DILM80(110V50HZ,120V60HZ)
239399 DILM80(110V50HZ,120V60HZ)
239399

Kontaktör, 3 kutuplu, 380 V 400 V 37 kW, 110 V 50 Hz, 120 V 60 Hz, AC çalışma, Vidalı terminaller
Kontaktör, Uygulama: Motorlar için Kontaktörler, 170 A'e kadar kontaktörler, 3 kutuplu, Kullanım kategorisi: AC-1: Endüktif olmayan veya hafif endüktif yükler, dirençli fırınlar, NAC-3: Normal AC endüksiyon motorları: başlatma, çalışma sırasında kapatma , AC-4: Normal AC endüksiyon motorları: başlatma, takma, ters çevirme, yavaş yavaş çalıştırma, Bağlantı tekniği: Vidalı terminaller, Notlar: IE3 verimlilik sınıfına sahip motorlar için de uygundur, IE3'e hazır cihazlar ambalajlarının üzerindeki logo ile tanımlanır., Kutup sayısı: 3 kutuplu, Nominal çalışma akımı AC-3 380 V 400 V: Ie= 80 A, Nominal çalışma akımı AC-1 Konvansiyonel serbest hava termal akımı, 3 kutuplu, 50 - 60 Hz 40 °C'de açık: Ith = Ie= 110 A, kapalı: Ith= 80 A, Nominal çalışma akımı AC-1 Konvansiyonel serbest hava termal akımı, 1 kutup açık: Ith= 225 A, kapalı: Ith= 200 A, Maks. üç fazlı motorlar için nominal değer, 50 - 60 Hz AC-3 220 V 230 V: P= 25 kW, 380 V 400 V: P= 37 kW, 660 V 690 V: P= 63 kW, Maks. üç fazlı motorlar için nominal değer, 50 - 60 Hz AC-4 220 V 230 V: P= 11,5 kW, 380 V 400 V: P= 20 kW, 660 V 690 V: P= 26 kW, Yardımcı kontakla birleştirilebilir : DILM150-XHI(V).., DILM1000-XHI(V).., Talimatlar: EN 50 012'ye göre kontaklar, Gerilim AC/DC: AC çalışması

Product range	Contactors
Application	Contactors for Motors
Subrange	Contactors up to 170 A, 3 pole
Utilization category	AC-1: Non-inductive or slightly inductive loads, resistance furnaces NAC-3: Normal AC induction motors: starting, switch off during running AC-4: Normal AC induction motors: starting, plugging, reversing, inching
Notes
Connection technique	Also suitable for motors with efficiency class IE3. IE3-ready devices are identified by the logo on their packaging.
Number of poles	Screw terminals
AC-3 >Notes	3 pole
AC-3 >380 V 400 V [Ie]
AC-1 >Conventional free air thermal current, 3 pole, 50 - 60 Hz >Open >at 40 °C [Ith =Ie]	At maximum permissible ambient temperature (open.)
AC-1 >Conventional free air thermal current, 3 pole, 50 - 60 Hz >enclosed [Ith ]	80 A
AC-1 >Conventional free air thermal current, 1 pole >open [Ith ]	110 A
AC-1 >Conventional free air thermal current, 1 pole >enclosed [Ith ]	80 A
AC-3 >220 V 230 V [P]	225 A
AC-3 >380 V 400 V [P]	200 A
AC-3 >660 V 690 V [P]
AC-4 >220 V 230 V [P]	25 kW
AC-4 >380 V 400 V [P]	37 kW
AC-4 >660 V 690 V [P]	63 kW
Contact sequence	11.5 kW
Instructions	20 kW
Can be combined with auxiliary contact	26 kW
Actuating voltage
Voltage AC/DC	Contacts to EN 50 012.
