DILMF17-01(RAC24)
104438 DILMF17-01(RAC24)
104438

Semiconductor Industries için Kontaktörler acc. SEMI F47'ye göre, 380 V 400 V: 18 A, 1 NC, RAC 24: 24 V 50/60 Hz, Vidalı terminaller
Kontaktör, Uygulama: Semiconductor Industries için Kontaktörler acc. SEMI F47'ye uygun, 150 A'e kadar elektronik aktivasyonlu kontaktörler, Kullanım kategorisi: AC-1: Endüktif olmayan veya hafif endüktif yükler, dirençli fırınlar, NAC-3: Normal AC endüksiyon motorları: başlatma, çalışma sırasında kapatma, AC-4 : Normal AC endüksiyon motorları: başlatma, takma, ters çevirme, tekleme, Bağlantı tekniği: Vidalı terminaller, Notlar: IE3 verimlilik sınıfına sahip motorlar için de uygundur, IE3'e hazır cihazlar ambalajlarının üzerindeki logo ile tanımlanır., Nominal çalışma akımı AC -3 380 V 400 V: Ie= 18 A, Nominal çalışma akımı AC-1 Konvansiyonel serbest hava termal akımı, 3 kutuplu, 50 - 60 Hz 40 °C'de açık: Ith =Ie= 40 A, kapalı: Ith= 32 A , Nominal çalışma akımı AC-1 Konvansiyonel serbest hava termal akımı, 1 kutup açık: Ith= 88 A, kapalı: Ith= 80 A, Maks. üç fazlı motorlar için nominal değer, 50 - 60 Hz AC-3 220 V 230 V: P= 5 kW, 380 V 400 V: P= 7,5 kW, 660 V 690 V: P= 11 kW, Maks. üç fazlı motorlar için nominal değer, 50 - 60 Hz AC-4 220 V 230 V: P= 2,5 kW, 380 V 400 V: P= 4,5 kW, 660 V 690 V: P= 6,5 kW, Kontaklar N/C = Normalde kapalı: 1 NC, Talimatlar: EN 50 012'ye uygun kontaklar, dahili baskılayıcı devre', ayna kontaklı.

Product range	Contactors
Application	Contactors for Semiconductor Industries acc. to SEMI F47
Subrange	Contactors up to 150 A with electronic actuation
Utilization category	AC-1: Non-inductive or slightly inductive loads, resistance furnaces NAC-3: Normal AC induction motors: starting, switch off during running AC-4: Normal AC induction motors: starting, plugging, reversing, inching
Notes
Connection technique	Also suitable for motors with efficiency class IE3. IE3-ready devices are identified by the logo on their packaging.
AC-3 >380 V 400 V [Ie]	Screw terminals
AC-1 >Conventional free air thermal current, 3 pole, 50 - 60 Hz >Open >at 40 °C [Ith =Ie]
AC-1 >Conventional free air thermal current, 3 pole, 50 - 60 Hz >enclosed [Ith ]	18 A
AC-1 >Conventional free air thermal current, 1 pole >open [Ith ]	40 A
AC-1 >Conventional free air thermal current, 1 pole >enclosed [Ith ]	32 A
AC-3 >220 V 230 V [P]	88 A
AC-3 >380 V 400 V [P]	80 A
AC-3 >660 V 690 V [P]
AC-4 >220 V 230 V [P]	5 kW
AC-4 >380 V 400 V [P]	7.5 kW
AC-4 >660 V 690 V [P]	11 kW
N/C = Normally closed	2.5 kW
Contact sequence	4.5 kW
Actuating voltage	6.5 kW
Instructions
Mounting position	1 NC
Altitude
AC-1 >Rated operational current >Conventional free air thermal current, 3 pole, 50 - 60 Hz >Open >at 40 °C [Ith =Ie]	RAC 24: 24 V 50/60 Hz
AC-1 >Rated operational current >Conventional free air thermal current, 3 pole, 50 - 60 Hz >Open >at 50 °C [Ith =Ie]	Contacts to EN 50 012. built-in suppressor circuit´ with mirror contact. integrated suppressor circuit in actuating electronics
AC-1 >Rated operational current >Conventional free air thermal current, 3 pole, 50 - 60 Hz >Open >at 60 °C [Ith =Ie]
AC-1 >Rated operational current >Conventional free air thermal current, 3 pole, 50 - 60 Hz >enclosed [Ith ]
AC-1 >Rated operational current >Conventional free air thermal current, 1 pole >open [Ith ]	Max. 2000 m
AC-1 >Rated operational current >Conventional free air thermal current, 1 pole >enclosed [Ith ]
AC-3 >Rated operational current >Open, 3-pole: 50 – 60 Hz >Notes	40 A
AC-3 >Rated operational current >Open, 3-pole: 50 – 60 Hz >220 V 230 V [Ie]	38 A
AC-3 >Rated operational current >Open, 3-pole: 50 – 60 Hz >240 V [Ie]	35 A
AC-3 >Rated operational current >Open, 3-pole: 50 – 60 Hz >380 V 400 V [Ie]	32 A
AC-3 >Rated operational current >Open, 3-pole: 50 – 60 Hz >415 V [Ie]	88 A
AC-3 >Rated operational current >Open, 3-pole: 50 – 60 Hz >440V [Ie]	80 A
AC-3 >Rated operational current >Open, 3-pole: 50 – 60 Hz >500 V [Ie]	At maximum permissible ambient temperature (open.)
