DILP250/22(220-230V50HZ)
207457 DILP250/22(220-230V50HZ)
207457

Kontaktör, 4 kutuplu, 250 A, 2 N/O, 2 NC, 220 V 50 Hz, 230 V 50 Hz, AC çalışma, Vidalı terminaller
Kontaktör, Uygulama: 4 kutuplu elektrik tüketicileri için kontaktörler, 200 A'dan büyük kontaktörler, 4 kutuplu, Kullanım kategorisi: AC-1: Endüktif olmayan veya hafif endüktif yükler, direnç fırınları, Bağlantı tekniği: Vidalı terminaller, Kutup sayısı: 4 kutup , Nominal çalışma akımı AC-1 Konvansiyonel serbest hava termal akımı, 3 kutuplu, 50 - 60 Hz 40 °C'de açık: Ith =Ie= 250 A, Nominal çalışma akımı AC-1 Konvansiyonel serbest hava termal akımı, 1 kutup açık: Ith = 700 A, Nominal çalışma akımı AC-1 220 V 230 V: P= 45 kW, 380 V 400 V: P= 75 kW, 660 V 690 V: P= 110 kW, Kontaklar N/O = Normalde açık: 2 N /O, Kontaklar N/C = Normalde kapalı: 2 NC, Gerilim AC/DC: AC çalışması

Product range	Contactors
Application	Contactors for 4 pole electric consumers
Subrange	Contactors larger than 200 A, 4 pole
Utilization category	AC-1: Non-inductive or slightly inductive loads, resistance furnaces
Connection technique	Screw terminals
Number of poles	4 pole
AC-1 >Conventional free air thermal current, 3 pole, 50 - 60 Hz >Open >at 40 °C [Ith =Ie]
AC-1 >Conventional free air thermal current, 3 pole, 50 - 60 Hz >Open >at 55 °C [Ith =Ie]	250 A
AC-1 >Conventional free air thermal current, 3 pole, 50 - 60 Hz >Open >at 60 °C [Ith =Ie]	230 A
AC-1 >Conventional free air thermal current, 1 pole >open [Ith ]	200 A
N/O = Normally open	700 A
N/C = Normally closed
Contact sequence	2 N/O
For use with	2 NC
Actuating voltage
Voltage AC/DC	DILP800-XHI…
Standards	220 V 50 Hz 230 V 50 Hz
Lifespan, mechanical >AC operated [Operations]	AC operation
Operating frequency, mechanical >AC operated [Operations/h]
Climatic proofing	IEC/EN 60947, VDE 0660
Ambient temperature >Open	10 x 106
Mounting position >Mounting position	3600
Mechanical shock resistance (IEC/EN 60068-2-27) >Half-sinusoidal shock, 15 ms >Main contacts >N/O contact	Damp heat, cyclic, to IEC 60068-2-30
Degree of Protection	-40 - +70 °C
Protection against direct contact when actuated from front (EN 50274)
Terminal capacity main cable >Solid	10 g
Terminal capacity main cable >Stranded	IP00
Terminal capacity control circuit cables >Solid	Finger and back-of-hand proof with terminal shroud
Main cable connection screw/bolt	35 - 120 mm2
Tightening torque	35 - 120 mm2
Control circuit cable connection screw/bolt	2 x (0.5 - 2.5) mm2
Tightening torque	M10
Tool >Control circuit cables >Pozidriv screwdriver	12 - 16 Nm
Rated impulse withstand voltage [Uimp]	M3.5
Overvoltage category/pollution degree	1.2 Nm
Rated insulation voltage [Ui]	2 Size
Rated operational voltage [Ue]
Safe isolation to EN 61140 >between coil and contacts	8000 V AC
Safe isolation to EN 61140 >between the contacts	III/3
Making capacity (cos ϕ) [Up to 690 V]	1000 V AC
Breaking capacity >220 V 230 V	1000 V AC
Breaking capacity >380 V 400 V	1000 V AC
