alt
alt

DILA-XHIT11
101043 DILA-XHIT11
101043

Yardımcı kontak modülü, Tip: yüksek versiyon, 2 kutuplu, Ith= 16 A, 1 N/O, 1 NC, Önden sabitleme, Vidalı terminaller, MSC Karşılıklı kilitlemeli kontaklara sahip yardımcı kontak modülü, EN 50005'e göre anahtarlama elemanları, Versiyon E kombinasyonları EN 50011'e uygundur ve tercih edilmelidir., DC kumandalı kontaktör DILA(C)-22 yalnızca 2 kutuplu yardımcı kontaklarla birleştirilmelidir ., Fonksiyon: elektrik kablo bağlantılarıyla kombinasyon için, 2 kutuplu, Bağlantı tekniği: Vidalı terminaller, Nominal çalışma akımı AC-15 220 V 230 V 240 V: Ie= 4 A, Nominal çalışma akımı AC-15 380 V 400 V 415 V: Ie= 4 A, Kontaklar N/O = Normalde açık: 1 N/O, Kontaklar N/C = Normalde kapalı: 1 NC, Montaj tipi: Önden sabitleme, Şunlarla kullanım için: DILM7…, DILM9…, DILM12…, DILM15… , DILL…, MSC-D…M7(9, 12, 15)…, MSC-R…M7(9, 12), Tip: yüksek versiyon, Talimatlar: IEC/EN 60947-5-1 ekine göre kilitli karşılıklı kontaklar L, yardımcı kontak modüllerinin içinde, ayrıca DILM 7 - DILM32'nin entegre yardımcı kontakları için, IEC/EN 60947-4-1 Ek F'ye göre ayna kontakları olarak kullanılan yardımcı kontaklar (N/C geç açık değil)

Yardımcı kontak modülü, Tip: yüksek versiyon, 2 kutuplu, Ith= 16 A, 1 N/O, 1 NC, Önden sabitleme, Vidalı terminaller, MSC
Karşılıklı kilitlemeli kontaklara sahip yardımcı kontak modülü, EN 50005'e göre anahtarlama elemanları, Versiyon E kombinasyonları EN 50011'e uygundur ve tercih edilmelidir., DC kumandalı kontaktör DILA(C)-22 yalnızca 2 kutuplu yardımcı kontaklarla birleştirilmelidir ., Fonksiyon: elektrik kablo bağlantılarıyla kombinasyon için, 2 kutuplu, Bağlantı tekniği: Vidalı terminaller, Nominal çalışma akımı AC-15 220 V 230 V 240 V: Ie= 4 A, Nominal çalışma akımı AC-15 380 V 400 V 415 V: Ie= 4 A, Kontaklar N/O = Normalde açık: 1 N/O, Kontaklar N/C = Normalde kapalı: 1 NC, Montaj tipi: Önden sabitleme, Şunlarla kullanım için: DILM7…, DILM9…, DILM12…, DILM15… , DILL…, MSC-D…M7(9, 12, 15)…, MSC-R…M7(9, 12), Tip: yüksek versiyon, Talimatlar: IEC/EN 60947-5-1 ekine göre kilitli karşılıklı kontaklar L, yardımcı kontak modüllerinin içinde, ayrıca DILM 7 - DILM32'nin entegre yardımcı kontakları için, IEC/EN 60947-4-1 Ek F'ye göre ayna kontakları olarak kullanılan yardımcı kontaklar (N/C geç açık değil)