Connection to SmartWire-DT	DILM150-XHI(V)… DILM1000-XHI(V)…
Frame size	110 V 50 Hz, 120 V 60 Hz
Standards	AC operation
Lifespan, mechanical >AC operated [Operations]	no
Operating frequency, mechanical >AC operated [Operations/h]	4
Climatic proofing
Ambient temperature >Open	IEC/EN 60947, VDE 0660, UL, CSA
Ambient temperature >Enclosed	10 x 106
Ambient temperature >Storage	3600
Mounting position	Damp heat, constant, to IEC 60068-2-78 Damp heat, cyclic, to IEC 60068-2-30
Mechanical shock resistance (IEC/EN 60068-2-27) >Half-sinusoidal shock, 10 ms >Main contacts >N/O contact	-25 - +60 °C
Mechanical shock resistance (IEC/EN 60068-2-27) >Half-sinusoidal shock, 10 ms >Auxiliary contacts >N/O contact	- 25 - 40 °C
Mechanical shock resistance (IEC/EN 60068-2-27) >Half-sinusoidal shock, 10 ms >Auxiliary contacts >N/C contact	- 40 - 80 °C
Mechanical shock resistance (IEC/EN 60068-2-27) when tabletop-mounted >Half-sinusoidal shock, 10 ms >Main contacts >N/O contact
Mechanical shock resistance (IEC/EN 60068-2-27) when tabletop-mounted >Half-sinusoidal shock, 10 ms >Auxiliary contacts >N/O contact	10 g
Mechanical shock resistance (IEC/EN 60068-2-27) when tabletop-mounted >Half-sinusoidal shock, 10 ms >Auxiliary contacts >N/C contact	7 g
Degree of Protection	5 g
Protection against direct contact when actuated from front (EN 50274)	10 g
Altitude	7 g
Weight >AC operated	5 g
Screw connector terminals >Terminal capacity main cable >Flexible with ferrule	IP00
Screw connector terminals >Terminal capacity main cable >Stranded	Finger and back-of-hand proof
Screw connector terminals >Terminal capacity main cable >Solid or stranded	Max. 2000 m
Screw connector terminals >Terminal capacity main cable >Flat conductor [Lamellenzahl x Breite x Dicke ]	2.18 kg
Screw connector terminals >Terminal capacity main cable >Stripping length	1 x (10 - 70) 2 x (10 - 50) mm2
Screw connector terminals >Terminal capacity main cable >Terminal screw	1 x (16 - 70) 2 x (16 - 50) mm2
Screw connector terminals >Terminal capacity main cable >Tightening torque	single 8…3/0, double 8…2/0 AWG
Screw connector terminals >Terminal capacity main cable >Tool >Hexagon socket-head spanner [SW]	2 x (6 x 16 x 0.8) mm
Screw connector terminals >Terminal capacity control circuit cables >Solid	24 mm
Screw connector terminals >Terminal capacity control circuit cables >Flexible with ferrule	M10
Screw connector terminals >Terminal capacity control circuit cables >Solid or stranded	14 Nm
Screw connector terminals >Terminal capacity control circuit cables >Stripping length	5 mm
Screw connector terminals >Terminal capacity control circuit cables >Terminal screw	1 x (0.75 - 4) 2 x (0.75 - 2.5) mm2
Screw connector terminals >Terminal capacity control circuit cables >Tightening torque	1 x (0.75 - 2.5) 2 x (0.75 - 2.5) mm2
Screw connector terminals >Terminal capacity control circuit cables >Tool >Pozidriv screwdriver	18 - 14 AWG
Screw connector terminals >Terminal capacity control circuit cables >Tool >Standard screwdriver	10 mm
Rated impulse withstand voltage [Uimp]	M3.5
Overvoltage category/pollution degree	1.2 Nm
