DILM1600/22(RAW250)
106727 DILM1600/22(RAW250)
106727

Kontaktör, 380 V 400 V 900 kW, 2 N/A, 2 NC, RAW 250, AC çalışma, Vidalı bağlantı
Kontaktör, Uygulama: Motorlar için Kontaktörler, 170 A'dan büyük konfor cihazları, Kullanım kategorisi: AC-1: Endüktif olmayan veya hafif endüktif yükler, dirençli fırınlar, NAC-3: Normal AC endüksiyon motorları: başlatma, çalışma sırasında kapatma, AC -4: Normal AC endüksiyon motorları: başlatma, takma, ters çevirme, darbeli yol verme, Bağlantı tekniği: Vidalı bağlantı, Nominal çalışma akımı AC-3 380 V 400 V: Ie= 1600 A, Nominal çalışma akımı AC-1 Konvansiyonel serbest hava termal akımı, 3 kutuplu, 50 - 60 Hz 40 °C'de açık: Ith =Ie= 2200 A, Nominal çalışma akımı AC-1 Konvansiyonel serbest hava termal akımı, 1 kutup açık: Ith= 4500 A, Maks. üç fazlı motorlar için nominal değer, 50 - 60 Hz AC-3 220 V 230 V: P= 500 kW, 380 V 400 V: P= 900 kW, 660 V 690 V: P= 1600 kW, Maks. üç fazlı motorlar için nominal değer, 50 - 60 Hz AC-4 220 V 230 V: P= 430 kW, 380 V 400 V: P= 750 kW, 660 V 690 V: P= 1300 kW, Yardımcı kontakla birleştirilebilir : DILM820-XHI…, Kontaklar N/O = Normalde açık: 2 N/O, Kontaklar N/C = Normalde kapalı: 2 NC, Talimatlar: çalıştırma elektroniğinde entegre baskılayıcı devre, 660 V, 690 V veya 1000 V: doğrudan değil ters çevirme, Gerilim AC/DC: AC işlemi

Product range	Contactors
Application	Contactors for Motors
Subrange	Comfort devices greater than 170 A
Utilization category	AC-1: Non-inductive or slightly inductive loads, resistance furnaces NAC-3: Normal AC induction motors: starting, switch off during running AC-4: Normal AC induction motors: starting, plugging, reversing, inching
Connection technique	Screw connection
AC-3 >380 V 400 V [Ie]
AC-1 >Conventional free air thermal current, 3 pole, 50 - 60 Hz >Open >at 40 °C [Ith =Ie]	1600 A
AC-1 >Conventional free air thermal current, 1 pole >open [Ith ]	2200 A
AC-3 >220 V 230 V [P]	4500 A
AC-3 >380 V 400 V [P]
AC-3 >660 V 690 V [P]	500 kW
AC-3 >1000 V [P]	900 kW
AC-4 >220 V 230 V [P]	1600 kW
AC-4 >380 V 400 V [P]	1770 kW
AC-4 >660 V 690 V [P]	430 kW
AC-4 >1000 V [P]	750 kW
Contact sequence	1300 kW
Can be combined with auxiliary contact	1650 kW
Actuating voltage
Voltage AC/DC	DILM820-XHI…
N/O = Normally open	RAW 250
N/C = Normally closed	AC operation
possible variants at auxiliary contact module fitting options
Side mounting auxiliary contacts	2 N/O
Instructions	2 NC
Instructions
Notes	on the side: 2 x DILM820-XHI11(V)-SI; 2 x DILM820-XHI11-SA
Standards
Lifespan, mechanical >AC operated [Operations]	Interlocked opposing contacts according to IEC/EN 60947-5-1 Appendix L, inside the auxiliary contact module Auxiliary contacts used as mirror contacts according to IEC/EN 60947-4-1 Appendix F (not N/C late open)
Lifespan, mechanical >DC operated [Operations]	integrated suppressor circuit in actuating electronics 660 V, 690 V or 1000 V: not directly reversing
Operating frequency, mechanical >AC operated [Operations/h]	Classic   DILM1600, DILH2000, DILH2200   A1/A2 werden wie bisher gewohnt an Spannung gelegt     Direct from the PLC       An die Anschlüsse A3/A4 kann direkt ein 24-V-Ausgang der SPS angeschlossen werden.     From a low-power actuating device   Gering belastbare Befehlsgeber wie Leiterplattenrelais, Befehlsgeräte oder Positionsschalter können direkt an A10/A11 angeschlossen werden.         ① Stopping in the event of an emergency (emergency switching off) ② max. Cable capacitance 6 nF