Accessories Auxiliary contact modules
Description with interlocked opposing contacts
Switching elements according to EN 50005
Version E combinations correspond to EN 50011 and are to be preferred.
The DC operated contactor DILA(C)-22 must only be combined with 2-pole auxiliary contacts.
Function for combination with electrical wiringlinks
Number of poles 2 pole
Connection technique Screw terminals
Conventional free air thermal current, 1 pole
>Open
>at 60 °C [Ith]
AC-15
>220 V 230 V 240 V [Ie]
16 A
AC-15
>380 V 400 V 415 V [Ie]
4 A
N/O = Normally open 4 A
N/C = Normally closed
Mounting type 1 N/O
Contact sequence 1 NC
For use with Front fixing
Type 210S033
Instructions DILM7…
DILM9…
DILM12…
DILM15…
DILL…
MSC-D…M7(9, 12, 15)…
MSC-R…M7(9, 12)
Standards high version
Component lifespan
>at Ue = 230 V, AC-15, 3 A [Operations]
Interlocked opposing contacts according to IEC/EN 60947-5-1 appendix L, inside the auxiliary contact modules, also for the integrated auxiliary contacts of the DILM 7 - DILM32
Auxiliary contacts used as mirror contacts according to IEC/EN 60947-4-1 Appendix F (not N/C late open)
Climatic proofing
Ambient temperature
>Open
IEC/EN 60947, VDE 0660, UL, CSA
Ambient temperature
>Enclosed
1.3 x 106
Ambient temperature
>Ambient temperature, storage
Damp heat, constant, to IEC 60068-2-78
Damp heat, cyclic, to IEC 60068-2-30
Mechanical shock resistance (IEC/EN 60068-2-27)
>Half-sinusoidal shock, 10 ms
>Basic unit with auxiliary contact module
>N/O contact
-25 - +60 °C
Mechanical shock resistance (IEC/EN 60068-2-27)
>Half-sinusoidal shock, 10 ms
>Basic unit with auxiliary contact module
>N/C contact
- 25 - 40 °C
Degree of Protection - 40 - 80 °C
Protection against direct contact when actuated from front (EN 50274) 7 g
Weight 5 g
Terminal capacities
>Screw terminals
>Solid
IP20
Terminal capacities
>Screw terminals
>Flexible with ferrule
Finger and back-of-hand proof
Terminal capacities
>Screw terminals
>Solid or stranded
0.039 kg
Terminal capacities
>Screw terminals
>Pozidriv screwdriver
1 x (0.75 - 2.5)
2 x (0.75 - 2.5) mm2
Terminal capacities
>Screw terminals
>Standard screwdriver
1 x (0.75 - 2.5)
2 x (0.75 - 2.5) mm2
Terminal capacities
>Screw terminals
>Max. tightening torque
18 – 14 AWG
Interlocked opposing contacts within an auxiliary contact module (to IEC 60947-5-1 Annex L) 2 Size
N/C contact (not late-break contact) suitable as a mirror contact (to IEC/EN 60947-4-1 Annex F) 0.8 x 5.5
1 x 6 mm
Rated impulse withstand voltage [Uimp] 1.2 Nm
Overvoltage category/pollution degree
Rated insulation voltage [Ui] Yes
Rated operational voltage [Ue] DILM7 - DILM15
Safe isolation to EN 61140
>between coil and auxiliary contacts
6000 V AC
Safe isolation to EN 61140
>between the auxiliary contacts
III/3
Rated operational current
>Conventional free air thermal current, 1 pole
>at 60 °C [Ith]
690 V AC
Rated operational current
>AC-15
>220 V 230 V 240 V [Ie]
500 V AC
Rated operational current
>AC-15
>380 V 400 V 415 V [Ie]
400 V AC
Rated operational current
>AC-15
>500 V [Ie]
400 V AC
Rated operational current
>DC current
16 A
Rated operational current
>DC current
>DC L/R ≦ 15 ms
>Contacts in series:
>1 [24 V]
4 A
Rated operational current
>DC current
>DC L/R ≦ 15 ms
>Contacts in series:
>1 [60 V]
4 A
Rated operational current
>DC current
>DC L/R ≦ 15 ms
>Contacts in series:
>1 [110 V]
1.5 A
Rated operational current
>DC current
>DC L/R ≦ 15 ms
>Contacts in series:
>1 [220 V]
Switch-on and switch-off conditions based on DC-13, time constant as specified.
Rated operational current
>DC current
>DC L/R ≦ 50 ms
>Contacts in series:
>3 [24 V]
10 A
Rated operational current
>DC current
>DC L/R ≦ 50 ms
>Contacts in series:
>3 [60 V]
6 A
Rated operational current
>DC current
>DC L/R ≦ 50 ms
>Contacts in series:
>3 [110 V]
3 A
Rated operational current
>DC current
>DC L/R ≦ 50 ms
>Contacts in series:
>3 [220 V]
1 A
Rated operational current
>DC current
>DC-13 (6xP)
>24 V [Ie ]
2.5 A
Rated operational current
>DC current
>DC-13 (6xP)
>60 V [Ie ]
1 A
Rated operational current
>DC current
>DC-13 (6xP)
>110 V [Ie ]
0.5 A
Rated operational current
>DC current
>DC-13 (6xP)
>220 V [Ie ]
0.25 A
Rated operational current
>Control circuit reliability [Failure rate]
2.5 A
Short-circuit rating without welding
>Short-circuit protection maximum fuse
>500 V
1 A
Current heat loss at Ith
>AC operated
0.5 A
Current heat loss at Ith
>DC operated
0.25 A
Current heat loss at Ith
>Current heat loss per auxiliary circuit at Ie (AC-15/230 V)
<10-8, < one failure at 100 million operations
(at Ue = 24 V DC, Umin = 17 V, Imin = 5.4 mA)
<5.3 x 10-8, < one failure in 19 millions operations
(at Ue = 24 V DC, Umin = 17 V, Imin = 1 mA) λ
Auxiliary contacts
>Pilot Duty
>AC operated
10 A gG/gL
Auxiliary contacts
>Pilot Duty
>DC operated
2.6 W
Auxiliary contacts
>General Use
>AC
2.6 W
Auxiliary contacts
>General Use
>AC
0.16 CO
Auxiliary contacts
>General Use
>DC
Auxiliary contacts
>General Use
>DC
A600
Rated operational current for specified heat dissipation [In] P300
Heat dissipation per pole, current-dependent [Pvid] 600 V
Equipment heat dissipation, current-dependent [Pvid] 10 A
Static heat dissipation, non-current-dependent [Pvs] 250 V
Heat dissipation capacity [Pdiss] 1 A
Operating ambient temperature min.
Operating ambient temperature max. 4 A
10.2 Strength of materials and parts
>10.2.2 Corrosion resistance
0.16 W
10.2 Strength of materials and parts
>10.2.3.1 Verification of thermal stability of enclosures
0 W
10.2 Strength of materials and parts
>10.2.3.2 Verification of resistance of insulating materials to normal heat
0 W
10.2 Strength of materials and parts
>10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects
0 W
10.2 Strength of materials and parts
>10.2.4 Resistance to ultra-violet (UV) radiation
-25 °C
10.2 Strength of materials and parts
>10.2.5 Lifting
+60 °C
10.2 Strength of materials and parts
>10.2.6 Mechanical impact
10.2 Strength of materials and parts
>10.2.7 Inscriptions
Meets the product standard´s requirements.
10.3 Degree of protection of ASSEMBLIES Meets the product standard´s requirements.
10.4 Clearances and creepage distances Meets the product standard´s requirements.
10.5 Protection against electric shock Meets the product standard´s requirements.
10.6 Incorporation of switching devices and components Meets the product standard´s requirements.
10.7 Internal electrical circuits and connections Does not apply, since the entire switchgear needs to be evaluated.
10.8 Connections for external conductors Does not apply, since the entire switchgear needs to be evaluated.
10.9 Insulation properties
>10.9.2 Power-frequency electric strength
Meets the product standard´s requirements.
10.9 Insulation properties
>10.9.3 Impulse withstand voltage
Does not apply, since the entire switchgear needs to be evaluated.
10.9 Insulation properties
>10.9.4 Testing of enclosures made of insulating material
Meets the product standard´s requirements.
10.10 Temperature rise Does not apply, since the entire switchgear needs to be evaluated.
10.11 Short-circuit rating Does not apply, since the entire switchgear needs to be evaluated.
10.12 Electromagnetic compatibility Is the panel builder´s responsibility.
10.13 Mechanical function Is the panel builder´s responsibility.
Number of contacts as change-over contact Is the panel builder´s responsibility.
Number of contacts as normally open contact Is the panel builder´s responsibility.
Number of contacts as normally closed contact Is the panel builder´s responsibility.
Number of fault-signal switches The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
Rated operation current Ie at AC-15, 230 V Is the panel builder´s responsibility. The specifications for the switchgear must be observed.
Type of electric connection Is the panel builder´s responsibility. The specifications for the switchgear must be observed.
Model The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
Mounting method
Lamp holder
Product Standards 0
UL File No. 1
UL Category Control No. 1
CSA File No. 0
CSA Class No. 4 A
North America Certification Screw connection
Specially designed for North America Top mounting
Accessories Front fastening

