DILMP20(220V50/60HZ)
276977 DILMP20(220V50/60HZ)
276977

Kontaktör, 4 kutuplu, AC çalışma, AC-1: 22 A, 220 V 50/60 Hz, Vidalı terminaller
Kontaktör, Uygulama: 4 kutuplu elektrik tüketicileri için kontaktörler, 200 A'ya kadar kontaktörler, 4 kutuplu, Kullanım kategorisi: AC-1: Endüktif olmayan veya hafif endüktif yükler, dirençli fırınlar, NAC-3: Normal AC endüksiyon motorları: başlatma, anahtarlama çalışma sırasında kapalı, Bağlantı tekniği: Vidalı terminaller, Kutup sayısı: 4 kutuplu, 380 V 400 V: Ie= 12 A, Konvansiyonel serbest hava termal akımı, 3 kutuplu, 50 - 60 Hz 40 °C'de açık: Ith =Ie= 22 A, kapalı: Ith= 18 A, Konvansiyonel serbest hava termal akımı, 1 kutup açık: Ith= 60 A, kapalı: Ith= 54 A, 220 V 230 V: P= 3,5 kW, 380 V 400 V: P= 5,5 kW, 660 V 690 V: P= 6,5 kW, Talimatlar: EN 50 012'ye göre kontaklar, Gerilim AC/DC: AC çalışması

Product range	Contactors
Application	Contactors for 4 pole electric consumers
Subrange	Contactors up to 200 A, 4 pole
Utilization category	AC-1: Non-inductive or slightly inductive loads, resistance furnaces NAC-3: Normal AC induction motors: starting, switch off during running
Connection technique	Screw terminals
Number of poles	4 pole
AC-1 >Conventional free air thermal current, 3 pole, 50 - 60 Hz >at 40 °C [Ith =Ie]
AC-1 >Conventional free air thermal current, 3 pole, 50 - 60 Hz >at 50 °C [Ith =Ie]	22 A
AC-1 >Conventional free air thermal current, 3 pole, 50 - 60 Hz >at 55 °C [Ith =Ie]	21 A
AC-1 >Conventional free air thermal current, 3 pole, 50 - 60 Hz >at 60 °C [Ith =Ie]	20.5 A
Contact sequence	20 A
For use with
Actuating voltage	DILM32-XHI(C)… DILA-XHI(V)(C)…
Voltage AC/DC	220 V 50/60 Hz
Connection to SmartWire-DT	AC operation
Instructions	no
Standards	Contacts to EN 50 012.
Lifespan, mechanical >AC operated [Operations]
Lifespan, mechanical >DC operated [Operations]	IEC/EN 60947, VDE 0660, UL, CSA
Operating frequency, mechanical >AC operated [Operations/h]	10 x 106
Operating frequency, mechanical >DC operated [Operations/h]	10 x 106
Climatic proofing	5000
Ambient temperature >Open	5000
Ambient temperature >Enclosed	Damp heat, constant, to IEC 60068-2-3 Damp heat, cyclic, to IEC 60068-2-30
Ambient temperature >Storage	-25 - +60 °C
Mounting position >Mounting position	- 25 - 40 °C
Mechanical shock resistance (IEC/EN 60068-2-27) >Half-sinusoidal shock, 10 ms >Main contacts >N/O contact	- 40 - 80 °C
Mechanical shock resistance (IEC/EN 60068-2-27) >Half-sinusoidal shock, 10 ms >Auxiliary contacts >N/O contact
Mechanical shock resistance (IEC/EN 60068-2-27) >Half-sinusoidal shock, 10 ms >Auxiliary contacts >N/C contact	10 g
Degree of Protection	7 g
Altitude	5 g
Protection against direct contact when actuated from front (EN 50274)	IP20
Stripping length	Max. 2000 m
Terminal capacity main cable >Solid	Finger and back-of-hand proof
Terminal capacity main cable >Flexible with ferrule	10 mm
Terminal capacity main cable >Solid or stranded	1 x (0.75 - 4) 2 x (0.75 - 2.5) mm2
Terminal capacity main cable >Terminal screw	1 x (0.75 - 2.5) 2 x (0.75 - 2.5) mm2
