DILMC7-10(24V50/60HZ)
277393 DILMC7-10(24V50/60HZ)
277393

Kontaktör, 3 kutuplu, 380 V 400 V 3 kW, 1 N/A, 24 V 50/60 Hz, AC çalışma, Yaylı terminaller
Kontaktör, Uygulama: Motorlar için Kontaktörler, 170 A'e kadar kontaktörler, 3 kutuplu, Kullanım kategorisi: AC-1: Endüktif olmayan veya hafif endüktif yükler, dirençli fırınlar, NAC-3: Normal AC endüksiyon motorları: başlatma, çalışma sırasında kapatma , AC-4: Normal AC endüksiyon motorları: başlatma, takma, ters çevirme, yavaş yavaş çalıştırma, Bağlantı tekniği: Yaylı terminaller, Notlar: IE3 verimlilik sınıfına sahip motorlar için de uygundur, IE3'e hazır cihazlar ambalajlarının üzerindeki logoyla tanımlanır ., Kutup sayısı: 3 kutuplu, Nominal çalışma akımı AC-3 380 V 400 V: Ie= 7 A, Nominal çalışma akımı AC-1 Konvansiyonel serbest hava termal akımı, 3 kutuplu, 50 - 60 Hz 40 °C'de açık: Ith =Ie= 22 A, kapalı: Ith= 18 A, Nominal çalışma akımı AC-1 Konvansiyonel serbest hava termal akımı, 1 kutup açık: Ith= 50 A, kapalı: Ith= 45 A, Maks. üç fazlı motorlar için nominal değer, 50 - 60 Hz AC-3 220 V 230 V: P= 2,2 kW, 380 V 400 V: P= 3 kW, 660 V 690 V: P= 3,5 kW, Maks. üç fazlı motorlar için nominal değer, 50 - 60 Hz AC-4 220 V 230 V: P= 1 kW, 380 V 400 V: P= 2,2 kW, 660 V 690 V: P= 2,9 kW, Yardımcı kontakla birleştirilebilir : DILM32-XHIC.., DILA-XHIC(V).., Kontaklar N/O = Normalde açık: 1 N/O, Talimatlar: EN 50 012'ye göre kontaklar, Yaylı yardımcı akım, bobin ve ana akım terminalleri kafes bağlantı teknolojisi., Gerilim AC/DC: AC çalışması

Product range	Contactors
Application	Contactors for Motors
Subrange	Contactors up to 170 A, 3 pole
Utilization category	AC-1: Non-inductive or slightly inductive loads, resistance furnaces NAC-3: Normal AC induction motors: starting, switch off during running AC-4: Normal AC induction motors: starting, plugging, reversing, inching
Notes
Connection technique	Also suitable for motors with efficiency class IE3. IE3-ready devices are identified by the logo on their packaging.
Number of poles	Spring-loaded terminals
AC-3 >Notes	3 pole
AC-3 >380 V 400 V [Ie]
AC-1 >Conventional free air thermal current, 3 pole, 50 - 60 Hz >Open >at 40 °C [Ith =Ie]	At maximum permissible ambient temperature (open.)
AC-1 >Conventional free air thermal current, 3 pole, 50 - 60 Hz >enclosed [Ith ]	7 A
AC-1 >Conventional free air thermal current, 1 pole >open [Ith ]	22 A
AC-1 >Conventional free air thermal current, 1 pole >enclosed [Ith ]	18 A
AC-3 >220 V 230 V [P]	50 A
AC-3 >380 V 400 V [P]	45 A
AC-3 >660 V 690 V [P]
AC-4 >220 V 230 V [P]	2.2 kW
AC-4 >380 V 400 V [P]	3 kW
AC-4 >660 V 690 V [P]	3.5 kW
N/O = Normally open	1 kW
Contact sequence	2.2 kW
Instructions	2.9 kW
Can be combined with auxiliary contact
Actuating voltage	1 N/O
Voltage AC/DC
Connection to SmartWire-DT	Contacts to EN 50 012. Auxiliary current, coil, and main current terminals with spring-cage connection technology.
