DILEM4(190V50HZ,220V60HZ)
051802 DILEM4(190V50HZ,220V60HZ)
51802

Kontaktör, 190 V 50 Hz, 220 V 60 Hz, 4 kutuplu, 380 V 400 V, 4 kW, Vidalı terminaller, AC çalışma
Kontaktör, Uygulama: Motorlar ve Dirençli Yükler için Mini Kontaktörler, DILEM kontaktörler, Kullanım kategorisi: AC-1: Endüktif olmayan veya hafif endüktif yükler, dirençli fırınlar, NAC-3: Normal AC endüksiyon motorları: başlatma, çalışma sırasında kapatma, AC -4: Normal AC endüksiyon motorları: başlatma, takma, ters çevirme, darbeli yol verme, Bağlantı tekniği: Vidalı terminaller, Kutup sayısı: 4 kutup, Nominal çalışma akımı AC-3 380 V 400 V: Ie= 9 A, Nominal çalışma akımı AC- 1 Konvansiyonel serbest hava termik akımı, 3 kutuplu, 50 - 60 Hz 40 °C'de açık: Ith =Ie= 22 A, kapalı: Ith= 16 A, Nominal çalışma akımı AC-1 Konvansiyonel serbest hava termik akımı, 1 kutup açık: Ith= 60 A, kapalı: Ith= 50 A, Maks. üç fazlı motorlar için nominal değer, 50 - 60 Hz AC-3 220 V 230 V: P= 2,2 kW, 380 V 400 V: P= 4 kW, 660 V 690 V: P= 4 kW, Maks. üç fazlı motorlar için nominal değer, 50 - 60 Hz AC-4 220 V 230 V: P= 1,5 kW, 380 V 400 V: P= 3 kW, 660 V 690 V: P= 3 kW, Şunlarla kullanım için: …DILEM , …DILE, Gerilim AC/DC: AC işlemi

Product range	Contactors
Application	Mini Contactors for Motors and Resistive Loads
Subrange	DILEM contactors
Utilization category	AC-1: Non-inductive or slightly inductive loads, resistance furnaces NAC-3: Normal AC induction motors: starting, switch off during running AC-4: Normal AC induction motors: starting, plugging, reversing, inching
Connection technique	Screw terminals
Number of poles	4 pole
AC-3 >380 V 400 V [Ie]
AC-1 >Conventional free air thermal current, 3 pole, 50 - 60 Hz >Open >at 40 °C [Ith =Ie]	9 A
AC-3 >220 V 230 V [P]	22 A
AC-3 >380 V 400 V [P]
AC-3 >660 V 690 V [P]	2.2 kW
AC-4 >220 V 230 V [P]	4 kW
AC-4 >380 V 400 V [P]	4 kW
AC-4 >660 V 690 V [P]	1.5 kW
Contact sequence	3 kW
For use with	3 kW
Actuating voltage
Voltage AC/DC	…DILEM …DILE
Standards	190 V 50 Hz, 220 V 60 Hz
Lifespan, mechanical; Coil 50/60 Hz [Operations]	AC operation
Lifespan, mechanical [Operations]
Maximum operating frequency >Mechanical	IEC/EN 60947, VDE 0660, CSA, UL
Maximum operating frequency >electrical (Contactors without overload relay) [Operations/h]	7 x 106
Climatic proofing	20 x 106
Ambient temperature >Open	9000 Ops./h
Ambient temperature >Enclosed	See characteristic curves
Ambient temperature >Storage >Min. ambient temperature, storage	Damp heat, constant, to IEC 60068-2-78 Damp heat, cyclic, to IEC 60068-2-30
Ambient temperature >Storage >Ambient temperature, storage max.	-25 - +50 °C
Mounting position	- 25 - 40 °C
Mounting position	- 40 °C
Mechanical shock resistance (IEC/EN 60068-2-27) >Half-sinusoidal shock, 10 ms >Basic unit without auxiliary contact module >Main contacts, make contacts	+ 80 °C
Mechanical shock resistance (IEC/EN 60068-2-27) >Half-sinusoidal shock, 10 ms >Basic unit with auxiliary contact module >Main contacts make contact >Make	As required, except vertical with terminals A1/A2 at the bottom
