DILEM-01-G(12VDC)
079642 DILEM-01-G(12VDC)
79642

Kontaktör, 12 V DC, 3 kutuplu, 380 V 400 V, 4 kW, Kontaklar N/C = Normalde kapalı= 1 NC, Vidalı terminaller, DC çalışması
Kontaktör, Uygulama: Motorlar ve Dirençli Yükler için Mini Kontaktörler, DILEM kontaktörler, Kullanım kategorisi: AC-1: Endüktif olmayan veya hafif endüktif yükler, dirençli fırınlar, NAC-3: Normal AC endüksiyon motorları: başlatma, çalışma sırasında kapatma, AC -4: Normal AC endüksiyon motorları: başlatma, takma, ters çevirme, yavaş yavaş çalıştırma, Bağlantı tekniği: Vidalı terminaller, Notlar: Ayrıca IE3 verimlilik sınıfına sahip motorlar için de uygundur, IE3'e hazır cihazlar ambalajlarının üzerindeki logo ile tanımlanır., Açıklama: Yardımcı kontaklı, Kutup sayısı: 3 kutuplu, Nominal çalışma akımı AC-3 380 V 400 V: Ie= 9 A, Nominal çalışma akımı AC-1 Konvansiyonel serbest hava termal akımı, 3 kutuplu, 50 - 60 Hz 40°'de açık C: Ith =Ie= 22 A, kapalı: Ith= 16 A, Nominal çalışma akımı AC-1 Konvansiyonel serbest hava termal akımı, 1 kutup açık: Ith= 50 A, kapalı: Ith= 40 A, Maks. üç fazlı motorlar için nominal değer, 50 - 60 Hz AC-3 220 V 230 V: P= 2,2 kW, 380 V 400 V: P= 4 kW, 660 V 690 V: P= 4 kW, Maks. üç fazlı motorlar için nominal değer, 50 - 60 Hz AC-4 220 V 230 V: P= 1,5 kW, 380 V 400 V: P= 3 kW, 660 V 690 V: P= 3 kW, Şunlarla kullanım için: …DILE , Kontaklar N/C = Normalde kapalı: 1 NC, Gerilim AC/DC: DC çalışması

Product range	Contactors
Application	Mini Contactors for Motors and Resistive Loads
Subrange	DILEM contactors
Utilization category	AC-1: Non-inductive or slightly inductive loads, resistance furnaces NAC-3: Normal AC induction motors: starting, switch off during running AC-4: Normal AC induction motors: starting, plugging, reversing, inching
Notes
Connection technique	Also suitable for motors with efficiency class IE3. IE3-ready devices are identified by the logo on their packaging.
Description	Screw terminals
Number of poles	With auxiliary contact
AC-3 >380 V 400 V [Ie]	3 pole
AC-1 >Conventional free air thermal current, 3 pole, 50 - 60 Hz >Open >at 40 °C [Ith =Ie]
AC-3 >220 V 230 V [P]	9 A
AC-3 >380 V 400 V [P]	22 A
AC-3 >660 V 690 V [P]
AC-4 >220 V 230 V [P]	2.2 kW
AC-4 >380 V 400 V [P]	4 kW
AC-4 >660 V 690 V [P]	4 kW
N/C = Normally closed	1.5 kW
Contact sequence	3 kW
Instructions	3 kW
For use with
Actuating voltage	1 NC
Voltage AC/DC
Standards	Integrated diode-resistor combination
Lifespan, mechanical [Operations]	…DILE
Maximum operating frequency >Mechanical	12 V DC
Maximum operating frequency >electrical (Contactors without overload relay) [Operations/h]	DC operation
Climatic proofing
Ambient temperature >Open	IEC/EN 60947, VDE 0660, CSA, UL
Ambient temperature >Enclosed	20 x 106
Ambient temperature >Storage >Min. ambient temperature, storage	9000 Ops./h
Ambient temperature >Storage >Ambient temperature, storage max.	Page 05/070
Mounting position	Damp heat, constant, to IEC 60068-2-78 Damp heat, cyclic, to IEC 60068-2-30
Mounting position	-25 - +50 °C
Mechanical shock resistance (IEC/EN 60068-2-27) >Half-sinusoidal shock, 10 ms >Basic unit without auxiliary contact module >Main contacts, make contacts	- 25 - 40 °C
Mechanical shock resistance (IEC/EN 60068-2-27) >Half-sinusoidal shock, 10 ms >Basic unit without auxiliary contact module >Main contacts Make/break contacts >Break contact	- 40 °C