Terminal capacity main cable >Tightening torque	18 - 14 AWG
Terminal capacity main cable >Stripping length	M3.5
Terminal capacity main cable >Push-in terminals >Solid	1.2 Nm
Terminal capacity main cable >Push-in terminals >flexible	10 mm
Terminal capacity main cable >Push-in terminals >flexible with ferrules	1 x (0.75 - 2.5) 2 x (0.75 - 2.5) mm2
Terminal capacity main cable >Push-in terminals >Solid or stranded	1 x (0.75 - 2.5) 2 x (0.75 - 2.5) mm2
Terminal capacity control circuit cables >Solid	1 x (0.75 - 1.5) 2 x (0.75 - 1.5) mm2
Terminal capacity control circuit cables >Flexible with ferrule	18 - 14 AWG
Terminal capacity control circuit cables >Solid or stranded	1 x (0.75 - 4) 2 x (0.75 - 2.5) mm2
Terminal capacity control circuit cables >Stripping length	1 x (0.75 - 2.5) 2 x (0.75 - 2.5) mm2
Terminal capacity control circuit cables >Terminal screw	18 - 14 AWG
Terminal capacity control circuit cables >Tightening torque	10 mm
Terminal capacity control circuit cables >Push-in terminals >Solid	M3.5
Terminal capacity control circuit cables >Push-in terminals >Flexible	1.2 Nm
Terminal capacity control circuit cables >Push-in terminals >Flexible with ferrule	1 x (0.75 - 2.5) 2 x (0.75 - 2.5) mm2
Terminal capacity control circuit cables >Push-in terminals >Solid or stranded	1 x (0.75 - 2.5) 2 x (0.75 - 2.5) mm2
Tool >Main cable >Pozidriv screwdriver	1 x (0.75 - 1.5) 2 x (0.75 - 1.5) mm2
Tool >Main cable >Standard screwdriver	18 - 14 AWG
Tool >Control circuit cables >Pozidriv screwdriver	2 Size
Tool >Control circuit cables >Standard screwdriver	0.8 x 5.5 1 x 6 mm
Rated impulse withstand voltage [Uimp]	2 Size
Overvoltage category/pollution degree	0.8 x 5.5 1 x 6 mm
Rated insulation voltage [Ui]
Rated operational voltage [Ue]	8000 V AC
Safe isolation to EN 61140 >between coil and contacts	III/3
Safe isolation to EN 61140 >between the contacts	690 V AC
Making capacity (cos ϕ) [Up to 690 V]	690 V AC
Breaking capacity >220 V 230 V	400 V AC
Breaking capacity >380 V 400 V	400 V AC
Breaking capacity >500 V	144 According to IEC/EN 60947 A
Breaking capacity >660 V 690 V	120 A
Short-circuit rating >Short-circuit protection maximum fuse >Type “2” coordination >400 V [gG/gL 500 V]	120 A
Short-circuit rating >Short-circuit protection maximum fuse >Type “2” coordination >690 V [gG/gL 690 V]	100 A
Short-circuit rating >Short-circuit protection maximum fuse >Type “1” coordination >400 V [gG/gL 500 V]	70 A
Short-circuit rating >Short-circuit protection maximum fuse >Type “1” coordination >690 V [gG/gL 690 V]	20 A
AC-1 >Rated operational current >Conventional free air thermal current, 3 pole, 50 - 60 Hz >Open >at 40 °C [Ith =Ie]	20 A
AC-1 >Rated operational current >Conventional free air thermal current, 3 pole, 50 - 60 Hz >Open >at 50 °C [Ith =Ie]	35 A
AC-1 >Rated operational current >Conventional free air thermal current, 3 pole, 50 - 60 Hz >Open >at 55 °C [Ith =Ie]	25 A