Operating frequency, mechanical >DC operated [Operations/h]
Climatic proofing	IEC/EN 60947, VDE 0660, UL, CSA
Ambient temperature >Open	5 x 106
Ambient temperature >Storage	5 x 106
Mounting position	1000
Mechanical shock resistance (IEC/EN 60068-2-27) >Half-sinusoidal shock, 10 ms >Main contacts >N/O contact	1000
Mechanical shock resistance (IEC/EN 60068-2-27) >Half-sinusoidal shock, 10 ms >Auxiliary contacts >N/O contact	Damp heat, constant, to IEC 60068-2-78 Damp heat, cyclic, to IEC 60068-2-30
Mechanical shock resistance (IEC/EN 60068-2-27) >Half-sinusoidal shock, 10 ms >Auxiliary contacts >N/C contact	-40 - +60 °C
Degree of Protection	- 40 - + 80 °C
Altitude
Weight >AC operated	10 g
Weight >DC operated	10 g
Weight >Weight	8 g
Terminal capacity main cable >Busbar [Width]	IP00
Main cable connection screw/bolt	Max. 2000 m
Tightening torque	32 kg
Terminal capacity control circuit cables >Solid	32 kg
Terminal capacity control circuit cables >Flexible with ferrule	32 kg
Terminal capacity control circuit cables >Solid or stranded	100 mm
Control circuit cable connection screw/bolt	M12
Tightening torque	35 Nm
Tool >Main cable >Width across flats	1 x (0.75 - 2.5) 2 x (0.75 - 2.5) mm2
Tool >Control circuit cables >Pozidriv screwdriver	1 x (0.75 - 2.5) 2 x (0.75 - 2.5) mm2
Rated impulse withstand voltage [Uimp]	18 - 14 AWG
Overvoltage category/pollution degree	M3.5
Rated insulation voltage [Ui]	1.2 Nm
Rated operational voltage [Ue]	18 mm
Safe isolation to EN 61140 >between coil and contacts	2 Size
Safe isolation to EN 61140 >between the contacts
Making capacity (p.f. to IEC/EN 60947)	8000 V AC
Breaking capacity >220 V 230 V	III/3
Breaking capacity >380 V 400 V	1000 V AC
Breaking capacity >500 V	1000 V AC
Breaking capacity >660 V 690 V	500 V AC
Breaking capacity >1000 V	500 V AC
Component lifespan	19000 A
AC-1 >Rated operational current >Conventional free air thermal current, 3 pole, 50 - 60 Hz >Open >at 40 °C [Ith =Ie]	16000 A
AC-1 >Rated operational current >Conventional free air thermal current, 3 pole, 50 - 60 Hz >Open >at 50 °C [Ith =Ie]	16000 A
AC-1 >Rated operational current >Conventional free air thermal current, 3 pole, 50 - 60 Hz >Open >at 55 °C [Ith =Ie]	16000 A
AC-1 >Rated operational current >Conventional free air thermal current, 3 pole, 50 - 60 Hz >Open >at 60 °C [Ith =Ie]	16000 A
AC-1 >Rated operational current >Conventional free air thermal current, 1 pole >Note	5800 A
AC-1 >Rated operational current >Conventional free air thermal current, 1 pole >open [Ith ]	AC1: See → Engineering, characteristic curves AC3: See → Engineering, characteristic curves AC4: See → Engineering, characteristic curves
AC-3 >Rated operational current >Open, 3-pole: 50 – 60 Hz >Notes
AC-3 >Rated operational current >Open, 3-pole: 50 – 60 Hz >220 V 230 V [Ie]	2200 A
AC-3 >Rated operational current >Open, 3-pole: 50 – 60 Hz >240 V [Ie]	1970 A
AC-3 >Rated operational current >Open, 3-pole: 50 – 60 Hz >380 V 400 V [Ie]	1880 A
AC-3 >Rated operational current >Open, 3-pole: 50 – 60 Hz >415 V [Ie]	1800 A
AC-3 >Rated operational current >Open, 3-pole: 50 – 60 Hz >440V [Ie]	at maximum permissible ambient air temperature
AC-3 >Rated operational current >Open, 3-pole: 50 – 60 Hz >500 V [Ie]	4500 A
AC-3 >Rated operational current >Open, 3-pole: 50 – 60 Hz >660 V 690 V [Ie]	At maximum permissible ambient temperature (open.)