Mechanical shock resistance (IEC/EN 60068-2-27) >Half-sinusoidal shock, 10 ms >Basic unit with auxiliary contact module >Main contacts make contact >Make	+ 80 °C
Mechanical shock resistance (IEC/EN 60068-2-27) >Half-sinusoidal shock, 10 ms >Basic unit with auxiliary contact module >Auxiliary contacts Make/break contacts	As required, except vertical with terminals A1/A2 at the bottom
Degree of Protection
Protection against direct contact when actuated from front (EN 50274)	10 g
Altitude	10 g
Weight	10 g
Terminal capacity of auxiliary and main contacts >Screw terminals >Solid	20/20 g
Terminal capacity of auxiliary and main contacts >Screw terminals >Flexible with ferrule	IP20
Terminal capacity of auxiliary and main contacts >Screw terminals >Solid or stranded	Finger and back-of-hand proof
Terminal capacity of auxiliary and main contacts >Screw terminals >Stripping length	Max. 2000 m
Terminal capacity of auxiliary and main contacts >Screw terminals >Terminal screw	0.206 kg
Terminal capacity of auxiliary and main contacts >Screw terminals >Pozidriv screwdriver	1 x (0.75 - 2.5) 2 x (0.75 - 2.5) mm2
Terminal capacity of auxiliary and main contacts >Screw terminals >Standard screwdriver	1 x (0.75 - 1.5) 2 x (0.75 - 1.5) mm2
Terminal capacity of auxiliary and main contacts >Screw terminals >Max. tightening torque	18 - 14 AWG
Rated impulse withstand voltage [Uimp]	8 mm
Overvoltage category/pollution degree	M3.5
Rated insulation voltage [Ui]	2 Size
Rated operational voltage [Ue]	0.8 x 5.5 1 x 6 mm
Safe isolation to EN 61140 >between coil and contacts	1.2 Nm
Safe isolation to EN 61140 >between the contacts
Making capacity (cos ϕ to IEC/EN 60947)	6000 V AC
Breaking capacity >220 V 230 V	III/3
Breaking capacity >380 V 400 V	690 V AC
Breaking capacity >500 V	690 V AC
Breaking capacity >660 V 690 V	300 V AC
Short-circuit protection maximum fuse >Type ”2”, 500 V [gL/gG]	300 V AC
Short-circuit protection maximum fuse >Type ”1”, 500 V [gL/gG]	110 A
AC-1 >Rated operational current >Conventional free air thermal current, 3 pole, 50 - 60 Hz >Open >at 40 °C [Ith =Ie]	90 A
AC-1 >Rated operational current >Conventional free air thermal current, 3 pole, 50 - 60 Hz >Open >at 50 °C [Ith =Ie]	90 A
AC-1 >Rated operational current >Conventional free air thermal current, 3 pole, 50 - 60 Hz >Open >at 55 °C [Ith =Ie]	64 A
AC-1 >Rated operational current >Conventional free air thermal current, 3 pole, 50 - 60 Hz >enclosed [Ith ]	42 A
AC-1 >Rated operational current >Conventional free air thermal current, 3 pole, 50 - 60 Hz >Notes	10 A
AC-1 >Rated operational current >Conventional free air thermal current, 1 pole >Notes	20 A
AC-1 >Rated operational current >Conventional free air thermal current, 1 pole >open [Ith ]
AC-1 >Rated operational current >Conventional free air thermal current, 1 pole >enclosed [Ith ]	22 A
AC-3 >Rated operational current >Open, 3-pole: 50 – 60 Hz >Notes	20 A
AC-3 >Rated operational current >Open, 3-pole: 50 – 60 Hz >220 V 230 V [Ie]	19 A
AC-3 >Rated operational current >Open, 3-pole: 50 – 60 Hz >240 V [Ie]	16 A
AC-3 >Rated operational current >Open, 3-pole: 50 – 60 Hz >380 V 400 V [Ie]	At maximum permissible ambient air temperature.