AC-1 >Rated operational current >Conventional free air thermal current, 3 pole, 50 - 60 Hz >Open >at 60 °C [Ith =Ie]
AC-1 >Rated operational current >Conventional free air thermal current, 3 pole, 50 - 60 Hz >enclosed [Ith ]	22 A
AC-1 >Rated operational current >Conventional free air thermal current, 1 pole >open [Ith ]	21 A
AC-1 >Rated operational current >Conventional free air thermal current, 1 pole >enclosed [Ith ]	20.5 A
AC-1 >Motor rating [P] >220/230 V [P]	20 A
AC-1 >Motor rating [P] >240 V [P]	18 A
AC-1 >Motor rating [P] >380/400 V [P]	60 A
AC-1 >Motor rating [P] >415 V [P]	54 A
AC-1 >Motor rating [P] > 440 V [P]	8 kW
AC-1 >Motor rating [P] >500 V [P]	9 kW
AC-1 >Motor rating [P] >690 V [P]	14 kW
AC-3 >Rated operational current >Open, 3-pole: 50 – 60 Hz >Notes	15 kW
AC-3 >Rated operational current >Open, 3-pole: 50 – 60 Hz >220 V 230 V [Ie]	16 kW
AC-3 >Rated operational current >Open, 3-pole: 50 – 60 Hz >240 V [Ie]	18 kW
AC-3 >Rated operational current >Open, 3-pole: 50 – 60 Hz >380 V 400 V [Ie]	24 kW
AC-3 >Rated operational current >Open, 3-pole: 50 – 60 Hz >415 V [Ie]	At maximum permissible ambient temperature (open.)
AC-3 >Rated operational current >Open, 3-pole: 50 – 60 Hz >440V [Ie]	12 A
AC-3 >Rated operational current >Open, 3-pole: 50 – 60 Hz >500 V [Ie]	12 A
AC-3 >Rated operational current >Open, 3-pole: 50 – 60 Hz >660 V 690 V [Ie]	12 A
AC-3 >Motor rating [P] >220 V 230 V [P]	12 A
AC-3 >Motor rating [P] >240V [P]	12 A
AC-3 >Motor rating [P] >380 V 400 V [P]	10 A
AC-3 >Motor rating [P] >415 V [P]	7 A
AC-3 >Motor rating [P] >440 V [P]	3.5 kW
AC-3 >Motor rating [P] >500 V [P]	4 kW
AC-3 >Motor rating [P] >660 V 690 V [P]	5.5 kW
Rated operational current, open >DC-1 >60 V [Ie ]	7 kW
Rated operational current, open >DC-1 >110 V [Ie ]	7.5 kW
Rated operational current, open >DC-1 >220 V [Ie ]	7 kW
3 pole, at Ith (60°)	6.5 kW
Impedance per pole
Voltage tolerance >AC operated 50 Hz [Pick-up]	22 A
Voltage tolerance >AC operated 50/60 Hz	22 A
Voltage tolerance >Drop-out voltage AC operated [Drop-out]	6 A
Power consumption of the coil in a cold state and 1.0 x US >AC operated 50/60 Hz [Pick-up]
Power consumption of the coil in a cold state and 1.0 x US >AC operated 50/60 Hz [Pick-up]	3 W
Power consumption of the coil in a cold state and 1.0 x US >AC operated 50/60 Hz [Sealing]	2.5 mΩ
Power consumption of the coil in a cold state and 1.0 x US >AC operated 50/60 Hz [Sealing]
Duty factor	0.8 - 1.1 x Uc
Changeover time at 100 % US (recommended value) >Main contacts >AC operated >Closing delay	0.8 - 1.1 x Uc
Changeover time at 100 % US (recommended value) >Main contacts >AC operated >Opening delay	0.4 - 0.6 x Uc
Changeover time at 100 % US (recommended value) >Permissible residual current with actuation of A1 - A2 by the electronics (with 0 signal).	24 VA
Switching capacity >General use	19 W
Short Circuit Current Rating >Basic Rating >SCCR	4 VA
Short Circuit Current Rating >Basic Rating >max. Fuse	1.4 W
Short Circuit Current Rating >Basic Rating >max. CB	100 % DF
Short Circuit Current Rating >480 V High Fault >SCCR (fuse)	15 - 21 ms