AC-3 >Rated operational current >Open, 3-pole: 50 – 60 Hz >1000 V [Ie ]	1600 A
AC-3 >Motor rating [P] >220 V 230 V [P]	1600 A
AC-3 >Motor rating [P] >240V [P]	1600 A
AC-3 >Motor rating [P] >380 V 400 V [P]	1600 A
AC-3 >Motor rating [P] >415 V [P]	1600 A
AC-3 >Motor rating [P] >440 V [P]	1600 A
AC-3 >Motor rating [P] >500 V [P]	1600 A
AC-3 >Motor rating [P] >660 V 690 V [P]	1200 A
AC-3 >Motor rating [P] >1000 V [P]	500 kW
AC-4 >Rated operational current >Open, 3-pole: 50 – 60 Hz >220 V 230 V [Ie ]	550 kW
AC-4 >Rated operational current >Open, 3-pole: 50 – 60 Hz >240 V [Ie ]	900 kW
AC-4 >Rated operational current >Open, 3-pole: 50 – 60 Hz >380 V 400 V [Ie ]	930 kW
AC-4 >Rated operational current >Open, 3-pole: 50 – 60 Hz >415 V [Ie ]	1000 kW
AC-4 >Rated operational current >Open, 3-pole: 50 – 60 Hz >440 V [Ie ]	1180 kW
AC-4 >Rated operational current >Open, 3-pole: 50 – 60 Hz >500 V [Ie ]	1600 kW
AC-4 >Rated operational current >Open, 3-pole: 50 – 60 Hz >660 V 690 V [Ie ]	1770 kW
AC-4 >Rated operational current >Open, 3-pole: 50 – 60 Hz >1000 V [Ie ]	1280 A
AC-4 >Motor rating [P] >220 V 230 V [P]	1280 A
AC-4 >Motor rating [P] >240 V [P]	1280 A
AC-4 >Motor rating [P] >380 V 400 V [P]	1280 A
AC-4 >Motor rating [P] >415 V [P]	1280 A
AC-4 >Motor rating [P] >440 V [P]	1280 A
AC-4 >Motor rating [P] >500 V [P]	1280 A
AC-4 >Motor rating [P] >660 V 690 V [P]	1120 A
AC-4 >Motor rating [P] >1000 V [P]	430 kW
3 pole, at Ith (60°)	450 kW
Current heat loss at Ie to AC-3/400 V	750 kW
Voltage tolerance >US	770 kW
Voltage tolerance >AC operated [Pick-up]	830 kW
Voltage tolerance >DC operated [Pick-up]	940 kW
Voltage tolerance >AC operated [Drop-out]	1300 kW
Voltage tolerance >DC operated [Drop-out]	1650 kW
Power consumption of the coil in a cold state and 1.0 x US >Note on power consumption
Power consumption of the coil in a cold state and 1.0 x US >Pull-in power [Pick-up]	155 W
Power consumption of the coil in a cold state and 1.0 x US >Pull-in power [Pick-up]	123 W
Power consumption of the coil in a cold state and 1.0 x US >Sealing power [Sealing]
Power consumption of the coil in a cold state and 1.0 x US >Sealing power [Sealing]	230 - 250 V 50/60 Hz 110 - 350 V DC
Duty factor	0.7 x US min - 1.15 x US max
Changeover time at 100 % US (recommended value) >Main contacts >Closing delay	0.7 x US min - 1.15 x US max
Changeover time at 100 % US (recommended value) >Main contacts >Opening delay	0.2 x US max - 0.6 x US min
Behaviour in marginal and transitional conditions >Sealing >Voltage interruptions >(0 … 0.2 x Uc min) ≦ 10 ms	0.2 x US max - 0.6 x US min
Behaviour in marginal and transitional conditions >Sealing >Voltage interruptions >(0 … 0.2 x Uc min) > 10 ms	Control transformer with uk ≦ 7%
Behaviour in marginal and transitional conditions >Sealing >Voltage drops >(0.2 … 0.6 x Uc min) ≦ 12 ms	1600 VA
Behaviour in marginal and transitional conditions >Sealing >Voltage drops >(0.2 … 0.6 x Uc min) > 12 ms	1400 W
Behaviour in marginal and transitional conditions >Sealing >Voltage drops >(0.6 … 0.7 x Uc min)	36.5 VA
Behaviour in marginal and transitional conditions >Sealing >Excess voltage >(1.15 … 1.3 x Uc max)	17.3 W
Behaviour in marginal and transitional conditions >Sealing >Pick-up phase >(0 … 0.7 x Uc min)	100 % DF
Behaviour in marginal and transitional conditions >Sealing >Pick-up phase >(0.7 x Uc min … 1.15 x Uc max)	70 ms