AC-3 >Rated operational current >Open, 3-pole: 50 – 60 Hz >415 V [Ie]	At maximum permissible ambient air temperature.
AC-3 >Rated operational current >Open, 3-pole: 50 – 60 Hz >440V [Ie]	50 A
AC-3 >Rated operational current >Open, 3-pole: 50 – 60 Hz >500 V [Ie]	40 A
AC-3 >Rated operational current >Open, 3-pole: 50 – 60 Hz >660 V 690 V [Ie]	At maximum permissible ambient temperature (open.)
AC-3 >Motor rating [P] >220 V 230 V [P]	9 A
AC-3 >Motor rating [P] >240V [P]	9 A
AC-3 >Motor rating [P] >380 V 400 V [P]	9 A
AC-3 >Motor rating [P] >415 V [P]	9 A
AC-3 >Motor rating [P] >440 V [P]	9 A
AC-3 >Motor rating [P] >500 V [P]	6.4 A
AC-3 >Motor rating [P] >660 V 690 V [P]	4.8 A
AC-4 >Rated operational current >Open, 3-pole: 50 – 60 Hz >Notes	2.2 kW
AC-4 >Rated operational current >Open, 3-pole: 50 – 60 Hz >220 V 230 V [Ie ]	2.5 kW
AC-4 >Rated operational current >Open, 3-pole: 50 – 60 Hz >240 V [Ie ]	4 kW
AC-4 >Rated operational current >Open, 3-pole: 50 – 60 Hz >380 V 400 V [Ie ]	4.3 kW
AC-4 >Rated operational current >Open, 3-pole: 50 – 60 Hz >415 V [Ie ]	4.6 kW
AC-4 >Rated operational current >Open, 3-pole: 50 – 60 Hz >440 V [Ie ]	4 kW
AC-4 >Rated operational current >Open, 3-pole: 50 – 60 Hz >500 V [Ie ]	4 kW
AC-4 >Rated operational current >Open, 3-pole: 50 – 60 Hz >660 V 690 V [Ie ]	At maximum permissible ambient air temperature.
AC-4 >Motor rating [P] >220 V 230 V [P]	6.6 A
AC-4 >Motor rating [P] >240 V [P]	6.6 A
AC-4 >Motor rating [P] >380 V 400 V [P]	6.6 A
AC-4 >Motor rating [P] >415 V [P]	6.6 A
AC-4 >Motor rating [P] >440 V [P]	6.6 A
AC-4 >Motor rating [P] >500 V [P]	5 A
AC-4 >Motor rating [P] >660 V 690 V [P]	3.4 A
Rated operational current open >DC-1 >12 V [Ie ]	1.5 kW
Rated operational current open >DC-1 >24 V [Ie ]	1.8 kW
Rated operational current open >DC-1 >60 V [Ie ]	3 kW
Rated operational current open >DC-1 >110 V [Ie ]	3.1 kW
Rated operational current open >DC-1 >220 V [Ie ]	3.3 kW
Current heat losses (3- or 4-pole) >at Ith, 50 °C	3 kW
Current heat losses (3- or 4-pole) >at Ie to AC-3/400 V	3 kW
Voltage tolerance >DC operated >Pick-up voltage
Power consumption >DC operation >Power consumption Pick-up = Sealing	20 A
Power consumption >DC operation >Notes	20 A
Duty factor	20 A
Switching times at 100 % Uc >Make contact >Closing delay >Closing delay min.	20 A
Switching times at 100 % Uc >Make contact >Closing delay >Closing delay max.	20 A
Switching times at 100 % Uc >Make contact >Opening delay >Opening delay min.	4.4 W
Switching times at 100 % Uc >Make contact >Opening delay >Opening delay max.	0.9 W
Switching times at 100 % Uc >Make contact >Closing delay with top mounting auxiliary contact
Switching times at 100 % Uc >Reversing contactors >Changeover time at 110 % Uc >Changeover time min.	0.8 - 1.1
Switching times at 100 % Uc >Reversing contactors >Changeover time at 110 % Uc >Changeover time max.	2.3 VA/W
Switching times at 100 % Uc >Reversing contactors >Arcing time at 690 V AC	Smoothed DC voltage or three-phase bridge rectifier
Positive operating contacts to EN 60947-5-1 appendix L, including auxiliary contact module	100 % DF
Rated impulse withstand voltage [Uimp ]	26 ms
Overvoltage category/pollution degree	35 ms
Rated insulation voltage [Ui ]	15 ms
Rated operational voltage [Ue ]	25 ms
Safe isolation to EN 61140 >between coil and auxiliary contacts	70 ms
Safe isolation to EN 61140 >between the auxiliary contacts	40 ms
Rated operational current >AC-15 >220 V 240 V [Ie]	50 ms
Rated operational current >AC-15 >380 V 415 V [Ie]	12 ms
Rated operational current >AC-15 >500 V [Ie]
Rated operational current >DC L/R ≦ 15 ms >Contacts in series: >1 [24 V]	Yes