Frame size	DILM32-XHIC… DILA-XHIC(V)…
Standards	24 V 50/60 Hz
Lifespan, mechanical >AC operated [Operations]	AC operation
Operating frequency, mechanical >AC operated [Operations/h]	no
Climatic proofing	1
Ambient temperature >Open
Ambient temperature >Enclosed	IEC/EN 60947, VDE 0660, UL, CSA
Ambient temperature >Storage	10 x 106
Mounting position	9000
Mechanical shock resistance (IEC/EN 60068-2-27) >Half-sinusoidal shock, 10 ms >Main contacts >N/O contact	Damp heat, constant, to IEC 60068-2-78 Damp heat, cyclic, to IEC 60068-2-30
Mechanical shock resistance (IEC/EN 60068-2-27) >Half-sinusoidal shock, 10 ms >Auxiliary contacts >N/O contact	-25 - +60 °C
Mechanical shock resistance (IEC/EN 60068-2-27) >Half-sinusoidal shock, 10 ms >Auxiliary contacts >N/C contact	- 25 - 40 °C
Mechanical shock resistance (IEC/EN 60068-2-27) when tabletop-mounted >Half-sinusoidal shock, 10 ms >Main contacts >N/O contact	- 40 - 80 °C
Mechanical shock resistance (IEC/EN 60068-2-27) when tabletop-mounted >Half-sinusoidal shock, 10 ms >Auxiliary contacts >N/O contact
Mechanical shock resistance (IEC/EN 60068-2-27) when tabletop-mounted >Half-sinusoidal shock, 10 ms >Auxiliary contacts >N/C contact	10 g
Degree of Protection	7 g
Protection against direct contact when actuated from front (EN 50274)	5 g
Altitude	5.7 g
Weight >AC operated	3.4 g
Spring-loaded terminal connection >Terminal capacity main cable >Solid	3.4 g
Spring-loaded terminal connection >Terminal capacity main cable >flexible	IP20
Spring-loaded terminal connection >Terminal capacity main cable >flexible with ferrules	Finger and back-of-hand proof
Spring-loaded terminal connection >Terminal capacity main cable >Solid or stranded	Max. 2000 m
Spring-loaded terminal connection >Terminal capacity main cable >Stripping length	0.23 kg
Spring-loaded terminal connection >Terminal capacity control circuit cables >Solid	1 x (0.75 - 2.5) 2 x (0.75 - 2.5) mm2
Spring-loaded terminal connection >Terminal capacity control circuit cables >Flexible	1 x (0.75 - 2.5) 2 x (0.75 - 2.5) mm2
Spring-loaded terminal connection >Terminal capacity control circuit cables >Flexible with ferrule	1 x (0.75 - 1.5) 2 x (0.75 - 1.5) mm2
Spring-loaded terminal connection >Terminal capacity control circuit cables >Solid or stranded	18 - 14 AWG
Spring-loaded terminal connection >Terminal capacity control circuit cables >Stripping length	10 mm
Spring-loaded terminal connection >Tool >Screwdriver blade width	1 x (0.75 - 2.5) 2 x (0.75 - 2.5) mm2
