alt
alt

DILDC400/22(RDS250)
186872 DILDC400/22(RDS250)
186872

DC kontaktör, 2 N/A, 2 NC, 1000 V: 400 A, RDS 250: 110 - 250 V 40 - 60 Hz/110 - 350 V DC, AC ve DC çalışma DC kontaktör, dünya pazarlarına yönelik cihaz: UL/CSA, CCC, kompakt boyutlar, doğrudan PLC aracılığıyla çalıştırılma seçeneği olan konfor serisi, çalıştırma elektroniğinde entegre bastırıcı devre ile, IEC/EN 60947'ye uygundur, AC/DC geniş -voltaj aralığı bobini, elektronik olarak kontrol edilir, minimum başlatma ve tutma gücü, gelişmiş elektromanyetik uyumluluk, vidalı terminallerle kontrol kablosu bağlantıları, 2 N/O 2 N/C yardımcı kontak takılı, EN 61140'a göre güvenli izolasyon, kilitli karşılıklı kontaklar, vidalı sabitleme, 1000 V'a kadar kullanılabilir, IP00 koruma sınıfı, EN 50274'e uygun terminal kapağıyla parmak korumalı, 1 milyon anahtarlama işlemine kadar mekanik ömür, mevcut aksesuarlar: yandan montajlı yardımcı kontak modülü

DC kontaktör, 2 N/A, 2 NC, 1000 V: 400 A, RDS 250: 110 - 250 V 40 - 60 Hz/110 - 350 V DC, AC ve DC çalışma
DC kontaktör, dünya pazarlarına yönelik cihaz: UL/CSA, CCC, kompakt boyutlar, doğrudan PLC aracılığıyla çalıştırılma seçeneği olan konfor serisi, çalıştırma elektroniğinde entegre bastırıcı devre ile, IEC/EN 60947'ye uygundur, AC/DC geniş -voltaj aralığı bobini, elektronik olarak kontrol edilir, minimum başlatma ve tutma gücü, gelişmiş elektromanyetik uyumluluk, vidalı terminallerle kontrol kablosu bağlantıları, 2 N/O 2 N/C yardımcı kontak takılı, EN 61140'a göre güvenli izolasyon, kilitli karşılıklı kontaklar, vidalı sabitleme, 1000 V'a kadar kullanılabilir, IP00 koruma sınıfı, EN 50274'e uygun terminal kapağıyla parmak korumalı, 1 milyon anahtarlama işlemine kadar mekanik ömür, mevcut aksesuarlar: yandan montajlı yardımcı kontak modülü

