Yumuşak yolverici, 100 A, 200 - 480 V AC, 24 V AC/DC, Çerçeve boyutu FS3, Ortam sıcaklığı Çalışma -40 - +40 °C Yumuşak yol verici, Açıklama: Dahili bypass kontaklı, Fonksiyon: Üç fazlı yükler için yumuşak yol vericiler, Şebeke besleme gerilimi (50/60 Hz): ULN= 200 - 480 V AC, Besleme gerilimi: Us= 24 V AC/DC, Kontrol gerilim: UC= 24 V AC, 24 V DC, 400 V, 50 Hz'de atanan motor gücü (Standart bağlantı, Hat içi): P= 55 kW, 460 V, 60 Hz'de: P= 75 HP, Nominal çalışma akımı AC-53: Ie= 100 A, Nominal çalışma gerilimi: Ue= 200 V, 230 V, 400 V, 480 V, SmartWire-DT'ye bağlantı: hayır, Çerçeve boyutu: FS3, Standartlar: IEC/EN 60947-4-2 UL 508, CSA22.2-14
Yumuşak yolverici, 100 A, 200 - 480 V AC, 24 V AC/DC, Çerçeve boyutu FS3, Ortam sıcaklığı Çalışma -40 - +40 °C
Yumuşak yol verici, Açıklama: Dahili bypass kontaklı, Fonksiyon: Üç fazlı yükler için yumuşak yol vericiler, Şebeke besleme gerilimi (50/60 Hz): ULN= 200 - 480 V AC, Besleme gerilimi: Us= 24 V AC/DC, Kontrol gerilim: UC= 24 V AC, 24 V DC, 400 V, 50 Hz'de atanan motor gücü (Standart bağlantı, Hat içi): P= 55 kW, 460 V, 60 Hz'de: P= 75 HP, Nominal çalışma akımı AC-53: Ie= 100 A, Nominal çalışma gerilimi: Ue= 200 V, 230 V, 400 V, 480 V, SmartWire-DT'ye bağlantı: hayır, Çerçeve boyutu: FS3, Standartlar: IEC/EN 60947-4-2 UL 508, CSA22.2-14
| Description | With internal bypass contacts |
| Function | Soft starters for three-phase loads |
| Mains supply voltage (50/60 Hz) [ULN] | 200 - 480 V AC |
| Supply voltage [Us] | 24 V AC/DC |
| Control voltage [UC] | 24 V AC 24 V DC |
| at 400 V, 50 Hz [P] | |
| at 460 V, 60 Hz [P] | 55 kW |
| AC-53 [Ie] | 75 HP |
| Rated operational voltage [Ue] | |
| Connection to SmartWire-DT | 100 A |
| Frame size | 200 V 230 V 400 V 480 V |
| Standards | no |
| Approvals | FS3 |
| Approvals | |
| Climatic proofing | IEC/EN 60947-4-2 UL 508 CSA22.2-14 |
| Ambient temperature >Operation [ϑ] |
CE |
| Ambient temperature >Storage [ϑ] |
UL CSA C-Tick UkrSEPRO |
| Altitude | Damp heat, constant, to IEC 60068-2-3 Damp heat, cyclic, to IEC 60068-2-10 Cold to EN 60068-2-1 |
| Mounting position | -40 - +40 up to 60 at 2% derating per Kelvin temperature rise °C |
| Degree of protection >Degree of Protection |
-40 - +60 °C |
| Degree of protection >Integrated |
0 - 1000 m, above that 1 % derating per 100 m , up to 2000 m m |
| Protection against direct contact | Vertical |
| Overvoltage category/pollution degree | IP20 (terminals IP00) |
| Shock resistance | Protection type IP40 can be achieved on all sides with covers from the NZM range. |
| Vibration resistance to EN 60721-3-2 | Finger- and back-of-hand proof |
| Radio interference level (IEC/EN 55011) | II/2 |
| Static heat dissipation, non-current-dependent [Pvs] | 8 g/11 ms |
| Weight | 2M2 |
| Rated operating voltage [Ue] | B |
| Supply frequency [fLN] | 25 W |
| Rated operational current [Ie
] >AC-53 [Ie] |
1.8 kg |
| Assigned motor rating (Standard connection, In-Line) >at 230 V, 50 Hz [P] |
|
| Assigned motor rating (Standard connection, In-Line) >at 400 V, 50 Hz [P] |
200 - 480 V AC |
| Assigned motor rating (Standard connection, In-Line) >at 200 V, 60 Hz [P] |
50/60 Hz |
| Assigned motor rating (Standard connection, In-Line) >at 230 V, 60 Hz [P] |
100 A |
| Assigned motor rating (Standard connection, In-Line) >at 460 V, 60 Hz [P] |
30 kW |
| Overload cycle to IEC/EN 60947-4-2 >AC-53a |
55 kW |
| Overload cycle to IEC/EN 60947-4-2 >Internal bypass contacts |
30 HP |
| Short-circuit rating >Type “1” coordination |
30 HP |
| Short-circuit rating >Type „2“ coordination (additional with the fuses for coordination type „1“) |
75 HP |
| Fuse base (number x part no.) | 99 A: AC-53a: 3 - 5: 75 - 10 |
| Cable lengths >Solid |
✓ |
| Cable lengths >Stranded |
NZMN1-M100 |
| Cable lengths >Solid or stranded |
3 x 170M4008 |
| Cable lengths >Copper band |
3 x 170H3004 |