Short Circuit Current Rating >480 V High Fault >max. Fuse	9 - 18 ms
Short Circuit Current Rating >600 V High Fault >SCCR (fuse)	≦ 1 mA
Short Circuit Current Rating >600 V High Fault >max. Fuse
Special Purpose Ratings >Electrical Discharge Lamps (Ballast) >480V 60Hz 3phase, 277V 60Hz 1phase	20 A
Special Purpose Ratings >Electrical Discharge Lamps (Ballast) >600V 60Hz 3phase, 347V 60Hz 1phase	5 kA
Special Purpose Ratings >Incandescent Lamps (Tungsten) >480V 60Hz 3phase, 277V 60Hz 1phase	45 A
Special Purpose Ratings >Incandescent Lamps (Tungsten) >600V 60Hz 3phase, 347V 60Hz 1phase	60 A
Special Purpose Ratings >Resistance Air Heating >480V 60Hz 3phase, 277V 60Hz 1phase	30 kA
Special Purpose Ratings >Resistance Air Heating >600V 60Hz 3phase, 347V 60Hz 1phase	25 Class RK5 A
Special Purpose Ratings >Refrigeration Control (CSA only) >LRA 480V 60Hz 3phase	30 kA
Special Purpose Ratings >Refrigeration Control (CSA only) >FLA 480V 60Hz 3phase	25 Class RK5 A
Special Purpose Ratings >Refrigeration Control (CSA only) >LRA 600V 60Hz 3phase	20 A
Special Purpose Ratings >Refrigeration Control (CSA only) >FLA 600V 60Hz 3phase	20 A
Special Purpose Ratings >Elevator Control >600V 60Hz 3phase	14 A
Special Purpose Ratings >Elevator Control >600V 60Hz 3phase	14 A
Rated operational current for specified heat dissipation [In]	20 A
Heat dissipation per pole, current-dependent [Pvid]	20 A
Equipment heat dissipation, current-dependent [Pvid]	60 A
Static heat dissipation, non-current-dependent [Pvs]	10 A
Heat dissipation capacity [Pdiss]	60 A
Operating ambient temperature min.	10 A
Operating ambient temperature max.	5 HP
10.2 Strength of materials and parts >10.2.2 Corrosion resistance	6.1 A
10.2 Strength of materials and parts >10.2.3.1 Verification of thermal stability of enclosures
10.2 Strength of materials and parts >10.2.3.2 Verification of resistance of insulating materials to normal heat	22 A
10.2 Strength of materials and parts >10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects	1 W
10.2 Strength of materials and parts >10.2.4 Resistance to ultra-violet (UV) radiation	3 W
10.2 Strength of materials and parts >10.2.5 Lifting	1.4 W
10.2 Strength of materials and parts >10.2.6 Mechanical impact	0 W
10.2 Strength of materials and parts >10.2.7 Inscriptions	-25 °C
10.3 Degree of protection of ASSEMBLIES	+60 °C
10.4 Clearances and creepage distances
10.5 Protection against electric shock	Meets the product standard´s requirements.
10.6 Incorporation of switching devices and components	Meets the product standard´s requirements.
10.7 Internal electrical circuits and connections	Meets the product standard´s requirements.
10.8 Connections for external conductors	Meets the product standard´s requirements.
10.9 Insulation properties >10.9.2 Power-frequency electric strength	Meets the product standard´s requirements.
10.9 Insulation properties >10.9.3 Impulse withstand voltage	Does not apply, since the entire switchgear needs to be evaluated.