Product range Contactors
Application DC contactor
Subrange Comfort devices greater than 170 A
Instructions DILDC contactors feature an electronic arc suppression system. Because of this, it is important not to exceed any technical data limits in general – especially the making and breaking capacity limits. Opening the device will immediately void the warranty.
integrated suppressor circuit in actuating electronics
Connection technique Screw connection
DC-1
>Notes
DC-1
>1000 V [Ie]
Ie at 60 °C
Can be combined with auxiliary contact 400 A
Actuating voltage DILM820-XHI…
Voltage AC/DC RDS 250: 110 - 250 V 40 - 60 Hz/110 - 350 V DC
N/O = Normally open AC and DC operation
N/C = Normally closed
possible variants at auxiliary contact module fitting options 2 N/O
Side mounting auxiliary contacts 2 NC
Standards
Lifespan, mechanical
>AC operated [Operations]
on the side: 2 x DILM820-XHI11(V)-SI; 2 x DILM820-XHI11-SA
Lifespan, mechanical
>DC operated [Operations]
2100DRW-97
Operating frequency, mechanical
>AC operated [Operations/h]
Operating frequency, mechanical
>DC operated [Operations/h]
EN60947-4-1, EN60947-5-1
Maximum operating frequency
>electrical (Contactors without overload relay) [Operations/h]
1 x 106
Climatic proofing 1 x 106
Ambient temperature
>Open
1000
Ambient temperature
>Enclosed
1000
Ambient temperature
>Storage
100
Mounting position Damp heat, constant, to IEC 60068-2-78
Damp heat, cyclic, to IEC 60068-2-30
Mechanical shock resistance (IEC/EN 60068-2-27)
>Half-sinusoidal shock, 10 ms
>Main contacts
>N/O contact
-40 - +70 °C
Mechanical shock resistance (IEC/EN 60068-2-27)
>Half-sinusoidal shock, 10 ms
>Auxiliary contacts
>N/O contact
- 40 - + 40 °C
Mechanical shock resistance (IEC/EN 60068-2-27)
>Half-sinusoidal shock, 10 ms
>Auxiliary contacts
>N/C contact
- 40 - + 80 °C
Degree of Protection 210N040210N018
Protection against direct contact when actuated from front (EN 50274) 10 g
Altitude 10 g
Weight
>Weight
8 g
Terminal capacity main cable
>Flexible with cable lug
IP00
Terminal capacity main cable
>Stranded with cable lug
Covers on main terminals safeguarded against accidental contact with fingers or back of hand
Terminal capacity main cable
>Solid or stranded
Max. 2000 m
Terminal capacity main cable
>Busbar [Width]
7.5 kg
Main cable connection screw/bolt 50 - 240 mm2
Tightening torque 50 - 240 mm2
Terminal capacity control circuit cables
>Solid
1/0 - 500 MCM AWG
Terminal capacity control circuit cables
>Flexible with ferrule
40 mm
Terminal capacity control circuit cables
>Solid or stranded
M10
Control circuit cable connection screw/bolt 24 Nm
Tightening torque 1 x (0.75 - 2.5)
2 x (0.75 - 2.5) mm2
Tool
>Main cable
>Width across flats
1 x (0.75 - 2.5)
2 x (0.75 - 2.5) mm2
Tool
>Control circuit cables
>Pozidriv screwdriver
2 x (18 - 12) AWG
Tool
>Control circuit cables
>Standard screwdriver
M3.5
Rated impulse withstand voltage [Uimp] 1.2 Nm
Overvoltage category/pollution degree 16 mm
Rated insulation voltage [Ui] 2 Size
Rated operational voltage [Ue] 0.8 x 5.5
1 x 6 mm
Safe isolation to EN 61140
>Between control inputs and main contacts
Safe isolation to EN 61140
>Between auxiliary contacts and main contacts
8000 V
Safe isolation to EN 61140
>between the contacts
III/3
Making capacity 1000 V DC
Breaking capacity
>220 V 230 V
1000 V DC
Breaking capacity
>380 V 400 V
1000 V
Breaking capacity
>500 V
1000 V
Breaking capacity
>660 V 690 V
1000 V
Breaking capacity
>1000 V
600 A
Short-circuit rating
>Short-circuit protection maximum fuse
>Type “2” coordination
>400 V DC [gR 1000 VDC]
600 A
Short-circuit rating
>Short-circuit protection maximum fuse
>Type “2” coordination
>690 V DC [gR 1000 VDC]
600 A
Short-circuit rating
>Short-circuit protection maximum fuse
>Type “2” coordination
>1000 V DC [gR 1000 VDC]
600 A
Short-circuit rating
>Short-circuit protection maximum fuse
>Type “1” coordination
>400 V DC [gR 1000 VDC]
600 A
Short-circuit rating
>Short-circuit protection maximum fuse
>Type “1” coordination
>690 V DC [gR 1000 VDC]
600 A
Short-circuit rating
>Short-circuit protection maximum fuse
>Type “1” coordination
>1000 V DC [gR 1000 VDC]
630 (max. short-circuit current 6 kA) A
Rated operational current, open
>DC-1
>Notes
630 (max. short-circuit current 6 kA) A
Rated operational current, open
>DC-1
>1000 V [Ie]
630 (max. short-circuit current 6 kA) A
1 pole, at Ith 630 (max. short-circuit current 30 kA) A
Voltage tolerance
>US
630 (max. short-circuit current 30 kA) A
Voltage tolerance
>AC operated [Pick-up]
630 (max. short-circuit current 30 kA) A
Voltage tolerance
>DC operated [Pick-up]
Voltage tolerance
>AC operated [Drop-out]
Ie at 60 °C
Voltage tolerance
>DC operated [Drop-out]
400 A
Voltage tolerance
>Actuation directly from PLC
>UC
Voltage tolerance
>Actuation directly from PLC
>UC min - max
32 W
Power consumption of the coil in a cold state and 1.0 x US
>Note on power consumption
Power consumption of the coil in a cold state and 1.0 x US