Rated operational current >DC L/R ≦ 15 ms >Contacts in series: >2 [60 V]	6000 V AC
Rated operational current >DC L/R ≦ 15 ms >Contacts in series: >3 [100 V]	III/3
Rated operational current >DC L/R ≦ 15 ms >Contacts in series: >3 [220 V]	690 V AC
Conv. thermal current [Ith]	600 V AC
Control circuit reliability [Failure rate]	300 V AC
Component lifespan at Ue = 240 V >AC-15 [Operations]	300 V AC
Component lifespan at Ue = 240 V >DC current >L/R = 50 ms: 2 contacts in series at Ie = 0.5 A [Operations]	6 A
Component lifespan at Ue = 240 V >DC current >Notes	3 A
Short-circuit rating without welding >Maximum overcurrent protective device >Short-circuit protection only	1.5 A
Short-circuit rating without welding >Short-circuit protection maximum fuse >500 V	2.5 A
Short-circuit rating without welding >Short-circuit protection maximum fuse >500 V	2.5 A
Current heat loss at a load of Ith per contact	1.5 A
Switching capacity >Maximum motor rating >Three-phase >200 V 208 V	0.5 A
Switching capacity >Maximum motor rating >Three-phase >230 V 240 V	10 A
Switching capacity >Maximum motor rating >Three-phase >460 V 480 V	<10-8, < one failure at 100 million operations (at Ue = 24 V DC, Umin = 17 V, Imin = 5.4 mA) λ
Switching capacity >Maximum motor rating >Three-phase >575 V 600 V	0.2 x 106
Switching capacity >Maximum motor rating >Single-phase >115 V 120 V	0.15 x 106
Switching capacity >Maximum motor rating >Single-phase >230 V 240 V	Switch-on and switch-off conditions based on DC-13, time constant as specified
Switching capacity >General use	PKZM0-4
Auxiliary contacts >Pilot Duty >AC operated	6 A gG/gL
Auxiliary contacts >Pilot Duty >DC operated	10 A fast
Auxiliary contacts >General Use >AC	1.1 W
Auxiliary contacts >General Use >AC
Auxiliary contacts >General Use >DC	2 HP
Auxiliary contacts >General Use >DC	3 HP
Short Circuit Current Rating >Basic Rating >SCCR	5 HP
Short Circuit Current Rating >Basic Rating >max. Fuse	5 HP
Rated operational current for specified heat dissipation [In]	0.5 HP
Heat dissipation per pole, current-dependent [Pvid]	1.5 HP
Equipment heat dissipation, current-dependent [Pvid]	15 A
Static heat dissipation, non-current-dependent [Pvs]	A600
Heat dissipation capacity [Pdiss]	P300
Operating ambient temperature min.	600 V
Operating ambient temperature max.	10 A
10.2 Strength of materials and parts >10.2.2 Corrosion resistance	250 V
10.2 Strength of materials and parts >10.2.3.1 Verification of thermal stability of enclosures	0.5 A
10.2 Strength of materials and parts >10.2.3.2 Verification of resistance of insulating materials to normal heat	5 kA
10.2 Strength of materials and parts >10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects	45 A
10.2 Strength of materials and parts >10.2.4 Resistance to ultra-violet (UV) radiation
10.2 Strength of materials and parts >10.2.5 Lifting	9 A
10.2 Strength of materials and parts >10.2.6 Mechanical impact	0.3 W
10.2 Strength of materials and parts >10.2.7 Inscriptions	0.9 W
10.3 Degree of protection of ASSEMBLIES	2.3 W
10.4 Clearances and creepage distances	0 W
10.5 Protection against electric shock	-25 °C
10.6 Incorporation of switching devices and components	+50 °C
10.7 Internal electrical circuits and connections
10.8 Connections for external conductors	Meets the product standard´s requirements.
10.9 Insulation properties >10.9.2 Power-frequency electric strength	Meets the product standard´s requirements.
10.9 Insulation properties >10.9.3 Impulse withstand voltage	Meets the product standard´s requirements.
10.9 Insulation properties >10.9.4 Testing of enclosures made of insulating material	Meets the product standard´s requirements.