Rated insulation voltage [Ui]	2 Size
Rated operational voltage [Ue]	0.8 x 5.5 1 x 6 mm
Safe isolation to EN 61140 >between coil and contacts
Safe isolation to EN 61140 >between the contacts	8000 V AC
Making capacity (p.f. to IEC/EN 60947) [Up to 690 V]	III/3
Breaking capacity >220 V 230 V	690 V AC
Breaking capacity >380 V 400 V	690 V AC
Breaking capacity >500 V	690 V AC
Breaking capacity >660 V 690 V	690 V AC
Short-circuit rating >Short-circuit protection maximum fuse >Type “2” coordination >400 V [gG/gL 500 V]	1120 A
Short-circuit rating >Short-circuit protection maximum fuse >Type “2” coordination >690 V [gG/gL 690 V]	800 A
Short-circuit rating >Short-circuit protection maximum fuse >Type “1” coordination >400 V [gG/gL 500 V]	800 A
Short-circuit rating >Short-circuit protection maximum fuse >Type “1” coordination >690 V [gG/gL 690 V]	800 A
AC-1 >Rated operational current >Conventional free air thermal current, 3 pole, 50 - 60 Hz >Open >at 40 °C [Ith =Ie]	650 A
AC-1 >Rated operational current >Conventional free air thermal current, 3 pole, 50 - 60 Hz >Open >at 50 °C [Ith =Ie]	160 A
AC-1 >Rated operational current >Conventional free air thermal current, 3 pole, 50 - 60 Hz >Open >at 55 °C [Ith =Ie]	160 A
AC-1 >Rated operational current >Conventional free air thermal current, 3 pole, 50 - 60 Hz >Open >at 60 °C [Ith =Ie]	250 A
AC-1 >Rated operational current >Conventional free air thermal current, 3 pole, 50 - 60 Hz >enclosed [Ith ]	200 A
AC-1 >Rated operational current >Conventional free air thermal current, 1 pole >open [Ith ]
AC-1 >Rated operational current >Conventional free air thermal current, 1 pole >enclosed [Ith ]	110 A
AC-3 >Rated operational current >Open, 3-pole: 50 – 60 Hz >Notes	98 A
AC-3 >Rated operational current >Open, 3-pole: 50 – 60 Hz >220 V 230 V [Ie]	94 A
AC-3 >Rated operational current >Open, 3-pole: 50 – 60 Hz >240 V [Ie]	90 A
AC-3 >Rated operational current >Open, 3-pole: 50 – 60 Hz >380 V 400 V [Ie]	80 A
AC-3 >Rated operational current >Open, 3-pole: 50 – 60 Hz >415 V [Ie]	225 A
AC-3 >Rated operational current >Open, 3-pole: 50 – 60 Hz >440V [Ie]	200 A
AC-3 >Rated operational current >Open, 3-pole: 50 – 60 Hz >500 V [Ie]	At maximum permissible ambient temperature (open.)
AC-3 >Rated operational current >Open, 3-pole: 50 – 60 Hz >660 V 690 V [Ie]	80 A
AC-3 >Rated operational current >Open, 3-pole: 50 – 60 Hz >380 V 400 V [Ie]	80 A
AC-3 >Motor rating [P] >220 V 230 V [P]	80 A
AC-3 >Motor rating [P] >240V [P]	80 A
AC-3 >Motor rating [P] >380 V 400 V [P]	80 A
AC-3 >Motor rating [P] >415 V [P]	80 A
AC-3 >Motor rating [P] >440 V [P]	65 A
AC-3 >Motor rating [P] >500 V [P]	80 A
AC-3 >Motor rating [P] >660 V 690 V [P]	25 kW
AC-4 >Open, 3-pole: 50 – 60 Hz >220 V 230 V [Ie ]	27.5 kW
AC-4 >Open, 3-pole: 50 – 60 Hz >240 V [Ie ]	37 kW
AC-4 >Open, 3-pole: 50 – 60 Hz >380 V 400 V [Ie ]	48 kW
AC-4 >Open, 3-pole: 50 – 60 Hz >415 V [Ie ]	51 kW
AC-4 >Open, 3-pole: 50 – 60 Hz >440 V [Ie ]	58 kW
AC-4 >Open, 3-pole: 50 – 60 Hz >500 V [Ie ]	63 kW
AC-4 >Open, 3-pole: 50 – 60 Hz >660 V 690 V [Ie ]	40 A
AC-4 >Motor rating [P] >220 V 230 V [P]	40 A
