Yumuşak yol verici, 70 A, 200 - 480 V AC, 24 V DC, Çerçeve boyutu: FS3, İletişim Arayüzleri: SmartWire-DT Yumuşak yol verici, Ürün yelpazesi: SmartWire-DT bağımlı, Açıklama: Dahili bypass kontaklı, Fonksiyon: Üç fazlı yükler için yumuşak yol vericiler, Şebeke besleme gerilimi (50/60 Hz): ULN= 200 - 480 V AC, Besleme gerilimi: Us = 24 V DC, Kontrol voltajı: UC= 24 V DC, Atanan motor gücü (Standart bağlantı, Hat içi) 400 V, 50 Hz'de: P= 37 kW, 460 V, 60 Hz'de: P= 50 HP, Nominal çalışma akımı AC-53: Ie= 70 A, Nominal çalışma gerilimi: Ue= 200 V, 230 V, 400 V, 480 V, SmartWire-DT'ye bağlantı: evet, Çerçeve boyutu: FS3, Standartlar: IEC/EN 60947-4 -2, UL 508, CSA22.2-14
Yumuşak yol verici, 70 A, 200 - 480 V AC, 24 V DC, Çerçeve boyutu: FS3, İletişim Arayüzleri: SmartWire-DT
Yumuşak yol verici, Ürün yelpazesi: SmartWire-DT bağımlı, Açıklama: Dahili bypass kontaklı, Fonksiyon: Üç fazlı yükler için yumuşak yol vericiler, Şebeke besleme gerilimi (50/60 Hz): ULN= 200 - 480 V AC, Besleme gerilimi: Us = 24 V DC, Kontrol voltajı: UC= 24 V DC, Atanan motor gücü (Standart bağlantı, Hat içi) 400 V, 50 Hz'de: P= 37 kW, 460 V, 60 Hz'de: P= 50 HP, Nominal çalışma akımı AC-53: Ie= 70 A, Nominal çalışma gerilimi: Ue= 200 V, 230 V, 400 V, 480 V, SmartWire-DT'ye bağlantı: evet, Çerçeve boyutu: FS3, Standartlar: IEC/EN 60947-4 -2, UL 508, CSA22.2-14
Product range | SmartWire-DT slave |
Subrange | SmartWire-DT Soft starters |
Description | With internal bypass contacts |
Function | Soft starters for three-phase loads |
Mains supply voltage (50/60 Hz) [ULN] | 200 - 480 V AC |
Supply voltage [Us] | 24 V DC |
Control voltage [UC] | 24 V DC |
at 400 V, 50 Hz [P] | 37 kW |
at 460 V, 60 Hz [P] | 50 HP |
AC-53 [Ie] | 70 A |
Rated operational voltage [Ue] | 200 V 230 V 400 V 480 V |
Connection to SmartWire-DT | yes |
Frame size | FS3 |
Standards | IEC/EN 60947-4-2 UL 508 CSA22.2-14 |
Approvals | CE |
Approvals | UL CSA C-Tick UkrSEPRO |
Climatic proofing | Damp heat, constant, to IEC 60068-2-3 Damp heat, cyclic, to IEC 60068-2-10 |
Ambient temperature >Operation [ϑ] |
-5 - +40 up to 60 at 2% derating per Kelvin temperature rise °C |
Ambient temperature >Storage [ϑ] |
-25 - +60 °C |
Altitude | 0 - 1000 m, above that 1 % derating per 100 m , up to 2000 m m |
Mounting position | Vertical |
Degree of protection >Degree of Protection |
IP20 (terminals IP00) |
Degree of protection >Integrated |
Protection type IP40 can be achieved on all sides with covers from the NZM range. |
Protection against direct contact | Finger- and back-of-hand proof |
Overvoltage category/pollution degree | II/2 |
Shock resistance | 8 g/11 ms |
Vibration resistance to EN 60721-3-2 | 2M2 |
Radio interference level (IEC/EN 55011) | B |
Static heat dissipation, non-current-dependent [Pvs] | 13 W |
Weight | 1.8 kg |
Rated operating voltage [Ue] | 200 - 480 V AC |
Supply frequency [fLN] | 50/60 Hz |
Rated operational current [Ie
] >AC-53 [Ie] |
70 A |
Assigned motor rating (Standard connection, In-Line) >at 230 V, 50 Hz [P] |
15 kW |
Assigned motor rating (Standard connection, In-Line) >at 400 V, 50 Hz [P] |
37 kW |
Assigned motor rating (Standard connection, In-Line) >at 200 V, 60 Hz [P] |
20 HP |
Assigned motor rating (Standard connection, In-Line) >at 230 V, 60 Hz [P] |
25 HP |
Assigned motor rating (Standard connection, In-Line) >at 460 V, 60 Hz [P] |
50 HP |
Overload cycle to IEC/EN 60947-4-2 >AC-53a |
68 A: AC-53a: 3 - 5: 75 - 10 |
Overload cycle to IEC/EN 60947-4-2 >Internal bypass contacts |
✓ |
Short-circuit rating >Type “1” coordination |
NZMN1-M80 |
Short-circuit rating >Type „2“ coordination (additional with the fuses for coordination type „1“) |
3 x 170M4008 |
Fuse base (number x part no.) | 3 x 170H3004 |
Cable lengths >Solid |
1 x (25 - 70) 2 x (6 - 25) mm2 |
Cable lengths >Stranded |