>Pull-in power [Pick-up]
110 - 250 V 40-60 Hz
110 - 350 V DC
Power consumption of the coil in a cold state and 1.0 x US
>Pull-in power [Pick-up]
0.7 x US min - 1.15 x US max
Power consumption of the coil in a cold state and 1.0 x US
>Sealing power [Sealing]
0.7 x US min - 1.15 x US max
Power consumption of the coil in a cold state and 1.0 x US
>Sealing power [Sealing]
0.2 x US max - 0.6 x US min
Duty factor 0.2 x US max - 0.6 x US min
Changeover time at 100 % US (recommended value)
>Main contacts
>Closing delay
24 V DC
Changeover time at 100 % US (recommended value)
>Main contacts
>Opening delay
15 - 31,2 V DC
PLC signal level (A3 - A4) to IEC/EN 61131-2 (type 2)
>High
Control transformer with uk ≦ 6%
PLC signal level (A3 - A4) to IEC/EN 61131-2 (type 2)
>Low
600 VA
Electromagnetic compatibility 550 W
Switching capacity
>Maximum motor rating
>Single-phase
>General use
18 VA
Auxiliary contacts
>Pilot Duty
>AC operated
9.5 W
Auxiliary contacts
>Pilot Duty
>DC operated
100 % DF
Auxiliary contacts
>General Use
>AC
80 ms
Auxiliary contacts
>General Use
>AC
40 ms
Auxiliary contacts
>General Use
>DC
15 V
Auxiliary contacts
>General Use
>DC
5 V
Rated operational current for specified heat dissipation [In]
Heat dissipation per pole, current-dependent [Pvid] This product is designed for operation in industrial environments (environment A). Its use in residential environments (environment B) may cause radio-frequency interference, requiring additional noise suppression measures.
Equipment heat dissipation, current-dependent [Pvid]
Static heat dissipation, non-current-dependent [Pvs] 400 A
Heat dissipation capacity [Pdiss] A600
Operating ambient temperature min. P300
Operating ambient temperature max. 600 V
10.2 Strength of materials and parts
>10.2.2 Corrosion resistance
15 A
10.2 Strength of materials and parts
>10.2.3.1 Verification of thermal stability of enclosures
250 V
10.2 Strength of materials and parts
>10.2.3.2 Verification of resistance of insulating materials to normal heat
1 A
10.2 Strength of materials and parts
>10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects
10.2 Strength of materials and parts
>10.2.4 Resistance to ultra-violet (UV) radiation
400 A
10.2 Strength of materials and parts
>10.2.5 Lifting
32 W
10.2 Strength of materials and parts
>10.2.6 Mechanical impact
0 W
10.2 Strength of materials and parts
>10.2.7 Inscriptions
9 W
10.3 Degree of protection of ASSEMBLIES 0 W
10.4 Clearances and creepage distances -40 °C
10.5 Protection against electric shock +70 °C
10.6 Incorporation of switching devices and components
10.7 Internal electrical circuits and connections Meets the product standard´s requirements.
10.8 Connections for external conductors Meets the product standard´s requirements.
10.9 Insulation properties
>10.9.2 Power-frequency electric strength
Meets the product standard´s requirements.
10.9 Insulation properties
>10.9.3 Impulse withstand voltage
Meets the product standard´s requirements.
10.9 Insulation properties
>10.9.4 Testing of enclosures made of insulating material
Meets the product standard´s requirements.
10.10 Temperature rise Does not apply, since the entire switchgear needs to be evaluated.
10.11 Short-circuit rating Does not apply, since the entire switchgear needs to be evaluated.
10.12 Electromagnetic compatibility Meets the product standard´s requirements.
10.13 Mechanical function Does not apply, since the entire switchgear needs to be evaluated.
Rated control supply voltage Us at AC 50HZ Meets the product standard´s requirements.
Rated control supply voltage Us at AC 60HZ Does not apply, since the entire switchgear needs to be evaluated.
Rated control supply voltage Us at DC Does not apply, since the entire switchgear needs to be evaluated.
Voltage type for actuating Is the panel builder´s responsibility.
Rated operation power at DC-3 / DC-5 at 440 V Is the panel builder´s responsibility.
Rated operation current Ie at DC-3 / DC-5 at 440 V Is the panel builder´s responsibility.
Modular version Is the panel builder´s responsibility.
Number of auxiliary contacts as normally open contact Is the panel builder´s responsibility.
Number of auxiliary contacts as normally closed contact The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
Type of electrical connection of main circuit Is the panel builder´s responsibility. The specifications for the switchgear must be observed.
Number of normally closed contacts as main contact Is the panel builder´s responsibility. The specifications for the switchgear must be observed.
Number of main contacts as normally open contact The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
Product Standards
UL File No.
UL Category Control No. 110 - 250 V
CSA File No. 110 - 250 V
CSA Class No. 110 - 350 V
North America Certification AC/DC
Specially designed for North America 0 kW
Side mounting auxiliary contacts 0 A
possible variants at auxiliary contact module fitting options No