| Cable lengths >Tightening torque |
|
| Cable lengths >Screwdriver (PZ: Pozidriv) |
1 x (25 - 70) 2 x (6 - 25) mm2 |
| Control cables >Solid |
1 x (25 - 70) 2 x (6 - 25) mm2 |
| Control cables >Flexible with ferrule |
1 x (12 - 2/0) AWG |
| Control cables >Stranded |
2 x 9 x 0.89 x 9 x 0.8 MM |
| Control cables >Solid or stranded |
6 (≤ 10 mm²); 9 (> 10 mm²) Nm |
| Control cables >Tightening torque |
PZ2; 1 x 6 mm mm |
| Control cables >Screwdriver |
1 x (0.5 - 2.5) 2 x (0.5 - 1.0) mm2 |
| Digital inputs >Control voltage >DC-operated |
1 x (0.5 - 1.5) 2 x (0.5 - 0.75) mm2 |
| Digital inputs >Current consumption 24 V >External 24 V |
1 x (0.5 - 1.5) 2 x (0.5 - 1.0) mm2 |
| Digital inputs >Pick-up voltage >DC-operated |
1 x (21 - 14) 2 x (21 - 18) AWG |
| Digital inputs >Pick-up voltage >AC operated |
0.4 Nm |
| Digital inputs >Drop-out voltage [x Us ] >DC operated |
0,6 x 3,5 mm |
| Digital inputs >Drop-out voltage [x Us ] >AC operated |
|
| Digital inputs >Pick-up time >DC operated |
24 V DC +10 %/- 15 % V DC |
| Digital inputs >Pick-up time >AC operated |
1.6 mA |
| Digital inputs >Drop-out time >DC operated |
17.3 - 27 V DC |
| Regulator supply >Voltage [Us] |
17.3 - 27 V AC |
| Regulator supply >Current consumption [Ie] |
0 - 3 V DC |
| Regulator supply >Current consumption at peak performance (close bypass) at 24 V DC [IPeak] |
0 - 3 V AC |
| Regulator supply >Notes |
250 ms |
| Relay outputs >Number |
250 ms |
| Relay outputs >Voltage range |
350 ms |
| Relay outputs >AC-11 current range |
24 V AC/DC +10 %/- 15 % V |
| Ramp times >Acceleration >Ramp time, max. |
50 mA |
| Ramp times >Deceleration |
0,6/50 A/ms |
| Start voltage (= turn-off voltage) | External supply voltage |
| Start pedestal | 2 (TOR, Ready) |
| Fields of application >Fields of application |
250 V AC |
| Fields of application >1-phase motors |
1 A, AC-11 A |
| Fields of application >3-phase motors |
|
| Fast switching (semiconductor contactor) | 30 s |
| Soft start function | 0 - 30 s |
| Reversing starter | 30100 % |
| Suppression of closing transients | 30 - 100 % |
| Suppression of DC components for motors | Soft starting of three-phase asynchronous motors |
| Potential isolation between power and control sections | ● |
| Rated operational current for specified heat dissipation [In] | ✓ |
| Heat dissipation per pole, current-dependent [Pvid] | |
| Equipment heat dissipation, current-dependent [Pvid] | - (minimum ramp time 1s) |
| Static heat dissipation, non-current-dependent [Pvs] | ✓ |
| Heat dissipation capacity [Pdiss] | External solution required |
| Operating ambient temperature min. | ✓ |
| Operating ambient temperature max. | ✓ |
| 10.2 Strength of materials and parts >10.2.2 Corrosion resistance |
✓ |
| 10.2 Strength of materials and parts >10.2.3.1 Verification of thermal stability of enclosures |
|
| 10.2 Strength of materials and parts >10.2.3.2 Verification of resistance of insulating materials to normal heat |
100 A |
| 10.2 Strength of materials and parts >10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects |
0 W |
| 10.2 Strength of materials and parts >10.2.4 Resistance to ultra-violet (UV) radiation |
25 W |
| 10.2 Strength of materials and parts >10.2.5 Lifting |
25 W |
| 10.2 Strength of materials and parts >10.2.6 Mechanical impact |
0 W |
| 10.2 Strength of materials and parts >10.2.7 Inscriptions |
-40 °C |
| 10.3 Degree of protection of ASSEMBLIES | +40 °C |
| 10.4 Clearances and creepage distances | |
| 10.5 Protection against electric shock | Meets the product standard´s requirements. |
| 10.6 Incorporation of switching devices and components | Meets the product standard´s requirements. |
| 10.7 Internal electrical circuits and connections | Meets the product standard´s requirements. |
| 10.8 Connections for external conductors | Meets the product standard´s requirements. |
