DILM32-XHIC11
277751 DILM32-XHIC11
277751

Yardımcı kontak modülü, 2 kutuplu, Ith= 16 A, 1 N/O, 1 NC, Önden sabitleme, Yaylı terminaller, DILM7-10 - DILM38-10
Yardımcı kontak modülü, kilitli karşılıklı kontaklarla, Fonksiyon: standart uygulamalar için, 2 kutuplu, Bağlantı tekniği: Yaylı terminaller, Nominal çalışma akımı AC-15 220 V 230 V 240 V: Ie= 4 A, Nominal çalışma akımı AC-15 380 V 400 V 415 V: Ie= 4 A, Kontaklar N/O = Normalde açık: 1 N/O, Kontaklar N/C = Normalde kapalı: 1 NC, Montaj tipi: Önden sabitleme, Şunlarla kullanım için: DILM(C) 7-10…, DILM(C)9-10…, DILM(C)12-10…, DILM(C)15-10…, DILM(C)17-10…, DILM(C)25-10…, DILM(C)32-10…, DILM38-10…, DILMP20…, DILMP32-10…, DILMP45-10…, DILL…, DILMF8-10…, DILMF11-10…, DILMF14-10…, DILMF17-10…, DILMF25-10…, DILMF32-10…, Tip: Önden montajlı yardımcı kontak, Talimatlar: IEC/EN 60947-5-1 ek L'ye göre kilitli karşılıklı kontaklar, yardımcı kontak modüllerinin içinde, ayrıca DILM'in entegre yardımcı kontakları için 7 - DILM32, IEC/EN 60947-4-1 Ek F'ye göre ayna kontakları olarak kullanılan yardımcı kontaklar (N/C geç açık değil)

Accessories	Auxiliary contact modules
Description	with interlocked opposing contacts
Function	for standard applications
Number of poles	2 pole
Connection technique	Spring-loaded terminals
Conventional free air thermal current, 1 pole >Open >at 60 °C [Ith]
AC-15 >220 V 230 V 240 V [Ie]	16 A
AC-15 >380 V 400 V 415 V [Ie]	4 A
N/O = Normally open	4 A
N/C = Normally closed
Mounting type	1 N/O
Contact sequence	1 NC
For use with	Front fixing
Type
Instructions	DILM(C)7-10… DILM(C)9-10… DILM(C)12-10… DILM(C)15-10… DILM(C)17-10… DILM(C)25-10… DILM(C)32-10… DILM38-10… DILMP20… DILMP32-10… DILMP45-10… DILL… DILMF8-10… DILMF11-10… DILMF14-10… DILMF17-10… DILMF25-10… DILMF32-10…
Standards	Front mounting auxiliary contact
Component lifespan >at Ue = 230 V, AC-15, 3 A [Operations]	Interlocked opposing contacts according to IEC/EN 60947-5-1 appendix L, inside the auxiliary contact modules, also for the integrated auxiliary contacts of the DILM 7 - DILM32 Auxiliary contacts used as mirror contacts according to IEC/EN 60947-4-1 Appendix F (not N/C late open)
Climatic proofing
Ambient temperature >Open	IEC/EN 60947, VDE 0660, UL, CSA
Ambient temperature >Enclosed	1.3 x 106
Ambient temperature >Ambient temperature, storage	Damp heat, constant, to IEC 60068-2-78 Damp heat, cyclic, to IEC 60068-2-30
Mechanical shock resistance (IEC/EN 60068-2-27) >Half-sinusoidal shock, 10 ms >Basic unit with auxiliary contact module >N/O contact	-25 - +60 °C
Mechanical shock resistance (IEC/EN 60068-2-27) >Half-sinusoidal shock, 10 ms >Basic unit with auxiliary contact module >N/C contact	- 25 - 40 °C
Degree of Protection	- 40 - 80 °C
Protection against direct contact when actuated from front (EN 50274)	7 g
Weight	5 g