1 x (25 - 70) 2 x (6 - 25) mm2 |
Cable lengths >Solid or stranded |
1 x (12 - 2/0) AWG |
Cable lengths >Copper band |
2 x 9 x 0.89 x 9 x 0.8 MM |
Cable lengths >Tightening torque |
6 (≤ 10 mm²); 9 (> 10 mm²) Nm |
Cable lengths >Screwdriver (PZ: Pozidriv) |
PZ2; 1 x 6 mm mm |
Control cables >Solid |
1 x (0.5 - 2.5) 2 x (0.5 - 1.0) mm2 |
Control cables >Flexible with ferrule |
1 x (0.5 - 1.5) 2 x (0.5 - 0.75) mm2 |
Control cables >Stranded |
1 x (0.5 - 1.5) 2 x (0.5 - 1.0) mm2 |
Control cables >Solid or stranded |
1 x (21 - 14) 2 x (21 - 18) AWG |
Control cables >Tightening torque |
0.4 Nm |
Control cables >Screwdriver |
0,6 x 3,5 mm |
Digital inputs >Control voltage >DC-operated |
24 V DC +10 %/- 15 % oder über SWD V DC |
Digital inputs >Current consumption 24 V >External 24 V |
1.6 mA |
Digital inputs >Pick-up voltage >DC-operated |
17.3 - 27 V DC |
Digital inputs >Drop-out voltage [x Us ] >DC operated |
0 - 3 V DC |
Digital inputs >Pick-up time >DC operated |
250 ms |
Digital inputs >Drop-out time >DC operated |
350 ms |
Regulator supply >Voltage [Us] |
24 V DC +10 %/- 15 % V |
Regulator supply >Current consumption [Ie] |
50 mA |
Regulator supply >Current consumption at peak performance (close bypass) at 24 V DC [IPeak] |
0,6/50 A/ms |
Regulator supply >Notes |
External supply voltage |
Relay outputs >Number |
2 (TOR, Ready) |
Relay outputs >Voltage range |
250 V AC |
Relay outputs >AC-11 current range |
1 A, AC-11 A |
Ramp times >Acceleration |
1 - 30 s |
Ramp times >Deceleration |
0 - 30 s |
Start voltage (= turn-off voltage) | 30100 % |
Start pedestal | 30 - 100 % |
Current limitation | (0 - 8) x Ie |
Fields of application >Fields of application |
Soft starting of three-phase asynchronous motors |
Fields of application >1-phase motors |
● |
Fields of application >3-phase motors |
✓ |
Fast switching (semiconductor contactor) | - (minimum ramp time 1s) |
Soft start function | ✓ |
Reversing starter | External solution required |
Suppression of closing transients | ✓ |
Current limitation | ●, with PKE |
Fault memory | 8 Faults |
Suppression of DC components for motors | ✓ |
Potential isolation between power and control sections | ✓ |
Communication Interfaces | SmartWire-DT |
Rated operational current for specified heat dissipation [In] | Rated impulse withstand voltage:
|
Heat dissipation per pole, current-dependent [Pvid] | 70 A |
Equipment heat dissipation, current-dependent [Pvid] | 0 W |
Static heat dissipation, non-current-dependent [Pvs] | 13 W |
Heat dissipation capacity [Pdiss] | 13 W |
Operating ambient temperature min. | 0 W |
Operating ambient temperature max. | -5 °C |
10.2 Strength of materials and parts >10.2.2 Corrosion resistance |
+40 °C |
10.2 Strength of materials and parts >10.2.3.1 Verification of thermal stability of enclosures |
Meets the product standard´s requirements. |
10.2 Strength of materials and parts >10.2.3.2 Verification of resistance of insulating materials to normal heat |
Meets the product standard´s requirements. |
10.2 Strength of materials and parts >10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects |
Meets the product standard´s requirements. |
10.2 Strength of materials and parts >10.2.4 Resistance to ultra-violet (UV) radiation |
Meets the product standard´s requirements. |
10.2 Strength of materials and parts >10.2.5 Lifting |
Meets the product standard´s requirements. |
10.2 Strength of materials and parts >10.2.6 Mechanical impact |
Does not apply, since the entire switchgear needs to be evaluated. |
10.2 Strength of materials and parts >10.2.7 Inscriptions |
Does not apply, since the entire switchgear needs to be evaluated. |
10.3 Degree of protection of ASSEMBLIES | Meets the product standard´s requirements. |
10.4 Clearances and creepage distances | Does not apply, since the entire switchgear needs to be evaluated. |