AC-4 >Motor rating [P] >240 V [P]	40 A
AC-4 >Motor rating [P] >380 V 400 V [P]	40 A
AC-4 >Motor rating [P] >415 V [P]	40 A
AC-4 >Motor rating [P] >440 V [P]	40 A
AC-4 >Motor rating [P] >500 V [P]	27 A
AC-4 >Motor rating [P] >660 V 690 V [P]	11.5 kW
Rated operational current, open >DC-1 >60 V [Ie ]	13 kW
Rated operational current, open >DC-1 >110 V [Ie ]	20 kW
Rated operational current, open >DC-1 >220 V [Ie ]	24 kW
3 pole, at Ith (60°)	25 kW
Current heat loss at Ie to AC-3/400 V	29 kW
Impedance per pole	26 kW
Voltage tolerance >AC operated [Pick-up]
Voltage tolerance >Drop-out voltage AC operated [Drop-out]	110 A
Power consumption of the coil in a cold state and 1.0 x US >50 Hz [Pick-up]	110 A
Power consumption of the coil in a cold state and 1.0 x US >50 Hz [Sealing]	70 A
Power consumption of the coil in a cold state and 1.0 x US >50 Hz [Sealing]
Power consumption of the coil in a cold state and 1.0 x US >60 Hz [Pick-up]	11.4 W
Power consumption of the coil in a cold state and 1.0 x US >60 Hz [Sealing]	9 W
Power consumption of the coil in a cold state and 1.0 x US >60 Hz [Sealing]	0.6 mΩ
Duty factor
Changeover time at 100 % US (recommended value) >Main contacts >AC operated >Closing delay	0.8 - 1.1 x Uc
Changeover time at 100 % US (recommended value) >Main contacts >AC operated >Opening delay	0.3 - 0.6 x Uc
Changeover time at 100 % US (recommended value) >Arcing time	310 VA
Changeover time at 100 % US (recommended value) >Permissible residual current with actuation of A1 - A2 by the electronics (with 0 signal).	26 VA
Emitted interference	5.8 W
Interference immunity	345 VA
Switching capacity >Maximum motor rating >Three-phase >200 V 208 V	30 VA
Switching capacity >Maximum motor rating >Three-phase >230 V 240 V	5.8 W
Switching capacity >Maximum motor rating >Three-phase >460 V 480 V	100 % DF
Switching capacity >Maximum motor rating >Three-phase >575 V 600 V	14 - 20 ms
Switching capacity >Maximum motor rating >Single-phase >115 V 120 V	9 - 14 ms
Switching capacity >Maximum motor rating >Single-phase >230 V 240 V	15 ms
Switching capacity >General use	≦ 1 mA
Short Circuit Current Rating >Basic Rating >SCCR
Short Circuit Current Rating >Basic Rating >max. Fuse	to EN 60947-1
Short Circuit Current Rating >Basic Rating >max. CB	to EN 60947-1
Short Circuit Current Rating >480 V High Fault >SCCR (fuse)
Short Circuit Current Rating >480 V High Fault >max. Fuse	25 HP
Short Circuit Current Rating >480 V High Fault >SCCR (CB)	30 HP
Short Circuit Current Rating >480 V High Fault >max. CB	60 HP
Short Circuit Current Rating >600 V High Fault >SCCR (fuse)	75 HP
Short Circuit Current Rating >600 V High Fault >max. Fuse	7.5 HP
Short Circuit Current Rating >600 V High Fault >SCCR (CB)	15 HP
Short Circuit Current Rating >600 V High Fault >max. CB	125 A
Special Purpose Ratings >Electrical Discharge Lamps (Ballast) >480V 60Hz 3phase, 277V 60Hz 1phase	10 kA
Special Purpose Ratings >Electrical Discharge Lamps (Ballast) >600V 60Hz 3phase, 347V 60Hz 1phase	600 A
Special Purpose Ratings >Incandescent Lamps (Tungsten) >480V 60Hz 3phase, 277V 60Hz 1phase	600 A