Admissible transitional contact resistance (of the external control circuit device when actuating A11)	40 ms
PLC signal level (A3 - A4) to IEC/EN 61131-2 (type 2) >High	Time is bridged successfully
PLC signal level (A3 - A4) to IEC/EN 61131-2 (type 2) >Low	Drop-out of the contactor
Electromagnetic compatibility	Time is bridged successfully
Switching capacity >Maximum motor rating >Three-phase >200 V 208 V	Drop-out of the contactor
Switching capacity >Maximum motor rating >Three-phase >230 V 240 V	Contactor remains switched on
Switching capacity >Maximum motor rating >Three-phase >460 V 480 V	Contactor remains switched on
Switching capacity >Maximum motor rating >Three-phase >575 V 600 V	Contactor does not switch on
Switching capacity >General use	Contactor switches on with certainty
Auxiliary contacts >Pilot Duty >AC operated	≦ 500 mΩ
Auxiliary contacts >Pilot Duty >DC operated	15 V
Auxiliary contacts >General Use >AC	5 V
Auxiliary contacts >General Use >AC
Auxiliary contacts >General Use >DC	This product is designed for operation in industrial environments (environment A). Its use in residential environments (environment B) may cause radio-frequency interference, requiring additional noise suppression measures.
Auxiliary contacts >General Use >DC
Short Circuit Current Rating >Basic Rating >SCCR	560 HP
Short Circuit Current Rating >Basic Rating >max. Fuse	640 HP
Short Circuit Current Rating >480 V High Fault >SCCR (fuse)	1200 HP
Short Circuit Current Rating >480 V High Fault >max. Fuse	1300 HP
Short Circuit Current Rating >600 V High Fault >SCCR (fuse)	1600 A
Short Circuit Current Rating >600 V High Fault >max. Fuse	A600
Rated operational current for specified heat dissipation [In]	P300
Heat dissipation per pole, current-dependent [Pvid]	600 V
Equipment heat dissipation, current-dependent [Pvid]	15 A
Static heat dissipation, non-current-dependent [Pvs]	250 V
Heat dissipation capacity [Pdiss]	1 A
Operating ambient temperature min.	85 kA
Operating ambient temperature max.	2000 A
10.2 Strength of materials and parts >10.2.2 Corrosion resistance	85 kA
10.2 Strength of materials and parts >10.2.3.1 Verification of thermal stability of enclosures	2000 A
10.2 Strength of materials and parts >10.2.3.2 Verification of resistance of insulating materials to normal heat	85 kA
10.2 Strength of materials and parts >10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects	2000 A
10.2 Strength of materials and parts >10.2.4 Resistance to ultra-violet (UV) radiation
10.2 Strength of materials and parts >10.2.5 Lifting	1600 A
10.2 Strength of materials and parts >10.2.6 Mechanical impact	41 W
10.2 Strength of materials and parts >10.2.7 Inscriptions	0 W
10.3 Degree of protection of ASSEMBLIES	13 W
10.4 Clearances and creepage distances	0 W
10.5 Protection against electric shock	-40 °C
10.6 Incorporation of switching devices and components	+60 °C
10.7 Internal electrical circuits and connections
10.8 Connections for external conductors	Meets the product standard´s requirements.
10.9 Insulation properties >10.9.2 Power-frequency electric strength	Meets the product standard´s requirements.
10.9 Insulation properties >10.9.3 Impulse withstand voltage	Meets the product standard´s requirements.
10.9 Insulation properties >10.9.4 Testing of enclosures made of insulating material	Meets the product standard´s requirements.