Push-in terminals >Terminal capacity main cable >Solid or stranded	1 x (0.75 - 2.5) 2 x (0.75 - 2.5) mm2
Rated impulse withstand voltage [Uimp]	1 x (0.75 - 1.5) 2 x (0.75 - 1.5) mm2
Overvoltage category/pollution degree	18 - 14 AWG
Rated insulation voltage [Ui]	10 mm
Rated operational voltage [Ue]	3.5 mm
Safe isolation to EN 61140 >between coil and contacts	18 - 14 AWG
Safe isolation to EN 61140 >between the contacts
Making capacity (p.f. to IEC/EN 60947) [Up to 690 V]	8000 V AC
Breaking capacity >220 V 230 V	III/3
Breaking capacity >380 V 400 V	690 V AC
Breaking capacity >500 V	690 V AC
Breaking capacity >660 V 690 V	400 V AC
Short-circuit rating >Short-circuit protection maximum fuse >Type “2” coordination >400 V [gG/gL 500 V]	400 V AC
Short-circuit rating >Short-circuit protection maximum fuse >Type “2” coordination >690 V [gG/gL 690 V]	112 A
Short-circuit rating >Short-circuit protection maximum fuse >Type “1” coordination >400 V [gG/gL 500 V]	70 A
Short-circuit rating >Short-circuit protection maximum fuse >Type “1” coordination >690 V [gG/gL 690 V]	70 A
AC-1 >Rated operational current >Conventional free air thermal current, 3 pole, 50 - 60 Hz >Open >at 40 °C [Ith =Ie]	50 A
AC-1 >Rated operational current >Conventional free air thermal current, 3 pole, 50 - 60 Hz >Open >at 50 °C [Ith =Ie]	40 A
AC-1 >Rated operational current >Conventional free air thermal current, 3 pole, 50 - 60 Hz >Open >at 55 °C [Ith =Ie]	20 A
AC-1 >Rated operational current >Conventional free air thermal current, 3 pole, 50 - 60 Hz >Open >at 60 °C [Ith =Ie]	16 A
AC-1 >Rated operational current >Conventional free air thermal current, 3 pole, 50 - 60 Hz >enclosed [Ith ]	35 A
AC-1 >Rated operational current >Conventional free air thermal current, 1 pole >open [Ith ]	20 A
AC-1 >Rated operational current >Conventional free air thermal current, 1 pole >enclosed [Ith ]
AC-3 >Rated operational current >Open, 3-pole: 50 – 60 Hz >Notes	22 A
AC-3 >Rated operational current >Open, 3-pole: 50 – 60 Hz >220 V 230 V [Ie]	21 A
AC-3 >Rated operational current >Open, 3-pole: 50 – 60 Hz >240 V [Ie]	21 A
AC-3 >Rated operational current >Open, 3-pole: 50 – 60 Hz >380 V 400 V [Ie]	20 A
AC-3 >Rated operational current >Open, 3-pole: 50 – 60 Hz >415 V [Ie]	18 A
AC-3 >Rated operational current >Open, 3-pole: 50 – 60 Hz >440V [Ie]	50 A
AC-3 >Rated operational current >Open, 3-pole: 50 – 60 Hz >500 V [Ie]	45 A
AC-3 >Rated operational current >Open, 3-pole: 50 – 60 Hz >660 V 690 V [Ie]	At maximum permissible ambient temperature (open.)