Mechanical shock resistance (IEC/EN 60068-2-27) >Half-sinusoidal shock, 10 ms >Basic unit with auxiliary contact module >Auxiliary contacts Make/break contacts
Degree of Protection	10 g
Protection against direct contact when actuated from front (EN 50274)	10 g
Altitude	20/20 g
Weight	IP20
Terminal capacity of auxiliary and main contacts >Screw terminals >Solid	Finger and back-of-hand proof
Terminal capacity of auxiliary and main contacts >Screw terminals >Flexible with ferrule	Max. 2000 m
Terminal capacity of auxiliary and main contacts >Screw terminals >Solid or stranded	0.17 kg
Terminal capacity of auxiliary and main contacts >Screw terminals >Stripping length	1 x (0.75 - 2.5) 2 x (0.75 - 2.5) mm2
Terminal capacity of auxiliary and main contacts >Screw terminals >Terminal screw	1 x (0.75 - 1.5) 2 x (0.75 - 1.5) mm2
Terminal capacity of auxiliary and main contacts >Screw terminals >Pozidriv screwdriver	18 - 14 AWG
Terminal capacity of auxiliary and main contacts >Screw terminals >Standard screwdriver	8 mm
Terminal capacity of auxiliary and main contacts >Screw terminals >Max. tightening torque	M3.5
Rated impulse withstand voltage [Uimp]	2 Size
Overvoltage category/pollution degree	0.8 x 5.5 1 x 6 mm
Rated insulation voltage [Ui]	1.2 Nm
Rated operational voltage [Ue]
Safe isolation to EN 61140 >between coil and contacts	6000 V AC
Safe isolation to EN 61140 >between the contacts	III/3
Making capacity (cos ϕ to IEC/EN 60947)	690 V AC
Breaking capacity >220 V 230 V	690 V AC
Breaking capacity >380 V 400 V	300 V AC
Breaking capacity >500 V	300 V AC
Breaking capacity >660 V 690 V	110 A
Short-circuit protection maximum fuse >Type ”2”, 500 V [gL/gG]	90 A
Short-circuit protection maximum fuse >Type ”1”, 500 V [gL/gG]	90 A
AC-1 >Rated operational current >Conventional free air thermal current, 3 pole, 50 - 60 Hz >Open >at 40 °C [Ith =Ie]	64 A
AC-1 >Rated operational current >Conventional free air thermal current, 3 pole, 50 - 60 Hz >Open >at 50 °C [Ith =Ie]	42 A
AC-1 >Rated operational current >Conventional free air thermal current, 3 pole, 50 - 60 Hz >enclosed [Ith ]	10 A
AC-1 >Rated operational current >Conventional free air thermal current, 3 pole, 50 - 60 Hz >Notes	20 A
AC-1 >Rated operational current >Conventional free air thermal current, 1 pole >Notes
AC-1 >Rated operational current >Conventional free air thermal current, 1 pole >open [Ith ]	22 A
AC-1 >Rated operational current >Conventional free air thermal current, 1 pole >enclosed [Ith ]	20 A
AC-3 >Rated operational current >Open, 3-pole: 50 – 60 Hz >Notes	16 A
AC-3 >Rated operational current >Open, 3-pole: 50 – 60 Hz >220 V 230 V [Ie]	At maximum permissible ambient air temperature.
AC-3 >Rated operational current >Open, 3-pole: 50 – 60 Hz >240 V [Ie]	At maximum permissible ambient air temperature.
AC-3 >Rated operational current >Open, 3-pole: 50 – 60 Hz >380 V 400 V [Ie]	60 A
AC-3 >Rated operational current >Open, 3-pole: 50 – 60 Hz >415 V [Ie]	50 A
AC-3 >Rated operational current >Open, 3-pole: 50 – 60 Hz >440V [Ie]	At maximum permissible ambient temperature (open.)