Special Purpose Ratings >Incandescent Lamps (Tungsten) >600V 60Hz 3phase, 347V 60Hz 1phase	30/100 kA
Special Purpose Ratings >Resistance Air Heating >480V 60Hz 3phase, 277V 60Hz 1phase	300/300 Class J A
Special Purpose Ratings >Resistance Air Heating >600V 60Hz 3phase, 347V 60Hz 1phase	65 kA
Special Purpose Ratings >Refrigeration Control (CSA only) >LRA 480V 60Hz 3phase	250 A
Special Purpose Ratings >Refrigeration Control (CSA only) >FLA 480V 60Hz 3phase	30/100 kA
Special Purpose Ratings >Refrigeration Control (CSA only) >LRA 600V 60Hz 3phase	300/300 Class J A
Special Purpose Ratings >Refrigeration Control (CSA only) >FLA 600V 60Hz 3phase	30 kA
Special Purpose Ratings >Definite Purpose Ratings (100,000 cycles acc. to UL 1995) >LRA 480V 60Hz 3phase	350 A
Special Purpose Ratings >Definite Purpose Ratings (100,000 cycles acc. to UL 1995) >FLA 480V 60Hz 3phase	100 A
Special Purpose Ratings >Elevator Control >200V 60Hz 3phase	100 A
Special Purpose Ratings >Elevator Control >200V 60Hz 3phase	100 A
Special Purpose Ratings >Elevator Control >240V 60Hz 3phase	100 A
Special Purpose Ratings >Elevator Control >240V 60Hz 3phase	100 A
Special Purpose Ratings >Elevator Control >480V 60Hz 3phase	100 A
Special Purpose Ratings >Elevator Control >480V 60Hz 3phase	540 A
Special Purpose Ratings >Elevator Control >600V 60Hz 3phase	90 A
Special Purpose Ratings >Elevator Control >600V 60Hz 3phase	420 A
Rated operational current for specified heat dissipation [In]	70 A
Heat dissipation per pole, current-dependent [Pvid]	480 A
Equipment heat dissipation, current-dependent [Pvid]	80 A
Static heat dissipation, non-current-dependent [Pvs]	20 HP
Heat dissipation capacity [Pdiss]	62.1 A
Operating ambient temperature min.	25 HP
Operating ambient temperature max.	68 A
10.2 Strength of materials and parts >10.2.2 Corrosion resistance	50 HP
10.2 Strength of materials and parts >10.2.3.1 Verification of thermal stability of enclosures	65 A
10.2 Strength of materials and parts >10.2.3.2 Verification of resistance of insulating materials to normal heat	60 HP
10.2 Strength of materials and parts >10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects	62 A
10.2 Strength of materials and parts >10.2.4 Resistance to ultra-violet (UV) radiation
10.2 Strength of materials and parts >10.2.5 Lifting	80 A
10.2 Strength of materials and parts >10.2.6 Mechanical impact	3 W
10.2 Strength of materials and parts >10.2.7 Inscriptions	9 W
10.3 Degree of protection of ASSEMBLIES	5.8 W
10.4 Clearances and creepage distances	0 W
10.5 Protection against electric shock	-25 °C
10.6 Incorporation of switching devices and components	+60 °C
10.7 Internal electrical circuits and connections
10.8 Connections for external conductors	Meets the product standard´s requirements.
10.9 Insulation properties >10.9.2 Power-frequency electric strength	Meets the product standard´s requirements.
10.9 Insulation properties >10.9.3 Impulse withstand voltage	Meets the product standard´s requirements.
10.9 Insulation properties >10.9.4 Testing of enclosures made of insulating material	Meets the product standard´s requirements.