AC-3 >Rated operational current >Open, 3-pole: 50 – 60 Hz >380 V 400 V [Ie]	7 A
AC-3 >Motor rating [P] >220 V 230 V [P]	7 A
AC-3 >Motor rating [P] >240V [P]	7 A
AC-3 >Motor rating [P] >380 V 400 V [P]	7 A
AC-3 >Motor rating [P] >415 V [P]	7 A
AC-3 >Motor rating [P] >440 V [P]	5 A
AC-3 >Motor rating [P] >500 V [P]	4 A
AC-3 >Motor rating [P] >660 V 690 V [P]	7 A
AC-4 >Open, 3-pole: 50 – 60 Hz >220 V 230 V [Ie ]	2.2 kW
AC-4 >Open, 3-pole: 50 – 60 Hz >240 V [Ie ]	2.2 kW
AC-4 >Open, 3-pole: 50 – 60 Hz >380 V 400 V [Ie ]	3 kW
AC-4 >Open, 3-pole: 50 – 60 Hz >415 V [Ie ]	4 kW
AC-4 >Open, 3-pole: 50 – 60 Hz >440 V [Ie ]	4.5 kW
AC-4 >Open, 3-pole: 50 – 60 Hz >500 V [Ie ]	3.5 kW
AC-4 >Open, 3-pole: 50 – 60 Hz >660 V 690 V [Ie ]	3.5 kW
AC-4 >Motor rating [P] >220 V 230 V [P]	5 A
AC-4 >Motor rating [P] >240 V [P]	5 A
AC-4 >Motor rating [P] >380 V 400 V [P]	5 A
AC-4 >Motor rating [P] >415 V [P]	5 A
AC-4 >Motor rating [P] >440 V [P]	5 A
AC-4 >Motor rating [P] >500 V [P]	4.5 A
AC-4 >Motor rating [P] >660 V 690 V [P]	4 A
Rated operational current, open >DC-1 >60 V [Ie ]	1 kW
Rated operational current, open >DC-1 >110 V [Ie ]	1.5 kW
Rated operational current, open >DC-1 >220 V [Ie ]	2.2 kW
3 pole, at Ith (60°)	2.3 kW
Current heat loss at Ie to AC-3/400 V	2.4 kW
Impedance per pole	2.5 kW
Voltage tolerance >AC operated [Pick-up]	2.9 kW
Voltage tolerance >Drop-out voltage AC operated [Drop-out]
Power consumption of the coil in a cold state and 1.0 x US >50/60 Hz [Pick-up]	20 A
Power consumption of the coil in a cold state and 1.0 x US >50/60 Hz [Sealing]	20 A
Power consumption of the coil in a cold state and 1.0 x US >50/60 Hz [Sealing]	15 A
Duty factor
Changeover time at 100 % US (recommended value) >Main contacts >AC operated >Closing delay	2.4 W
Changeover time at 100 % US (recommended value) >Main contacts >AC operated >Opening delay	0.3 W
Changeover time at 100 % US (recommended value) >Arcing time	2.5 mΩ
Lifespan, mechanical; Coil 50/60 Hz
Emitted interference	0.8 - 1.1 x Uc
Interference immunity	0.3 - 0.6 x Uc
Switching capacity >Maximum motor rating >Three-phase >200 V 208 V	27 25 VA
Switching capacity >Maximum motor rating >Three-phase >230 V 240 V	4.2 3.3 VA
Switching capacity >Maximum motor rating >Three-phase >460 V 480 V	1.4 1.2 W
Switching capacity >Maximum motor rating >Three-phase >575 V 600 V	100 % DF
Switching capacity >Maximum motor rating >Single-phase >115 V 120 V	15 - 21 ms
Switching capacity >Maximum motor rating >Single-phase >230 V 240 V	9 - 18 ms
Switching capacity >General use	10 ms
Auxiliary contacts >Pilot Duty >AC operated	Mechanical lifespan at 50 Hz approx. 30% lower than under ￫ Technical data general x 106
Auxiliary contacts >Pilot Duty >DC operated
Auxiliary contacts >General Use >AC	to EN 60947-1
Auxiliary contacts >General Use >AC	to EN 60947-1
Auxiliary contacts >General Use >DC
Auxiliary contacts >General Use >DC	1.5 HP
Short Circuit Current Rating >Basic Rating >SCCR	2 HP
Short Circuit Current Rating >Basic Rating >max. Fuse	3 HP
Short Circuit Current Rating >Basic Rating >max. CB	5 HP
Short Circuit Current Rating >480 V High Fault >SCCR (fuse)	0.25 HP
Short Circuit Current Rating >480 V High Fault >max. Fuse	1 HP
Short Circuit Current Rating >480 V High Fault >SCCR (CB)	20 A
Short Circuit Current Rating >480 V High Fault >max. CB	A600
Short Circuit Current Rating >600 V High Fault >SCCR (fuse)	P300