Breaking capacity >500 V	690 V AC
Breaking capacity >660 V 690 V	1800 According to IEC/EN 60947 A
Short-circuit rating >Short-circuit protection maximum fuse >Type “2” coordination >400 V [gG/gL 500 V]	1500 A
Short-circuit rating >Short-circuit protection maximum fuse >Type “1” coordination >400 V [gG/gL 500 V]	1500 A
AC-1 >Rated operational current >Conventional free air thermal current, 3 pole, 50 - 60 Hz >Open >at 40 °C [Ith =Ie]	1200 A
AC-1 >Rated operational current >Conventional free air thermal current, 3 pole, 50 - 60 Hz >Open >at 55 °C [Ith =Ie]	1200 A
AC-1 >Rated operational current >Conventional free air thermal current, 3 pole, 50 - 60 Hz >Open >at 60 °C [Ith =Ie]	200 A
AC-1 >Rated operational current >Conventional free air thermal current, 1 pole >open [Ith ]	250 A
AC-3 >Rated operational current >Open, 3-pole: 50 – 60 Hz >220 V 230 V [Ie]
AC-3 >Rated operational current >Open, 3-pole: 50 – 60 Hz >240 V [Ie]	250 A
AC-3 >Rated operational current >Open, 3-pole: 50 – 60 Hz >415 V [Ie]	230 A
AC-3 >Rated operational current >Open, 3-pole: 50 – 60 Hz >440V [Ie]	200 A
AC-3 >Rated operational current >Open, 3-pole: 50 – 60 Hz >500 V [Ie]	700 A
AC-3 >Rated operational current >Open, 3-pole: 50 – 60 Hz >660 V 690 V [Ie]	145 A
AC-3 >Rated operational current >Open, 3-pole: 50 – 60 Hz >1000 V [Ie ]	145 A
AC-3 >Motor rating [P] >220 V 230 V [P]	145 A
AC-3 >Motor rating [P] >240V [P]	145 A
AC-3 >Motor rating [P] >380 V 400 V [P]	120 A
AC-3 >Motor rating [P] >415 V [P]	120 A
AC-3 >Motor rating [P] >440 V [P]	80 A
AC-3 >Motor rating [P] >660 V 690 V [P]	45 kW
AC-3 >Motor rating [P] >1000 V [P]	45 kW
Rated operational current, open >DC-1 >60 V [Ie ]	75 kW
Rated operational current, open >DC-1 >110 V [Ie ]	75 kW
Rated operational current, open >DC-1 >220 V [Ie ]	75 kW
Rated operational current, open >DC-1 >440 V [Ie ]	110 kW
Rated operational current, open >DC-3 >60 V [Ie ]	110 kW
Rated operational current, open >DC-3 >110 V [Ie ]
Rated operational current, open >DC-3 >220 V [Ie ]	200 A
Rated operational current, open >DC-3 >440 V [Ie ]	200 A
Rated operational current, open >DC-5 >60 V [Ie ]	200 A
Rated operational current, open >DC-5 >110 V [Ie ]	200 A
Rated operational current, open >DC-5 >220 V [Ie ]	145 A
Rated operational current, open >DC-5 >440 V [Ie ]	135 A
4 pole, at Ith	135 A
Voltage tolerance >AC operated 50 Hz [Pick-up]	135 A
Power consumption of the coil in a cold state and 1.0 x US >AC operated 50/60 Hz [Pick-up]	135 A
Power consumption of the coil in a cold state and 1.0 x US >AC operated 50/60 Hz [Sealing]	135 A
Power consumption of the coil in a cold state and 1.0 x US >AC operated 50/60 Hz [Sealing]	135 A
Duty factor	135 A
Changeover time at 100 % US (recommended value) >Main contacts >AC operated >Closing delay
Changeover time at 100 % US (recommended value) >Main contacts >AC operated >Opening delay	52 W
Rated operational current for specified heat dissipation [In]