| 10.9 Insulation properties >10.9.2 Power-frequency electric strength |
Meets the product standard´s requirements. |
| 10.9 Insulation properties >10.9.3 Impulse withstand voltage |
Does not apply, since the entire switchgear needs to be evaluated. |
| 10.9 Insulation properties >10.9.4 Testing of enclosures made of insulating material |
Does not apply, since the entire switchgear needs to be evaluated. |
| 10.10 Temperature rise | Meets the product standard´s requirements. |
| 10.11 Short-circuit rating | Does not apply, since the entire switchgear needs to be evaluated. |
| 10.12 Electromagnetic compatibility | Meets the product standard´s requirements. |
| 10.13 Mechanical function | Does not apply, since the entire switchgear needs to be evaluated. |
| Rated operation current Ie at 40 °C Tu | Does not apply, since the entire switchgear needs to be evaluated. |
| Rated operating voltage Ue | Is the panel builder´s responsibility. |
| Rated power three-phase motor, inline, at 230 V | Is the panel builder´s responsibility. |
| Rated power three-phase motor, inline, at 400 V | Is the panel builder´s responsibility. |
| Rated power three-phase motor, inside delta, at 230 V | Is the panel builder´s responsibility. |
| Rated power three-phase motor, inside delta, at 400 V | Is the panel builder´s responsibility. |
| Function | The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices. |
| Internal bypass | Is the panel builder´s responsibility. The specifications for the switchgear must be observed. |
| With display | Is the panel builder´s responsibility. The specifications for the switchgear must be observed. |
| Torque control | The device meets the requirements, provided the information in the instruction leaflet (IL) is observed. |
| Rated surrounding temperature without derating | |
| Rated control supply voltage Us at AC 50HZ | |
| Rated control supply voltage Us at AC 60HZ | 100 A |
| Rated control supply voltage Us at DC | 230 - 460 V |
| Voltage type for actuating | 30 kW |
| Integrated motor overload protection | 55 kW |
| Release class | 0 kW |
| Degree of protection (IP) | 0 kW |
| Degree of protection (NEMA) | Single direction |
| Product Standards | Yes |
| UL File No. | No |
| CSA File No. | No |
| CSA Class No. | 40 °C |
| Suitable for | 24 - 24 V |
| Max. Voltage Rating | 24 - 24 V |
| Degree of Protection | 24 - 24 V |
Mnelko olarak, endüstriyel otomasyon çözümlerinde güvenilir bir iş ortağı olarak, geniş ürün yelpazesi ile işletmenizin tüm ihtiyaçlarını karşılamaya yönelik kaliteli ve yenilikçi ürünler sunmaktayız. Ürün portföyümüz, modern endüstriyel süreçleri desteklemek amacıyla yüksek performans, dayanıklılık ve verimlilik ilkeleri doğrultusunda tasarlanmış çözümlerden oluşur.
Tüm ürünlerimiz, zorlu çalışma koşullarında dahi maksimum güvenilirlik sunar ve işletmenizin operasyonlarını sorunsuz şekilde sürdürmesine yardımcı olur. Endüstriyel otomasyon, enerji yönetimi, kablolama çözümleri ve daha birçok alanda sunduğumuz ürünler, farklı sektörlerdeki ihtiyaçlara esneklikle uyum sağlar.
Ayrıca, ürünlerimiz sadece kaliteli malzemelerle üretilmiş olup, uluslararası standartlara uygunluk göstermektedir. Müşterilerimize sunduğumuz çözümlerle, operasyonel verimliliklerini artırmalarına ve maliyetlerini optimize etmelerine olanak tanıyoruz. Teknolojik gelişmeleri yakından takip eden firmamız, sürekli olarak yenilikçi ürünler sunarak, müşterilerimizin rekabet avantajı elde etmesine destek vermektedir.
Her bir ürün sayfamızda, teknik detaylar, kullanım alanları ve ürün özelliklerine dair kapsamlı bilgilere ulaşabilirsiniz. Endüstriyel süreçlerinizi güçlendirmek için ihtiyacınız olan tüm ürünleri sitemizden keşfedebilir, sorunsuz bir satın alma deneyimi yaşayabilirsiniz.
Tüm hakları saklıdır. Mnelko Endüstriyel San. ve Tic.Ltd.Şti. 2024