10.10 Temperature rise	Meets the product standard´s requirements.
10.11 Short-circuit rating	Does not apply, since the entire switchgear needs to be evaluated.
10.12 Electromagnetic compatibility	Does not apply, since the entire switchgear needs to be evaluated.
10.13 Mechanical function	Meets the product standard´s requirements.
Rated control supply voltage Us at AC 50HZ	Does not apply, since the entire switchgear needs to be evaluated.
Rated control supply voltage Us at AC 60HZ	Meets the product standard´s requirements.
Rated control supply voltage Us at DC	Does not apply, since the entire switchgear needs to be evaluated.
Voltage type for actuating	Does not apply, since the entire switchgear needs to be evaluated.
Rated operation current Ie at AC-1, 400 V	Is the panel builder´s responsibility.
Rated operation current Ie at AC-3, 400 V	Is the panel builder´s responsibility.
Rated operation power at AC-3, 400 V	Is the panel builder´s responsibility.
Rated operation current Ie at AC-4, 400 V	Is the panel builder´s responsibility.
Rated operation power at AC-4, 400 V	Is the panel builder´s responsibility.
Rated operation power NEMA	The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
Modular version	Is the panel builder´s responsibility. The specifications for the switchgear must be observed.
Number of auxiliary contacts as normally open contact	Is the panel builder´s responsibility. The specifications for the switchgear must be observed.
Number of auxiliary contacts as normally closed contact	The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
Type of electrical connection of main circuit
Number of normally closed contacts as main contact
Number of main contacts as normally open contact	0 - 0 V
Product Standards	0 - 0 V
UL File No.	12 - 12 V
UL Category Control No.	DC
CSA File No.	22 A
CSA Class No.	9 A
North America Certification	4 kW
Specially designed for North America	6.6 A
Accessories	3 kW
Characteristic curve	3.7 kW
Characteristic curve	No
Characteristic curve	0

Mnelko olarak, endüstriyel otomasyon çözümlerinde güvenilir bir iş ortağı olarak, geniş ürün yelpazesi ile işletmenizin tüm ihtiyaçlarını karşılamaya yönelik kaliteli ve yenilikçi ürünler sunmaktayız. Ürün portföyümüz, modern endüstriyel süreçleri desteklemek amacıyla yüksek performans, dayanıklılık ve verimlilik ilkeleri doğrultusunda tasarlanmış çözümlerden oluşur.
Tüm ürünlerimiz, zorlu çalışma koşullarında dahi maksimum güvenilirlik sunar ve işletmenizin operasyonlarını sorunsuz şekilde sürdürmesine yardımcı olur. Endüstriyel otomasyon, enerji yönetimi, kablolama çözümleri ve daha birçok alanda sunduğumuz ürünler, farklı sektörlerdeki ihtiyaçlara esneklikle uyum sağlar.
Ayrıca, ürünlerimiz sadece kaliteli malzemelerle üretilmiş olup, uluslararası standartlara uygunluk göstermektedir. Müşterilerimize sunduğumuz çözümlerle, operasyonel verimliliklerini artırmalarına ve maliyetlerini optimize etmelerine olanak tanıyoruz. Teknolojik gelişmeleri yakından takip eden firmamız, sürekli olarak yenilikçi ürünler sunarak, müşterilerimizin rekabet avantajı elde etmesine destek vermektedir.
Her bir ürün sayfamızda, teknik detaylar, kullanım alanları ve ürün özelliklerine dair kapsamlı bilgilere ulaşabilirsiniz. Endüstriyel süreçlerinizi güçlendirmek için ihtiyacınız olan tüm ürünleri sitemizden keşfedebilir, sorunsuz bir satın alma deneyimi yaşayabilirsiniz.