Mnelko olarak, endüstriyel otomasyon çözümlerinde güvenilir bir iş ortağı olarak, geniş ürün yelpazesi ile işletmenizin tüm ihtiyaçlarını karşılamaya yönelik kaliteli ve yenilikçi ürünler sunmaktayız. Ürün portföyümüz, modern endüstriyel süreçleri desteklemek amacıyla yüksek performans, dayanıklılık ve verimlilik ilkeleri doğrultusunda tasarlanmış çözümlerden oluşur.
Tüm ürünlerimiz, zorlu çalışma koşullarında dahi maksimum güvenilirlik sunar ve işletmenizin operasyonlarını sorunsuz şekilde sürdürmesine yardımcı olur. Endüstriyel otomasyon, enerji yönetimi, kablolama çözümleri ve daha birçok alanda sunduğumuz ürünler, farklı sektörlerdeki ihtiyaçlara esneklikle uyum sağlar.
Ayrıca, ürünlerimiz sadece kaliteli malzemelerle üretilmiş olup, uluslararası standartlara uygunluk göstermektedir. Müşterilerimize sunduğumuz çözümlerle, operasyonel verimliliklerini artırmalarına ve maliyetlerini optimize etmelerine olanak tanıyoruz. Teknolojik gelişmeleri yakından takip eden firmamız, sürekli olarak yenilikçi ürünler sunarak, müşterilerimizin rekabet avantajı elde etmesine destek vermektedir.
Her bir ürün sayfamızda, teknik detaylar, kullanım alanları ve ürün özelliklerine dair kapsamlı bilgilere ulaşabilirsiniz. Endüstriyel süreçlerinizi güçlendirmek için ihtiyacınız olan tüm ürünleri sitemizden keşfedebilir, sorunsuz bir satın alma deneyimi yaşayabilirsiniz.

Benzer Ürünler

DILMC80(RDC24)
Eaton
DILMC95(230V50HZ,240V60HZ)
Eaton
DILMC95(RDC24)
Eaton
DILMC115(RAC240)
Eaton
DILMC115(RDC24)
Eaton
DILMC150(RAC240)
Eaton
DILMC150(RDC24)
Eaton
SDAINLM70(230V50HZ,240V60HZ)
Eaton
SDAINLM90(230V50HZ,240V60HZ)
Eaton