Terminal capacities >Spring-loaded terminals >Flexible with ferrule	IP20
Terminal capacities >Spring-loaded terminals >Solid or stranded	Finger and back-of-hand proof
Terminal capacities >Spring-loaded terminals >Standard screwdriver	0.043 kg
Interlocked opposing contacts within an auxiliary contact module (to IEC 60947-5-1 Annex L)	1 x (0.75 - 1.5) 2 x (0.75 - 1.5) mm2
N/C contact (not late-break contact) suitable as a mirror contact (to IEC/EN 60947-4-1 Annex F)	18 – 14 AWG
Rated impulse withstand voltage [Uimp]	0.6 x 3.5 mm
Overvoltage category/pollution degree
Rated insulation voltage [Ui]	Yes
Rated operational voltage [Ue]	DILM7 - DILM38
Safe isolation to EN 61140 >between coil and auxiliary contacts	6000 V AC
Safe isolation to EN 61140 >between the auxiliary contacts	III/3
Rated operational current >Conventional free air thermal current, 1 pole >at 60 °C [Ith]	690 V AC
Rated operational current >AC-15 >220 V 230 V 240 V [Ie]	500 V AC
Rated operational current >AC-15 >380 V 400 V 415 V [Ie]	400 V AC
Rated operational current >AC-15 >500 V [Ie]	400 V AC
Rated operational current >DC current	16 A
Rated operational current >DC current >DC L/R ≦ 15 ms >Contacts in series: >1 [24 V]	4 A
Rated operational current >DC current >DC L/R ≦ 15 ms >Contacts in series: >1 [60 V]	4 A
Rated operational current >DC current >DC L/R ≦ 15 ms >Contacts in series: >1 [110 V]	1.5 A
Rated operational current >DC current >DC L/R ≦ 15 ms >Contacts in series: >1 [220 V]	Switch-on and switch-off conditions based on DC-13, time constant as specified.
Rated operational current >DC current >DC-13 (6xP) >24 V [Ie ]	10 A
Rated operational current >DC current >DC-13 (6xP) >60 V [Ie ]	6 A
Rated operational current >DC current >DC-13 (6xP) >110 V [Ie ]	3 A
Rated operational current >DC current >DC-13 (6xP) >220 V [Ie ]	1 A
Rated operational current >Control circuit reliability [Failure rate]	2.5 A
Short-circuit rating without welding >Short-circuit protection maximum fuse >500 V	1 A
Current heat loss at Ith >AC operated	0.5 A
Current heat loss at Ith >DC operated	0.25 A
Current heat loss at Ith >Current heat loss per auxiliary circuit at Ie (AC-15/230 V)	<10-8, < one failure at 100 million operations (at Ue = 24 V DC, Umin = 17 V, Imin = 5.4 mA) λ
Auxiliary contacts >Pilot Duty >AC operated	10 A gG/gL
Auxiliary contacts >Pilot Duty >DC operated	2.6 W
Auxiliary contacts >General Use >AC	2.6 W
Auxiliary contacts >General Use >AC	0.16 CO
Auxiliary contacts >General Use >DC
Auxiliary contacts >General Use >DC	A600
Rated operational current for specified heat dissipation [In]	P300
Heat dissipation per pole, current-dependent [Pvid]	600 V
Equipment heat dissipation, current-dependent [Pvid]	10 A
Static heat dissipation, non-current-dependent [Pvs]	250 V
Heat dissipation capacity [Pdiss]	1 A
Operating ambient temperature min.