AC-3 >Rated operational current >Open, 3-pole: 50 – 60 Hz >660 V 690 V [Ie]	18 A
AC-3 >Motor rating [P] >220 V 230 V [P]	18 A
AC-3 >Motor rating [P] >240V [P]	18 A
AC-3 >Motor rating [P] >380 V 400 V [P]	18 A
AC-3 >Motor rating [P] >415 V [P]	18 A
AC-3 >Motor rating [P] >440 V [P]	18 A
AC-3 >Motor rating [P] >500 V [P]	12 A
AC-3 >Motor rating [P] >660 V 690 V [P]	5 kW
AC-4 >Open, 3-pole: 50 – 60 Hz >220 V 230 V [Ie ]	5.5 kW
AC-4 >Open, 3-pole: 50 – 60 Hz >240 V [Ie ]	7.5 kW
AC-4 >Open, 3-pole: 50 – 60 Hz >380 V 400 V [Ie ]	10 kW
AC-4 >Open, 3-pole: 50 – 60 Hz >415 V [Ie ]	10.5 kW
AC-4 >Open, 3-pole: 50 – 60 Hz >440 V [Ie ]	12 kW
AC-4 >Open, 3-pole: 50 – 60 Hz >500 V [Ie ]	11 kW
AC-4 >Open, 3-pole: 50 – 60 Hz >660 V 690 V [Ie ]	10 A
AC-4 >Motor rating [P] >220 V 230 V [P]	10 A
AC-4 >Motor rating [P] >240 V [P]	10 A
AC-4 >Motor rating [P] >380 V 400 V [P]	10 A
AC-4 >Motor rating [P] >415 V [P]	10 A
AC-4 >Motor rating [P] >440 V [P]	10 A
AC-4 >Motor rating [P] >500 V [P]	8 A
AC-4 >Motor rating [P] >660 V 690 V [P]	2.5 kW
3 pole, at Ith (60°)	3 kW
Current heat loss at Ie to AC-3/400 V	4.5 kW
Voltage tolerance >AC operated [Pick-up]	5 kW
Voltage tolerance >Drop-out voltage AC operated [Drop-out]	5.5 kW
Power consumption of the coil in a cold state and 1.0 x US >Electronic actuation [Pick-up]	6 kW
Power consumption of the coil in a cold state and 1.0 x US >Electronic actuation [Sealing]	6.5 kW
Power consumption of the coil in a cold state and 1.0 x US >Electronic actuation [Sealing]
Duty factor	7.3 W
Operating times >Closing delay	2.1 W
Operating times >Opening delay
-suitable according to	0.8 - 1.15 x Uc
Emitted interference	0.2 - 0.5 x Uc
Interference immunity	14 VA
like the contactar [DIL]	0.7 VA
Switching capacity >Maximum motor rating >Three-phase >200 V 208 V	0.8 W
Switching capacity >Maximum motor rating >Three-phase >230 V 240 V	100 % DF
Switching capacity >Maximum motor rating >Three-phase >460 V 480 V	40 ms
Switching capacity >Maximum motor rating >Three-phase >575 V 600 V	45 ms
Switching capacity >Maximum motor rating >Single-phase >115 V 120 V	SEMI F47
Switching capacity >Maximum motor rating >Single-phase >230 V 240 V