AC-3 >Rated operational current >Open, 3-pole: 50 – 60 Hz >500 V [Ie]	9 A
AC-3 >Rated operational current >Open, 3-pole: 50 – 60 Hz >660 V 690 V [Ie]	9 A
AC-3 >Motor rating [P] >220 V 230 V [P]	9 A
AC-3 >Motor rating [P] >240V [P]	9 A
AC-3 >Motor rating [P] >380 V 400 V [P]	9 A
AC-3 >Motor rating [P] >415 V [P]	6.4 A
AC-3 >Motor rating [P] >440 V [P]	4.8 A
AC-3 >Motor rating [P] >500 V [P]	2.2 kW
AC-3 >Motor rating [P] >660 V 690 V [P]	2.5 kW
AC-4 >Rated operational current >Open, 3-pole: 50 – 60 Hz >Notes	4 kW
AC-4 >Rated operational current >Open, 3-pole: 50 – 60 Hz >220 V 230 V [Ie ]	4.3 kW
AC-4 >Rated operational current >Open, 3-pole: 50 – 60 Hz >240 V [Ie ]	4.6 kW
AC-4 >Rated operational current >Open, 3-pole: 50 – 60 Hz >380 V 400 V [Ie ]	4 kW
AC-4 >Rated operational current >Open, 3-pole: 50 – 60 Hz >415 V [Ie ]	4 kW
AC-4 >Rated operational current >Open, 3-pole: 50 – 60 Hz >440 V [Ie ]	At maximum permissible ambient air temperature.
AC-4 >Rated operational current >Open, 3-pole: 50 – 60 Hz >500 V [Ie ]	6.6 A
AC-4 >Rated operational current >Open, 3-pole: 50 – 60 Hz >660 V 690 V [Ie ]	6.6 A
AC-4 >Motor rating [P] >220 V 230 V [P]	6.6 A
AC-4 >Motor rating [P] >240 V [P]	6.6 A
AC-4 >Motor rating [P] >380 V 400 V [P]	6.6 A
AC-4 >Motor rating [P] >415 V [P]	5 A
AC-4 >Motor rating [P] >440 V [P]	3.4 A
AC-4 >Motor rating [P] >500 V [P]	1.5 kW
AC-4 >Motor rating [P] >660 V 690 V [P]	1.8 kW
Rated operational current open >DC-1 >12 V [Ie ]	3 kW
Rated operational current open >DC-1 >24 V [Ie ]	3.1 kW
Rated operational current open >DC-1 >60 V [Ie ]	3.3 kW
Rated operational current open >DC-1 >110 V [Ie ]	3 kW
Rated operational current open >DC-1 >220 V [Ie ]	3 kW
Current heat losses (3- or 4-pole) >at Ith, 50 °C
Voltage tolerance >AC operated >Single-voltage coil 50 Hz and dual-voltage coil 50 Hz, 60 Hz [Pick-up]	20 A
Voltage tolerance >AC operated >Dual-frequency coil 50/60 Hz [Pick-up] >Voltage tolerance Dual-frequency coil 50/60 Hz, max. pick-up voltage	20 A
Power consumption >AC operation >Single-voltage coil 50 Hz and dual-voltage coil 50 Hz, 60 Hz [Pick-up]	20 A
Power consumption >AC operation >Single-voltage coil 50 Hz and dual-voltage coil 50 Hz, 60 Hz [Pick-up]	20 A
Power consumption >AC operation >Single-voltage coil 50 Hz and dual-voltage coil 50 Hz, 60 Hz [Sealing]	20 A
Power consumption >AC operation >Single-voltage coil 50 Hz and dual-voltage coil 50 Hz, 60 Hz [Sealing]	7.9 W
Duty factor
Switching times at 100 % Uc >Make contact >Closing delay >Closing delay min.	0.8 - 1.1 x Uc
Switching times at 100 % Uc >Make contact >Closing delay >Closing delay max.	1.1 x Uc
Switching times at 100 % Uc >Make contact >Opening delay >Opening delay min.	25 VA
Switching times at 100 % Uc >Make contact >Opening delay >Opening delay max.	22 W
Switching times at 100 % Uc >Make contact >Closing delay with top mounting auxiliary contact	4.6 VA
Switching times at 100 % Uc >Reversing contactors >Changeover time at 110 % Uc >Changeover time min.	1.8 W
Switching times at 100 % Uc >Reversing contactors >Changeover time at 110 % Uc >Changeover time max.	100 % DF
Switching times at 100 % Uc >Reversing contactors >Arcing time at 690 V AC	14 ms
Positive operating contacts to EN 60947-5-1 appendix L, including auxiliary contact module	21 ms
Rated impulse withstand voltage [Uimp ]	8 ms
Overvoltage category/pollution degree	18 ms
Rated insulation voltage [Ui ]	45 ms
Rated operational voltage [Ue ]	16 ms
Safe isolation to EN 61140 >between coil and auxiliary contacts	21 ms
Safe isolation to EN 61140 >between the auxiliary contacts	12 ms
Rated operational current >AC-15 >220 V 240 V [Ie]