10.10 Temperature rise	Meets the product standard´s requirements.
10.11 Short-circuit rating	Does not apply, since the entire switchgear needs to be evaluated.
10.12 Electromagnetic compatibility	Does not apply, since the entire switchgear needs to be evaluated.
10.13 Mechanical function	Meets the product standard´s requirements.
Rated control supply voltage Us at AC 50HZ	Does not apply, since the entire switchgear needs to be evaluated.
Rated control supply voltage Us at AC 60HZ	Meets the product standard´s requirements.
Rated control supply voltage Us at DC	Does not apply, since the entire switchgear needs to be evaluated.
Voltage type for actuating	Does not apply, since the entire switchgear needs to be evaluated.
Rated operation current Ie at AC-1, 400 V	Is the panel builder´s responsibility.
Rated operation current Ie at AC-3, 400 V	Is the panel builder´s responsibility.
Rated operation power at AC-3, 400 V	Is the panel builder´s responsibility.
Rated operation current Ie at AC-4, 400 V	Is the panel builder´s responsibility.
Rated operation power at AC-4, 400 V	Is the panel builder´s responsibility.
Rated operation power NEMA	The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
Modular version	Is the panel builder´s responsibility. The specifications for the switchgear must be observed.
Number of auxiliary contacts as normally open contact	Is the panel builder´s responsibility. The specifications for the switchgear must be observed.
Number of auxiliary contacts as normally closed contact	The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
Type of electrical connection of main circuit
Number of normally closed contacts as main contact
Number of main contacts as normally open contact	110 - 110 V
Product Standards	120 - 120 V
UL File No.	0 - 0 V
UL Category Control No.	AC
CSA File No.	110 A
CSA Class No.	80 A
North America Certification	37 kW
Specially designed for North America	40 A
Accessories	20 kW
Side mounting auxiliary contacts	44.7 kW
possible variants at auxiliary contact module fitting options	No
Characteristic curve	0
Characteristic curve	0
Characteristic curve	Screw connection

Mnelko olarak, endüstriyel otomasyon çözümlerinde güvenilir bir iş ortağı olarak, geniş ürün yelpazesi ile işletmenizin tüm ihtiyaçlarını karşılamaya yönelik kaliteli ve yenilikçi ürünler sunmaktayız. Ürün portföyümüz, modern endüstriyel süreçleri desteklemek amacıyla yüksek performans, dayanıklılık ve verimlilik ilkeleri doğrultusunda tasarlanmış çözümlerden oluşur.
Tüm ürünlerimiz, zorlu çalışma koşullarında dahi maksimum güvenilirlik sunar ve işletmenizin operasyonlarını sorunsuz şekilde sürdürmesine yardımcı olur. Endüstriyel otomasyon, enerji yönetimi, kablolama çözümleri ve daha birçok alanda sunduğumuz ürünler, farklı sektörlerdeki ihtiyaçlara esneklikle uyum sağlar.
Ayrıca, ürünlerimiz sadece kaliteli malzemelerle üretilmiş olup, uluslararası standartlara uygunluk göstermektedir. Müşterilerimize sunduğumuz çözümlerle, operasyonel verimliliklerini artırmalarına ve maliyetlerini optimize etmelerine olanak tanıyoruz. Teknolojik gelişmeleri yakından takip eden firmamız, sürekli olarak yenilikçi ürünler sunarak, müşterilerimizin rekabet avantajı elde etmesine destek vermektedir.
Her bir ürün sayfamızda, teknik detaylar, kullanım alanları ve ürün özelliklerine dair kapsamlı bilgilere ulaşabilirsiniz. Endüstriyel süreçlerinizi güçlendirmek için ihtiyacınız olan tüm ürünleri sitemizden keşfedebilir, sorunsuz bir satın alma deneyimi yaşayabilirsiniz.