Operating ambient temperature max.	4 A
10.2 Strength of materials and parts >10.2.2 Corrosion resistance	0.16 W
10.2 Strength of materials and parts >10.2.3.1 Verification of thermal stability of enclosures	0 W
10.2 Strength of materials and parts >10.2.3.2 Verification of resistance of insulating materials to normal heat	0 W
10.2 Strength of materials and parts >10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects	0 W
10.2 Strength of materials and parts >10.2.4 Resistance to ultra-violet (UV) radiation	-25 °C
10.2 Strength of materials and parts >10.2.5 Lifting	+60 °C
10.2 Strength of materials and parts >10.2.6 Mechanical impact
10.2 Strength of materials and parts >10.2.7 Inscriptions	Meets the product standard´s requirements.
10.3 Degree of protection of ASSEMBLIES	Meets the product standard´s requirements.
10.4 Clearances and creepage distances	Meets the product standard´s requirements.
10.5 Protection against electric shock	Meets the product standard´s requirements.
10.6 Incorporation of switching devices and components	Meets the product standard´s requirements.
10.7 Internal electrical circuits and connections	Does not apply, since the entire switchgear needs to be evaluated.
10.8 Connections for external conductors	Does not apply, since the entire switchgear needs to be evaluated.
10.9 Insulation properties >10.9.2 Power-frequency electric strength	Meets the product standard´s requirements.
10.9 Insulation properties >10.9.3 Impulse withstand voltage	Does not apply, since the entire switchgear needs to be evaluated.
10.9 Insulation properties >10.9.4 Testing of enclosures made of insulating material	Meets the product standard´s requirements.
10.10 Temperature rise	Does not apply, since the entire switchgear needs to be evaluated.
10.11 Short-circuit rating	Does not apply, since the entire switchgear needs to be evaluated.
10.12 Electromagnetic compatibility	Is the panel builder´s responsibility.
10.13 Mechanical function	Is the panel builder´s responsibility.
Number of contacts as change-over contact	Is the panel builder´s responsibility.
Number of contacts as normally open contact	Is the panel builder´s responsibility.
Number of contacts as normally closed contact	Is the panel builder´s responsibility.
Number of fault-signal switches	The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
Rated operation current Ie at AC-15, 230 V	Is the panel builder´s responsibility. The specifications for the switchgear must be observed.
Type of electric connection	Is the panel builder´s responsibility. The specifications for the switchgear must be observed.
Model	The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
Mounting method
Lamp holder
Product Standards	0
UL File No.	1
UL Category Control No.	1
CSA File No.	0
CSA Class No.	6 A
North America Certification	Spring clamp connection
Specially designed for North America	Top mounting

Mnelko olarak, endüstriyel otomasyon çözümlerinde güvenilir bir iş ortağı olarak, geniş ürün yelpazesi ile işletmenizin tüm ihtiyaçlarını karşılamaya yönelik kaliteli ve yenilikçi ürünler sunmaktayız. Ürün portföyümüz, modern endüstriyel süreçleri desteklemek amacıyla yüksek performans, dayanıklılık ve verimlilik ilkeleri doğrultusunda tasarlanmış çözümlerden oluşur.
Tüm ürünlerimiz, zorlu çalışma koşullarında dahi maksimum güvenilirlik sunar ve işletmenizin operasyonlarını sorunsuz şekilde sürdürmesine yardımcı olur. Endüstriyel otomasyon, enerji yönetimi, kablolama çözümleri ve daha birçok alanda sunduğumuz ürünler, farklı sektörlerdeki ihtiyaçlara esneklikle uyum sağlar.
Ayrıca, ürünlerimiz sadece kaliteli malzemelerle üretilmiş olup, uluslararası standartlara uygunluk göstermektedir. Müşterilerimize sunduğumuz çözümlerle, operasyonel verimliliklerini artırmalarına ve maliyetlerini optimize etmelerine olanak tanıyoruz. Teknolojik gelişmeleri yakından takip eden firmamız, sürekli olarak yenilikçi ürünler sunarak, müşterilerimizin rekabet avantajı elde etmesine destek vermektedir.
Her bir ürün sayfamızda, teknik detaylar, kullanım alanları ve ürün özelliklerine dair kapsamlı bilgilere ulaşabilirsiniz. Endüstriyel süreçlerinizi güçlendirmek için ihtiyacınız olan tüm ürünleri sitemizden keşfedebilir, sorunsuz bir satın alma deneyimi yaşayabilirsiniz.