Switching capacity >General use	according to EN 60947-1
Auxiliary contacts >Pilot Duty >AC operated	according to EN 60947-1
Auxiliary contacts >Pilot Duty >DC operated
Auxiliary contacts >General Use >AC	M17
Auxiliary contacts >General Use >AC
Auxiliary contacts >General Use >DC	5 HP
Auxiliary contacts >General Use >DC	5 HP
Short Circuit Current Rating >Basic Rating >SCCR	10 HP
Short Circuit Current Rating >Basic Rating >max. Fuse	15 HP
Short Circuit Current Rating >Basic Rating >max. CB	2 HP
Short Circuit Current Rating >480 V High Fault >SCCR (fuse)	3 HP
Short Circuit Current Rating >480 V High Fault >max. Fuse	40 A
Short Circuit Current Rating >480 V High Fault >SCCR (CB)	A600
Short Circuit Current Rating >480 V High Fault >max. CB	P300
Short Circuit Current Rating >600 V High Fault >SCCR (fuse)	600 V
Short Circuit Current Rating >600 V High Fault >max. Fuse	10 A
Short Circuit Current Rating >600 V High Fault >SCCR (CB)	250 V
Short Circuit Current Rating >600 V High Fault >max. CB	1 A
Special Purpose Ratings >Electrical Discharge Lamps (Ballast) >480V 60Hz 3phase, 277V 60Hz 1phase	5 kA
Special Purpose Ratings >Electrical Discharge Lamps (Ballast) >600V 60Hz 3phase, 347V 60Hz 1phase	125 A
Special Purpose Ratings >Incandescent Lamps (Tungsten) >480V 60Hz 3phase, 277V 60Hz 1phase	125 A
Special Purpose Ratings >Incandescent Lamps (Tungsten) >600V 60Hz 3phase, 347V 60Hz 1phase	10/100 kA
Special Purpose Ratings >Resistance Air Heating >480V 60Hz 3phase, 277V 60Hz 1phase	125/70 Class J A
Special Purpose Ratings >Resistance Air Heating >600V 60Hz 3phase, 347V 60Hz 1phase	10/65 kA
Special Purpose Ratings >Refrigeration Control (CSA only) >LRA 480V 60Hz 3phase	50/32 A
Special Purpose Ratings >Refrigeration Control (CSA only) >FLA 480V 60Hz 3phase	10/100 kA
Special Purpose Ratings >Refrigeration Control (CSA only) >LRA 600V 60Hz 3phase	125/70 Class J A
Special Purpose Ratings >Refrigeration Control (CSA only) >FLA 600V 60Hz 3phase	10/22 kA
Special Purpose Ratings >Definite Purpose Ratings (100,000 cycles acc. to UL 1995) >LRA 480V 60Hz 3phase	50/32 A
Special Purpose Ratings >Definite Purpose Ratings (100,000 cycles acc. to UL 1995) >FLA 480V 60Hz 3phase	40 A