Short Circuit Current Rating >600 V High Fault >max. Fuse	600 V
Special Purpose Ratings >Electrical Discharge Lamps (Ballast) >480V 60Hz 3phase, 277V 60Hz 1phase	10 A
Special Purpose Ratings >Electrical Discharge Lamps (Ballast) >600V 60Hz 3phase, 347V 60Hz 1phase	250 V
Special Purpose Ratings >Incandescent Lamps (Tungsten) >480V 60Hz 3phase, 277V 60Hz 1phase	1 A
Special Purpose Ratings >Incandescent Lamps (Tungsten) >600V 60Hz 3phase, 347V 60Hz 1phase	5 kA
Special Purpose Ratings >Resistance Air Heating >480V 60Hz 3phase, 277V 60Hz 1phase	45 A
Special Purpose Ratings >Resistance Air Heating >600V 60Hz 3phase, 347V 60Hz 1phase	60 A
Special Purpose Ratings >Refrigeration Control (CSA only) >LRA 480V 60Hz 3phase	30/100 kA
Special Purpose Ratings >Refrigeration Control (CSA only) >FLA 480V 60Hz 3phase	25 Class RK5/20 Class J A
Special Purpose Ratings >Refrigeration Control (CSA only) >LRA 600V 60Hz 3phase	65 kA
Special Purpose Ratings >Refrigeration Control (CSA only) >FLA 600V 60Hz 3phase	16 A
Special Purpose Ratings >Definite Purpose Ratings (100,000 cycles acc. to UL 1995) >LRA 480V 60Hz 3phase	30/100 kA
Special Purpose Ratings >Definite Purpose Ratings (100,000 cycles acc. to UL 1995) >FLA 480V 60Hz 3phase	25 Class RK5/20 Class J A
Special Purpose Ratings >Elevator Control >200V 60Hz 3phase	12 A
Special Purpose Ratings >Elevator Control >200V 60Hz 3phase	12 A
Special Purpose Ratings >Elevator Control >240V 60Hz 3phase	14 A
Special Purpose Ratings >Elevator Control >240V 60Hz 3phase	14 A
Special Purpose Ratings >Elevator Control >480V 60Hz 3phase	12 A
Special Purpose Ratings >Elevator Control >480V 60Hz 3phase	12 A
Special Purpose Ratings >Elevator Control >600V 60Hz 3phase	60 A
Special Purpose Ratings >Elevator Control >600V 60Hz 3phase	10 A
Rated operational current for specified heat dissipation [In]	60 A
Heat dissipation per pole, current-dependent [Pvid]	10 A
Equipment heat dissipation, current-dependent [Pvid]	42 A
Static heat dissipation, non-current-dependent [Pvs]	7 A
Heat dissipation capacity [Pdiss]	0.75 HP
Operating ambient temperature min.	3.7 A
Operating ambient temperature max.	1.5 HP
10.2 Strength of materials and parts >10.2.2 Corrosion resistance	6 A
10.2 Strength of materials and parts >10.2.3.1 Verification of thermal stability of enclosures	2 HP
10.2 Strength of materials and parts >10.2.3.2 Verification of resistance of insulating materials to normal heat	3.4 A
10.2 Strength of materials and parts >10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects	3 HP
10.2 Strength of materials and parts >10.2.4 Resistance to ultra-violet (UV) radiation	3.9 A
10.2 Strength of materials and parts >10.2.5 Lifting
10.2 Strength of materials and parts >10.2.6 Mechanical impact	7 A
10.2 Strength of materials and parts >10.2.7 Inscriptions	0.1 W
10.3 Degree of protection of ASSEMBLIES	0 W
10.4 Clearances and creepage distances	1.4 W
10.5 Protection against electric shock	0 W
10.6 Incorporation of switching devices and components	-25 °C
10.7 Internal electrical circuits and connections	+60 °C
10.8 Connections for external conductors
10.9 Insulation properties >10.9.2 Power-frequency electric strength	Meets the product standard´s requirements.
10.9 Insulation properties >10.9.3 Impulse withstand voltage	Meets the product standard´s requirements.
10.9 Insulation properties >10.9.4 Testing of enclosures made of insulating material	Meets the product standard´s requirements.