Mnelko olarak, endüstriyel otomasyon çözümlerinde güvenilir bir iş ortağı olarak, geniş ürün yelpazesi ile işletmenizin tüm ihtiyaçlarını karşılamaya yönelik kaliteli ve yenilikçi ürünler sunmaktayız. Ürün portföyümüz, modern endüstriyel süreçleri desteklemek amacıyla yüksek performans, dayanıklılık ve verimlilik ilkeleri doğrultusunda tasarlanmış çözümlerden oluşur.
Tüm ürünlerimiz, zorlu çalışma koşullarında dahi maksimum güvenilirlik sunar ve işletmenizin operasyonlarını sorunsuz şekilde sürdürmesine yardımcı olur. Endüstriyel otomasyon, enerji yönetimi, kablolama çözümleri ve daha birçok alanda sunduğumuz ürünler, farklı sektörlerdeki ihtiyaçlara esneklikle uyum sağlar.
Ayrıca, ürünlerimiz sadece kaliteli malzemelerle üretilmiş olup, uluslararası standartlara uygunluk göstermektedir. Müşterilerimize sunduğumuz çözümlerle, operasyonel verimliliklerini artırmalarına ve maliyetlerini optimize etmelerine olanak tanıyoruz. Teknolojik gelişmeleri yakından takip eden firmamız, sürekli olarak yenilikçi ürünler sunarak, müşterilerimizin rekabet avantajı elde etmesine destek vermektedir.
Her bir ürün sayfamızda, teknik detaylar, kullanım alanları ve ürün özelliklerine dair kapsamlı bilgilere ulaşabilirsiniz. Endüstriyel süreçlerinizi güçlendirmek için ihtiyacınız olan tüm ürünleri sitemizden keşfedebilir, sorunsuz bir satın alma deneyimi yaşayabilirsiniz.

Benzer Ürünler

DILMC80(RDC24)
Eaton
DILMC95(230V50HZ,240V60HZ)
Eaton
DILMC95(RDC24)
Eaton
DILMC115(RAC240)
Eaton
DILMC115(RDC24)
Eaton
DILMC150(RAC240)
Eaton
DILMC150(RDC24)
Eaton
SDAINLM70(230V50HZ,240V60HZ)
Eaton
SDAINLM90(230V50HZ,240V60HZ)
Eaton