Rated operational current >AC-15 >380 V 415 V [Ie]	Yes
Rated operational current >AC-15 >500 V [Ie]	6000 V AC
Rated operational current >DC L/R ≦ 15 ms >Contacts in series: >1 [24 V]	III/3
Rated operational current >DC L/R ≦ 15 ms >Contacts in series: >2 [60 V]	690 V AC
Rated operational current >DC L/R ≦ 15 ms >Contacts in series: >3 [100 V]	600 V AC
Rated operational current >DC L/R ≦ 15 ms >Contacts in series: >3 [220 V]	300 V AC
Conv. thermal current [Ith]	300 V AC
Control circuit reliability [Failure rate]	6 A
Component lifespan at Ue = 240 V >AC-15 [Operations]	3 A
Component lifespan at Ue = 240 V >DC current >L/R = 50 ms: 2 contacts in series at Ie = 0.5 A [Operations]	1.5 A
Component lifespan at Ue = 240 V >DC current >Notes	2.5 A
Short-circuit rating without welding >Maximum overcurrent protective device >Short-circuit protection only	2.5 A
Short-circuit rating without welding >Short-circuit protection maximum fuse >500 V	1.5 A
Short-circuit rating without welding >Short-circuit protection maximum fuse >500 V	0.5 A
Current heat loss at a load of Ith per contact	10 A
Switching capacity >Maximum motor rating >Three-phase >200 V 208 V	<10-8, < one failure at 100 million operations (at Ue = 24 V DC, Umin = 17 V, Imin = 5.4 mA) λ
Switching capacity >Maximum motor rating >Three-phase >230 V 240 V	0.2 x 106
Switching capacity >Maximum motor rating >Three-phase >460 V 480 V	0.15 x 106
Switching capacity >Maximum motor rating >Three-phase >575 V 600 V	Switch-on and switch-off conditions based on DC-13, time constant as specified
Switching capacity >Maximum motor rating >Single-phase >115 V 120 V	PKZM0-4
Switching capacity >Maximum motor rating >Single-phase >230 V 240 V	6 A gG/gL
Switching capacity >General use	10 A fast
Short Circuit Current Rating >Basic Rating >SCCR	1.1 W
Short Circuit Current Rating >Basic Rating >max. Fuse
Rated operational current for specified heat dissipation [In]	2 HP
Heat dissipation per pole, current-dependent [Pvid]	3 HP
Equipment heat dissipation, current-dependent [Pvid]	5 HP
Static heat dissipation, non-current-dependent [Pvs]	5 HP
Heat dissipation capacity [Pdiss]	0.5 HP
Operating ambient temperature min.	1.5 HP
Operating ambient temperature max.	15 A
10.2 Strength of materials and parts >10.2.2 Corrosion resistance	5 kA
10.2 Strength of materials and parts >10.2.3.1 Verification of thermal stability of enclosures	45 A
10.2 Strength of materials and parts >10.2.3.2 Verification of resistance of insulating materials to normal heat
10.2 Strength of materials and parts >10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects	22 A
10.2 Strength of materials and parts >10.2.4 Resistance to ultra-violet (UV) radiation	2.39 W
10.2 Strength of materials and parts >10.2.5 Lifting	9.56 W
10.2 Strength of materials and parts >10.2.6 Mechanical impact	1.8 W
10.2 Strength of materials and parts >10.2.7 Inscriptions	0 W
10.3 Degree of protection of ASSEMBLIES	-25 °C
10.4 Clearances and creepage distances	+50 °C
10.5 Protection against electric shock
10.6 Incorporation of switching devices and components	Meets the product standard´s requirements.
10.7 Internal electrical circuits and connections	Meets the product standard´s requirements.
10.8 Connections for external conductors	Meets the product standard´s requirements.
10.9 Insulation properties >10.9.2 Power-frequency electric strength	Meets the product standard´s requirements.
10.9 Insulation properties >10.9.3 Impulse withstand voltage	Meets the product standard´s requirements.
10.9 Insulation properties >10.9.4 Testing of enclosures made of insulating material	Does not apply, since the entire switchgear needs to be evaluated.