Heat dissipation per pole, current-dependent [Pvid]	0.85 - 1.1 x Uc
Equipment heat dissipation, current-dependent [Pvid]	800 VA
Static heat dissipation, non-current-dependent [Pvs]	52 VA
Heat dissipation capacity [Pdiss]	18 W
Operating ambient temperature min.	100 % DF
Operating ambient temperature max.	20 - 40 ms
10.2 Strength of materials and parts >10.2.2 Corrosion resistance	7 - 15 ms
10.2 Strength of materials and parts >10.2.3.1 Verification of thermal stability of enclosures
10.2 Strength of materials and parts >10.2.3.2 Verification of resistance of insulating materials to normal heat	250 A
10.2 Strength of materials and parts >10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects	13 W
10.2 Strength of materials and parts >10.2.4 Resistance to ultra-violet (UV) radiation	0 W
10.2 Strength of materials and parts >10.2.5 Lifting	18 W
10.2 Strength of materials and parts >10.2.6 Mechanical impact	0 W
10.2 Strength of materials and parts >10.2.7 Inscriptions	-40 °C
10.3 Degree of protection of ASSEMBLIES	+70 °C
10.4 Clearances and creepage distances
10.5 Protection against electric shock	Meets the product standard´s requirements.
10.6 Incorporation of switching devices and components	Meets the product standard´s requirements.
10.7 Internal electrical circuits and connections	Meets the product standard´s requirements.
10.8 Connections for external conductors	Meets the product standard´s requirements.
10.9 Insulation properties >10.9.2 Power-frequency electric strength	Meets the product standard´s requirements.
10.9 Insulation properties >10.9.3 Impulse withstand voltage	Does not apply, since the entire switchgear needs to be evaluated.
10.9 Insulation properties >10.9.4 Testing of enclosures made of insulating material	Does not apply, since the entire switchgear needs to be evaluated.
10.10 Temperature rise	Meets the product standard´s requirements.
10.11 Short-circuit rating	Does not apply, since the entire switchgear needs to be evaluated.
10.12 Electromagnetic compatibility	Meets the product standard´s requirements.
10.13 Mechanical function	Does not apply, since the entire switchgear needs to be evaluated.
Rated control supply voltage Us at AC 50HZ	Does not apply, since the entire switchgear needs to be evaluated.
Rated control supply voltage Us at AC 60HZ	Is the panel builder´s responsibility.
Rated control supply voltage Us at DC	Is the panel builder´s responsibility.
Voltage type for actuating	Is the panel builder´s responsibility.
Rated operation current Ie at AC-1, 400 V	Is the panel builder´s responsibility.
Rated operation current Ie at AC-3, 400 V	Is the panel builder´s responsibility.
Rated operation power at AC-3, 400 V	The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
Rated operation current Ie at AC-4, 400 V	Is the panel builder´s responsibility. The specifications for the switchgear must be observed.
Rated operation power at AC-4, 400 V	Is the panel builder´s responsibility. The specifications for the switchgear must be observed.
Rated operation power NEMA	The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
Modular version
Number of auxiliary contacts as normally open contact
Number of auxiliary contacts as normally closed contact	220 - 230 V
Type of electrical connection of main circuit	0 - 0 V
Number of normally closed contacts as main contact	0 - 0 V
Number of main contacts as normally open contact	AC
Product Standards	250 A
UL File No.	145 A
UL Category Control No.	75 kW
CSA File No.	0 A
North America Certification	0 kW
Specially designed for North America	0 kW
Characteristic curve	No

Mnelko olarak, endüstriyel otomasyon çözümlerinde güvenilir bir iş ortağı olarak, geniş ürün yelpazesi ile işletmenizin tüm ihtiyaçlarını karşılamaya yönelik kaliteli ve yenilikçi ürünler sunmaktayız. Ürün portföyümüz, modern endüstriyel süreçleri desteklemek amacıyla yüksek performans, dayanıklılık ve verimlilik ilkeleri doğrultusunda tasarlanmış çözümlerden oluşur.
Tüm ürünlerimiz, zorlu çalışma koşullarında dahi maksimum güvenilirlik sunar ve işletmenizin operasyonlarını sorunsuz şekilde sürdürmesine yardımcı olur. Endüstriyel otomasyon, enerji yönetimi, kablolama çözümleri ve daha birçok alanda sunduğumuz ürünler, farklı sektörlerdeki ihtiyaçlara esneklikle uyum sağlar.
Ayrıca, ürünlerimiz sadece kaliteli malzemelerle üretilmiş olup, uluslararası standartlara uygunluk göstermektedir. Müşterilerimize sunduğumuz çözümlerle, operasyonel verimliliklerini artırmalarına ve maliyetlerini optimize etmelerine olanak tanıyoruz. Teknolojik gelişmeleri yakından takip eden firmamız, sürekli olarak yenilikçi ürünler sunarak, müşterilerimizin rekabet avantajı elde etmesine destek vermektedir.
Her bir ürün sayfamızda, teknik detaylar, kullanım alanları ve ürün özelliklerine dair kapsamlı bilgilere ulaşabilirsiniz. Endüstriyel süreçlerinizi güçlendirmek için ihtiyacınız olan tüm ürünleri sitemizden keşfedebilir, sorunsuz bir satın alma deneyimi yaşayabilirsiniz.