10.10 Temperature rise	Meets the product standard´s requirements.
10.11 Short-circuit rating	Does not apply, since the entire switchgear needs to be evaluated.
10.12 Electromagnetic compatibility	Does not apply, since the entire switchgear needs to be evaluated.
10.13 Mechanical function	Meets the product standard´s requirements.
Rated control supply voltage Us at AC 50HZ	Does not apply, since the entire switchgear needs to be evaluated.
Rated control supply voltage Us at AC 60HZ	Meets the product standard´s requirements.
Rated control supply voltage Us at DC	Does not apply, since the entire switchgear needs to be evaluated.
Voltage type for actuating	Does not apply, since the entire switchgear needs to be evaluated.
Rated operation current Ie at AC-1, 400 V	Is the panel builder´s responsibility.
Rated operation current Ie at AC-3, 400 V	Is the panel builder´s responsibility.
Rated operation power at AC-3, 400 V	Is the panel builder´s responsibility.
Rated operation current Ie at AC-4, 400 V	Is the panel builder´s responsibility.
Rated operation power at AC-4, 400 V	Is the panel builder´s responsibility.
Rated operation power NEMA	The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
Modular version	Is the panel builder´s responsibility. The specifications for the switchgear must be observed.
Number of auxiliary contacts as normally open contact	Is the panel builder´s responsibility. The specifications for the switchgear must be observed.
Number of auxiliary contacts as normally closed contact	The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
Type of electrical connection of main circuit
Number of normally closed contacts as main contact
Number of main contacts as normally open contact	230 - 250 V
Product Standards	230 - 250 V
UL File No.	230 - 250 V
UL Category Control No.	AC/DC
CSA File No.	2200 A
CSA Class No.	1600 A
North America Certification	900 kW
Specially designed for North America	1280 A
Side mounting auxiliary contacts	750 kW
possible variants at auxiliary contact module fitting options	895 kW
Characteristic curve	No
Characteristic curve	2
Characteristic curve	2
Characteristic curve	Rail connection

Mnelko olarak, endüstriyel otomasyon çözümlerinde güvenilir bir iş ortağı olarak, geniş ürün yelpazesi ile işletmenizin tüm ihtiyaçlarını karşılamaya yönelik kaliteli ve yenilikçi ürünler sunmaktayız. Ürün portföyümüz, modern endüstriyel süreçleri desteklemek amacıyla yüksek performans, dayanıklılık ve verimlilik ilkeleri doğrultusunda tasarlanmış çözümlerden oluşur.
Tüm ürünlerimiz, zorlu çalışma koşullarında dahi maksimum güvenilirlik sunar ve işletmenizin operasyonlarını sorunsuz şekilde sürdürmesine yardımcı olur. Endüstriyel otomasyon, enerji yönetimi, kablolama çözümleri ve daha birçok alanda sunduğumuz ürünler, farklı sektörlerdeki ihtiyaçlara esneklikle uyum sağlar.
Ayrıca, ürünlerimiz sadece kaliteli malzemelerle üretilmiş olup, uluslararası standartlara uygunluk göstermektedir. Müşterilerimize sunduğumuz çözümlerle, operasyonel verimliliklerini artırmalarına ve maliyetlerini optimize etmelerine olanak tanıyoruz. Teknolojik gelişmeleri yakından takip eden firmamız, sürekli olarak yenilikçi ürünler sunarak, müşterilerimizin rekabet avantajı elde etmesine destek vermektedir.
Her bir ürün sayfamızda, teknik detaylar, kullanım alanları ve ürün özelliklerine dair kapsamlı bilgilere ulaşabilirsiniz. Endüstriyel süreçlerinizi güçlendirmek için ihtiyacınız olan tüm ürünleri sitemizden keşfedebilir, sorunsuz bir satın alma deneyimi yaşayabilirsiniz.