10.10 Temperature rise	Does not apply, since the entire switchgear needs to be evaluated.
10.11 Short-circuit rating	Meets the product standard´s requirements.
10.12 Electromagnetic compatibility	Does not apply, since the entire switchgear needs to be evaluated.
10.13 Mechanical function	Meets the product standard´s requirements.
Rated control supply voltage Us at AC 50HZ	Does not apply, since the entire switchgear needs to be evaluated.
Rated control supply voltage Us at AC 60HZ	Does not apply, since the entire switchgear needs to be evaluated.
Rated control supply voltage Us at DC	Is the panel builder´s responsibility.
Voltage type for actuating	Is the panel builder´s responsibility.
Rated operation current Ie at AC-1, 400 V	Is the panel builder´s responsibility.
Rated operation current Ie at AC-3, 400 V	Is the panel builder´s responsibility.
Rated operation power at AC-3, 400 V	Is the panel builder´s responsibility.
Rated operation current Ie at AC-4, 400 V	The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
Rated operation power at AC-4, 400 V	Is the panel builder´s responsibility. The specifications for the switchgear must be observed.
Rated operation power NEMA	Is the panel builder´s responsibility. The specifications for the switchgear must be observed.
Modular version	The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
Number of auxiliary contacts as normally open contact
Number of auxiliary contacts as normally closed contact
Type of electrical connection of main circuit	190 - 190 V
Number of normally closed contacts as main contact	220 - 220 V
Number of main contacts as normally open contact	0 - 0 V
Product Standards	AC
UL File No.	22 A
UL Category Control No.	9 A
CSA File No.	4 kW
CSA Class No.	6.6 A
North America Certification	3 kW
Specially designed for North America	3.7 kW
Accessories	No
Characteristic curve	0
Characteristic curve	0
Characteristic curve	Screw connection
Characteristic curve	0

Mnelko olarak, endüstriyel otomasyon çözümlerinde güvenilir bir iş ortağı olarak, geniş ürün yelpazesi ile işletmenizin tüm ihtiyaçlarını karşılamaya yönelik kaliteli ve yenilikçi ürünler sunmaktayız. Ürün portföyümüz, modern endüstriyel süreçleri desteklemek amacıyla yüksek performans, dayanıklılık ve verimlilik ilkeleri doğrultusunda tasarlanmış çözümlerden oluşur.
Tüm ürünlerimiz, zorlu çalışma koşullarında dahi maksimum güvenilirlik sunar ve işletmenizin operasyonlarını sorunsuz şekilde sürdürmesine yardımcı olur. Endüstriyel otomasyon, enerji yönetimi, kablolama çözümleri ve daha birçok alanda sunduğumuz ürünler, farklı sektörlerdeki ihtiyaçlara esneklikle uyum sağlar.
Ayrıca, ürünlerimiz sadece kaliteli malzemelerle üretilmiş olup, uluslararası standartlara uygunluk göstermektedir. Müşterilerimize sunduğumuz çözümlerle, operasyonel verimliliklerini artırmalarına ve maliyetlerini optimize etmelerine olanak tanıyoruz. Teknolojik gelişmeleri yakından takip eden firmamız, sürekli olarak yenilikçi ürünler sunarak, müşterilerimizin rekabet avantajı elde etmesine destek vermektedir.
Her bir ürün sayfamızda, teknik detaylar, kullanım alanları ve ürün özelliklerine dair kapsamlı bilgilere ulaşabilirsiniz. Endüstriyel süreçlerinizi güçlendirmek için ihtiyacınız olan tüm ürünleri sitemizden keşfedebilir, sorunsuz bir satın alma deneyimi yaşayabilirsiniz.