Special Purpose Ratings >Elevator Control >200V 60Hz 3phase	40 A
Special Purpose Ratings >Elevator Control >200V 60Hz 3phase	40 A
Special Purpose Ratings >Elevator Control >240V 60Hz 3phase	40 A
Special Purpose Ratings >Elevator Control >240V 60Hz 3phase	40 A
Special Purpose Ratings >Elevator Control >480V 60Hz 3phase	40 A
Special Purpose Ratings >Elevator Control >480V 60Hz 3phase	240 A
Special Purpose Ratings >Elevator Control >600V 60Hz 3phase	40 A
Special Purpose Ratings >Elevator Control >600V 60Hz 3phase	180 A
Rated operational current for specified heat dissipation [In]	30 A
Heat dissipation per pole, current-dependent [Pvid]	108 A
Equipment heat dissipation, current-dependent [Pvid]	18 A
Static heat dissipation, non-current-dependent [Pvs]	3 HP
Heat dissipation capacity [Pdiss]	11 A
Operating ambient temperature min.	3 HP
Operating ambient temperature max.	9.6 A
10.2 Strength of materials and parts >10.2.2 Corrosion resistance	7.5 HP
10.2 Strength of materials and parts >10.2.3.1 Verification of thermal stability of enclosures	11 A
10.2 Strength of materials and parts >10.2.3.2 Verification of resistance of insulating materials to normal heat	10 HP
10.2 Strength of materials and parts >10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects	11 A
10.2 Strength of materials and parts >10.2.4 Resistance to ultra-violet (UV) radiation
10.2 Strength of materials and parts >10.2.5 Lifting	18 A
10.2 Strength of materials and parts >10.2.6 Mechanical impact	0.7 W
10.2 Strength of materials and parts >10.2.7 Inscriptions	2.1 W
10.3 Degree of protection of ASSEMBLIES	0.8 W
10.4 Clearances and creepage distances	0 W
10.5 Protection against electric shock	-25 °C
10.6 Incorporation of switching devices and components	+60 °C
10.7 Internal electrical circuits and connections
10.8 Connections for external conductors	Meets the product standard´s requirements.
10.9 Insulation properties >10.9.2 Power-frequency electric strength	Meets the product standard´s requirements.
10.9 Insulation properties >10.9.3 Impulse withstand voltage	Meets the product standard´s requirements.
10.9 Insulation properties >10.9.4 Testing of enclosures made of insulating material	Meets the product standard´s requirements.
10.10 Temperature rise	Meets the product standard´s requirements.
10.11 Short-circuit rating	Does not apply, since the entire switchgear needs to be evaluated.
10.12 Electromagnetic compatibility	Does not apply, since the entire switchgear needs to be evaluated.
10.13 Mechanical function	Meets the product standard´s requirements.
Rated control supply voltage Us at AC 50HZ	Does not apply, since the entire switchgear needs to be evaluated.
Rated control supply voltage Us at AC 60HZ	Meets the product standard´s requirements.
Rated control supply voltage Us at DC	Does not apply, since the entire switchgear needs to be evaluated.
Voltage type for actuating	Does not apply, since the entire switchgear needs to be evaluated.
Rated operation current Ie at AC-1, 400 V	Is the panel builder´s responsibility.
Rated operation current Ie at AC-3, 400 V	Is the panel builder´s responsibility.
Rated operation power at AC-3, 400 V	Is the panel builder´s responsibility.
Rated operation current Ie at AC-4, 400 V	Is the panel builder´s responsibility.
Rated operation power at AC-4, 400 V	Is the panel builder´s responsibility.
Rated operation power NEMA	The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
Modular version	Is the panel builder´s responsibility. The specifications for the switchgear must be observed.
Number of auxiliary contacts as normally open contact	Is the panel builder´s responsibility. The specifications for the switchgear must be observed.
Number of auxiliary contacts as normally closed contact	The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
Type of electrical connection of main circuit
Number of normally closed contacts as main contact
Number of main contacts as normally open contact	24 - 24 V
Product Standards	24 - 24 V
UL File No.	0 - 0 V
UL Category Control No.	AC
CSA File No.	35 A
CSA Class No.	18 A
North America Certification	7.5 kW
Specially designed for North America	10 A
Accessories	4.5 kW
Characteristic curve	7.4 kW
Characteristic curve	No

Mnelko olarak, endüstriyel otomasyon çözümlerinde güvenilir bir iş ortağı olarak, geniş ürün yelpazesi ile işletmenizin tüm ihtiyaçlarını karşılamaya yönelik kaliteli ve yenilikçi ürünler sunmaktayız. Ürün portföyümüz, modern endüstriyel süreçleri desteklemek amacıyla yüksek performans, dayanıklılık ve verimlilik ilkeleri doğrultusunda tasarlanmış çözümlerden oluşur.
Tüm ürünlerimiz, zorlu çalışma koşullarında dahi maksimum güvenilirlik sunar ve işletmenizin operasyonlarını sorunsuz şekilde sürdürmesine yardımcı olur. Endüstriyel otomasyon, enerji yönetimi, kablolama çözümleri ve daha birçok alanda sunduğumuz ürünler, farklı sektörlerdeki ihtiyaçlara esneklikle uyum sağlar.
Ayrıca, ürünlerimiz sadece kaliteli malzemelerle üretilmiş olup, uluslararası standartlara uygunluk göstermektedir. Müşterilerimize sunduğumuz çözümlerle, operasyonel verimliliklerini artırmalarına ve maliyetlerini optimize etmelerine olanak tanıyoruz. Teknolojik gelişmeleri yakından takip eden firmamız, sürekli olarak yenilikçi ürünler sunarak, müşterilerimizin rekabet avantajı elde etmesine destek vermektedir.
Her bir ürün sayfamızda, teknik detaylar, kullanım alanları ve ürün özelliklerine dair kapsamlı bilgilere ulaşabilirsiniz. Endüstriyel süreçlerinizi güçlendirmek için ihtiyacınız olan tüm ürünleri sitemizden keşfedebilir, sorunsuz bir satın alma deneyimi yaşayabilirsiniz.