10.5 Protection against electric shock | Meets the product standard´s requirements. |
10.6 Incorporation of switching devices and components | Does not apply, since the entire switchgear needs to be evaluated. |
10.7 Internal electrical circuits and connections | Does not apply, since the entire switchgear needs to be evaluated. |
10.8 Connections for external conductors | Is the panel builder´s responsibility. |
10.9 Insulation properties >10.9.2 Power-frequency electric strength |
Is the panel builder´s responsibility. |
10.9 Insulation properties >10.9.3 Impulse withstand voltage |
Is the panel builder´s responsibility. |
10.9 Insulation properties >10.9.4 Testing of enclosures made of insulating material |
Is the panel builder´s responsibility. |
10.10 Temperature rise | Is the panel builder´s responsibility. |
10.11 Short-circuit rating | The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices. |
10.12 Electromagnetic compatibility | Is the panel builder´s responsibility. The specifications for the switchgear must be observed. |
10.13 Mechanical function | Is the panel builder´s responsibility. The specifications for the switchgear must be observed. |
Rated operation current Ie at 40 °C Tu | The device meets the requirements, provided the information in the instruction leaflet (IL) is observed. |
Rated operating voltage Ue | 70 A |
Rated power three-phase motor, inline, at 230 V | 230 - 460 V |
Rated power three-phase motor, inline, at 400 V | 15 kW |
Rated power three-phase motor, inside delta, at 230 V | 37 kW |
Rated power three-phase motor, inside delta, at 400 V | 0 kW |
Function | 0 kW |
Internal bypass | Single direction |
With display | Yes |
Torque control | No |
Rated surrounding temperature without derating | No |
Rated control supply voltage Us at AC 50HZ | 40 °C |
Rated control supply voltage Us at AC 60HZ | 0 - 0 V |
Rated control supply voltage Us at DC | 0 - 0 V |
Voltage type for actuating | 24 - 24 V |
Integrated motor overload protection | DC |
Release class | No |
Degree of protection (IP) | Other |
Degree of protection (NEMA) | IP20 |
Product Standards | 1 |
Specially designed for North America | IEC/EN 60947-4-2; GB 14048.6; UL 508; CSA-C22.2 No 0-M91; CSA-C22.2 No 14-05 CE marking |
Suitable for | No |
Current Limiting Circuit-Breaker | Branch circuits |
Max. Voltage Rating | No |
Degree of Protection | 480 V |
Mnelko olarak, endüstriyel otomasyon çözümlerinde güvenilir bir iş ortağı olarak, geniş ürün yelpazesi ile işletmenizin tüm ihtiyaçlarını karşılamaya yönelik kaliteli ve yenilikçi ürünler sunmaktayız. Ürün portföyümüz, modern endüstriyel süreçleri desteklemek amacıyla yüksek performans, dayanıklılık ve verimlilik ilkeleri doğrultusunda tasarlanmış çözümlerden oluşur.
Tüm ürünlerimiz, zorlu çalışma koşullarında dahi maksimum güvenilirlik sunar ve işletmenizin operasyonlarını sorunsuz şekilde sürdürmesine yardımcı olur. Endüstriyel otomasyon, enerji yönetimi, kablolama çözümleri ve daha birçok alanda sunduğumuz ürünler, farklı sektörlerdeki ihtiyaçlara esneklikle uyum sağlar.
Ayrıca, ürünlerimiz sadece kaliteli malzemelerle üretilmiş olup, uluslararası standartlara uygunluk göstermektedir. Müşterilerimize sunduğumuz çözümlerle, operasyonel verimliliklerini artırmalarına ve maliyetlerini optimize etmelerine olanak tanıyoruz. Teknolojik gelişmeleri yakından takip eden firmamız, sürekli olarak yenilikçi ürünler sunarak, müşterilerimizin rekabet avantajı elde etmesine destek vermektedir.
Her bir ürün sayfamızda, teknik detaylar, kullanım alanları ve ürün özelliklerine dair kapsamlı bilgilere ulaşabilirsiniz. Endüstriyel süreçlerinizi güçlendirmek için ihtiyacınız olan tüm ürünleri sitemizden keşfedebilir, sorunsuz bir satın alma deneyimi yaşayabilirsiniz.