ayrıca, ürünlerimiz sadece kaliteli malzemelerle üretilmiş olup, uluslararası standartlara uygunluk göstermektedir. Müşterilerimize sunduğumuz çözümlerle, operasyonel verimliliklerini artırmalarına ve maliyetlerini optimize etmelerine olanak tanıyoruz. Teknolojik gelişmeleri yakından takip eden firmamız, sürekli olarak yenilikçi ürünler sunarak, müşterilerimizin rekabet avantajı elde etmesine destek vermektedir.
Her bir ürün sayfamızda, teknik detaylar, kullanım alanları ve ürün özelliklerine dair kapsamlı bilgilere ulaşabilirsiniz. Endüstriyel süreçlerinizi güçlendirmek için ihtiyacınız olan tüm ürünleri sitemizden keşfedebilir, sorunsuz bir satın alma deneyimi yaşayabilirsiniz.
Tüm hakları saklıdır. Mnelko Endüstriyel San. ve Tic.Ltd.Şti. 2024