10.10 Temperature rise	Meets the product standard´s requirements.
10.11 Short-circuit rating	Meets the product standard´s requirements.
10.12 Electromagnetic compatibility	Does not apply, since the entire switchgear needs to be evaluated.
10.13 Mechanical function	Does not apply, since the entire switchgear needs to be evaluated.
Rated control supply voltage Us at AC 50HZ	Meets the product standard´s requirements.
Rated control supply voltage Us at AC 60HZ	Does not apply, since the entire switchgear needs to be evaluated.
Rated control supply voltage Us at DC	Meets the product standard´s requirements.
Voltage type for actuating	Does not apply, since the entire switchgear needs to be evaluated.
Rated operation current Ie at AC-1, 400 V	Does not apply, since the entire switchgear needs to be evaluated.
Rated operation current Ie at AC-3, 400 V	Is the panel builder´s responsibility.
Rated operation power at AC-3, 400 V	Is the panel builder´s responsibility.
Rated operation current Ie at AC-4, 400 V	Is the panel builder´s responsibility.
Rated operation power at AC-4, 400 V	Is the panel builder´s responsibility.
Rated operation power NEMA	Is the panel builder´s responsibility.
Modular version	The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
Number of auxiliary contacts as normally open contact	Is the panel builder´s responsibility. The specifications for the switchgear must be observed.
Number of auxiliary contacts as normally closed contact	Is the panel builder´s responsibility. The specifications for the switchgear must be observed.
Type of electrical connection of main circuit	The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
Number of normally closed contacts as main contact
Number of main contacts as normally open contact
Product Standards	24 - 24 V
UL File No.	24 - 24 V
UL Category Control No.	0 - 0 V
CSA File No.	AC
CSA Class No.	22 A
North America Certification	7 A
Specially designed for North America	3 kW
Accessories	5 A
Characteristic curve	2.2 kW
Characteristic curve	2.2 kW
Characteristic curve	No

Mnelko olarak, endüstriyel otomasyon çözümlerinde güvenilir bir iş ortağı olarak, geniş ürün yelpazesi ile işletmenizin tüm ihtiyaçlarını karşılamaya yönelik kaliteli ve yenilikçi ürünler sunmaktayız. Ürün portföyümüz, modern endüstriyel süreçleri desteklemek amacıyla yüksek performans, dayanıklılık ve verimlilik ilkeleri doğrultusunda tasarlanmış çözümlerden oluşur.
Tüm ürünlerimiz, zorlu çalışma koşullarında dahi maksimum güvenilirlik sunar ve işletmenizin operasyonlarını sorunsuz şekilde sürdürmesine yardımcı olur. Endüstriyel otomasyon, enerji yönetimi, kablolama çözümleri ve daha birçok alanda sunduğumuz ürünler, farklı sektörlerdeki ihtiyaçlara esneklikle uyum sağlar.
Ayrıca, ürünlerimiz sadece kaliteli malzemelerle üretilmiş olup, uluslararası standartlara uygunluk göstermektedir. Müşterilerimize sunduğumuz çözümlerle, operasyonel verimliliklerini artırmalarına ve maliyetlerini optimize etmelerine olanak tanıyoruz. Teknolojik gelişmeleri yakından takip eden firmamız, sürekli olarak yenilikçi ürünler sunarak, müşterilerimizin rekabet avantajı elde etmesine destek vermektedir.
Her bir ürün sayfamızda, teknik detaylar, kullanım alanları ve ürün özelliklerine dair kapsamlı bilgilere ulaşabilirsiniz. Endüstriyel süreçlerinizi güçlendirmek için ihtiyacınız olan tüm ürünleri sitemizden keşfedebilir, sorunsuz bir satın alma deneyimi yaşayabilirsiniz.