10.9 Insulation properties >10.9.4 Testing of enclosures made of insulating material	Does not apply, since the entire switchgear needs to be evaluated.
10.10 Temperature rise	Meets the product standard´s requirements.
10.11 Short-circuit rating	Does not apply, since the entire switchgear needs to be evaluated.
10.12 Electromagnetic compatibility	Meets the product standard´s requirements.
10.13 Mechanical function	Does not apply, since the entire switchgear needs to be evaluated.
Rated control supply voltage Us at AC 50HZ	Does not apply, since the entire switchgear needs to be evaluated.
Rated control supply voltage Us at AC 60HZ	Is the panel builder´s responsibility.
Rated control supply voltage Us at DC	Is the panel builder´s responsibility.
Voltage type for actuating	Is the panel builder´s responsibility.
Rated operation current Ie at AC-1, 400 V	Is the panel builder´s responsibility.
Rated operation current Ie at AC-3, 400 V	Is the panel builder´s responsibility.
Rated operation power at AC-3, 400 V	The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
Rated operation current Ie at AC-4, 400 V	Is the panel builder´s responsibility. The specifications for the switchgear must be observed.
Rated operation power at AC-4, 400 V	Is the panel builder´s responsibility. The specifications for the switchgear must be observed.
Rated operation power NEMA	The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
Modular version
Number of auxiliary contacts as normally open contact
Number of auxiliary contacts as normally closed contact	220 - 220 V
Type of electrical connection of main circuit	220 - 220 V
Number of normally closed contacts as main contact	0 - 0 V
Number of main contacts as normally open contact	AC
Product Standards	22 A
UL File No.	12 A
UL Category Control No.	5.5 kW
CSA File No.	10 A
CSA Class No.	4.5 kW
North America Certification	0 kW
Specially designed for North America	No
Accessories	0
Characteristic curve	0

Mnelko olarak, endüstriyel otomasyon çözümlerinde güvenilir bir iş ortağı olarak, geniş ürün yelpazesi ile işletmenizin tüm ihtiyaçlarını karşılamaya yönelik kaliteli ve yenilikçi ürünler sunmaktayız. Ürün portföyümüz, modern endüstriyel süreçleri desteklemek amacıyla yüksek performans, dayanıklılık ve verimlilik ilkeleri doğrultusunda tasarlanmış çözümlerden oluşur.
Tüm ürünlerimiz, zorlu çalışma koşullarında dahi maksimum güvenilirlik sunar ve işletmenizin operasyonlarını sorunsuz şekilde sürdürmesine yardımcı olur. Endüstriyel otomasyon, enerji yönetimi, kablolama çözümleri ve daha birçok alanda sunduğumuz ürünler, farklı sektörlerdeki ihtiyaçlara esneklikle uyum sağlar.
Ayrıca, ürünlerimiz sadece kaliteli malzemelerle üretilmiş olup, uluslararası standartlara uygunluk göstermektedir. Müşterilerimize sunduğumuz çözümlerle, operasyonel verimliliklerini artırmalarına ve maliyetlerini optimize etmelerine olanak tanıyoruz. Teknolojik gelişmeleri yakından takip eden firmamız, sürekli olarak yenilikçi ürünler sunarak, müşterilerimizin rekabet avantajı elde etmesine destek vermektedir.
Her bir ürün sayfamızda, teknik detaylar, kullanım alanları ve ürün özelliklerine dair kapsamlı bilgilere ulaşabilirsiniz. Endüstriyel süreçlerinizi güçlendirmek için ihtiyacınız olan tüm ürünleri sitemizden keşfedebilir, sorunsuz bir satın alma deneyimi yaşayabilirsiniz.