DILA-XHIR22
139580 DILA-XHIR22
139580

Yardımcı kontak modülü, 4 kutuplu, Ith= 16 A, 2 N/O, 2 NC, Mikroswitch, Önden sabitleme, Vidalı terminaller, DILA, DILM7 - DILM38
Karşılıklı kilitlemeli kontaklara sahip yardımcı kontak modülü (mikro anahtarlar hariç), EN 50005'e göre anahtarlama elemanları, Versiyon E kombinasyonları EN 50011'e uygundur ve tercih edilmelidir., DC kumandalı kontaktör DILA(C)-22 yalnızca aşağıdakilerle birleştirilmelidir: 2 kutuplu yardımcı kontaklar., Fonksiyon: standart uygulamalar için, elektronik uygulamalar için, 4 kutuplu, Bağlantı tekniği: Vidalı terminaller, Nominal çalışma akımı AC-15 220 V 230 V 240 V: Ie= 4 A, Nominal çalışma akımı AC-15 380 V 400 V 415 V: Ie= 4 A, Kontaklar N/O = Normalde açık: 2 N/O (elektronik uygulamalar için mikroswitch'in üzerinde 1 N/O), Kontaklar N/C = Normalde kapalı: 2 NC (yukarıda 1 NC) elektronik uygulamalar için mikro anahtar), Montaj tipi: Önden sabitleme, Şunlarla kullanım için: DILA(C)…, DILM(C)7…, DILM(C)9…, DILM(C)12…, DILM(C)15…, DILM(C)17…, DILM(C)25…, DILM(C)32…, DILM38…, DILMP20…, DILMP32…, DILMP45…, DILL…, DILMF8…, DILMF11…, DILMF14…, DILMF17…, DILMF25… , DILMF32…, Tip: Önden montajlı yardımcı kontak, Talimatlar: IEC/EN 60947-5-1 Ek L'ye uygun olarak, birbirine kilitli karşılıklı kontaklara sahip geleneksel 63/64 N/O ve 71/72 N/C yardımcı kontaklar, dahili yardımcı kontak modülleri ve DILM 7 - DILM32 birimlerindeki entegre yardımcı kontaklar için (mikro anahtarlar değil), Tüm yardımcı N/K kontaklar (81/82 N/K mikro anahtarlar da) IEC/EN'de tanımlandığı gibi ayna kontak olarak kullanılabilir 60947-4-1 Ek F (NC geç devre dışı), Kod numarası ve kombinasyon versiyonu Ayırt edici numara: 51E, 42, 33

Accessories	Auxiliary contact modules
Description	with interlocked opposing contacts (except microswitches) Switching elements according to EN 50005 Version E combinations correspond to EN 50011 and are to be preferred. The DC operated contactor DILA(C)-22 must only be combined with 2-pole auxiliary contacts.
Function	for standard applications for electronic applications
Number of poles	4 pole
Connection technique	Screw terminals
Conventional free air thermal current, 1 pole >Open >at 60 °C [Ith]
AC-15 >220 V 230 V 240 V [Ie]	16 A
AC-15 >380 V 400 V 415 V [Ie]	4 A
N/O = Normally open	4 A
N/C = Normally closed
Mounting type	2 N/O (1 N/O above microswitch for electronic applications)
Contact sequence	2 NC (1 NC above microswitch for electronic applications)
For use with	Front fixing
Type
Instructions	DILA(C)… DILM(C)7… DILM(C)9… DILM(C)12… DILM(C)15… DILM(C)17… DILM(C)25… DILM(C)32… DILM38… DILMP20… DILMP32… DILMP45… DILL… DILMF8… DILMF11… DILMF14… DILMF17… DILMF25… DILMF32…
Distinctive number	Front mounting auxiliary contact
with basic device	Conventional 63/64 N/O and 71/72 N/C auxiliary contacts with interlocked opposing contacts, in accordance with IEC/EN 60947-5-1 Appendix L, inside the auxiliary contact modules and for the integrated auxiliary contacts in DILM 7 - DILM32 units (not microswitches) All auxiliary N/C contacts (81/82 N/C microswitches as well) can be used as a mirror contact as defined in IEC/EN 60947-4-1 Appendix F (not NC late-break)
with basic device
with basic device	51E
Standards	DILA(C)-40
Lifespan, mechanical >AC operated [Operations]	42
Lifespan, mechanical >DC operated [Operations]	DILA(C)-31
Component lifespan >at Ue = 230 V, AC-15, 3 A [Operations]	33
Maximum operating frequency [Operations/h]	DILA(C)-22
Climatic proofing
Ambient temperature >Open	IEC/EN 60947, VDE 0660, UL, CSA
Ambient temperature >Enclosed	10 x 106
Ambient temperature >Ambient temperature, storage	10 x 106
Mounting position >Mounting position	1.3 x 106
Mechanical shock resistance (IEC/EN 60068-2-27) >Half-sinusoidal shock, 10 ms >Basic unit with auxiliary contact module >N/O contact	9000
Mechanical shock resistance (IEC/EN 60068-2-27) >Half-sinusoidal shock, 10 ms >Basic unit with auxiliary contact module >N/C contact	Damp heat, constant, to IEC 60068-2-78 Damp heat, cyclic, to IEC 60068-2-30
Degree of Protection	-25 - +60 °C
Protection against direct contact when actuated from front (EN 50274)	- 25 - 40 °C
Weight	- 40 - 80 °C
Terminal capacities >Screw terminals >Solid
Terminal capacities >Screw terminals >Flexible with ferrule	7 g
Terminal capacities >Screw terminals >Solid or stranded	5 g
Terminal capacities >Screw terminals >Terminal screw	IP20
Terminal capacities >Screw terminals >Pozidriv screwdriver	Finger and back-of-hand proof
Terminal capacities >Screw terminals >Standard screwdriver	0.05 kg
Terminal capacities >Screw terminals >Max. tightening torque	1 x (0.75 - 2.5) 2 x (0.75 - 2.5) mm2
Interlocked opposing contacts within an auxiliary contact module (to IEC 60947-5-1 Annex L)	1 x (0.75 - 1.5) 2 x (0.75 - 1.5) mm2
N/C contact (not late-break contact) suitable as a mirror contact (to IEC/EN 60947-4-1 Annex F)	18 – 14 AWG
Rated impulse withstand voltage [Uimp]	M3.5
Overvoltage category/pollution degree	2 Size
Rated insulation voltage [Ui]	0.8 x 5.5 1 x 6 mm
Rated operational voltage [Ue]	1.2 Nm
Safe isolation to EN 61140 >between coil and auxiliary contacts
Safe isolation to EN 61140 >between the auxiliary contacts	Yes
Rated operational current >Conventional free air thermal current, 1 pole >at 60 °C [Ith]	DILM7 - DILM38
Rated operational current >AC-15 >220 V 230 V 240 V [Ie]	6000 V AC
Rated operational current >AC-15 >380 V 400 V 415 V [Ie]	III/3
Rated operational current >AC-15 >500 V [Ie]	690 V AC
Rated operational current >DC current	500 V AC
Rated operational current >DC current >DC L/R ≦ 15 ms >Contacts in series: >1 [24 V]	400 V AC
Rated operational current >DC current >DC L/R ≦ 15 ms >Contacts in series: >1 [60 V]	400 V AC
Rated operational current >DC current >DC L/R ≦ 15 ms >Contacts in series: >2 [60 V]	16 A
Rated operational current >DC current >DC L/R ≦ 15 ms >Contacts in series: >1 [110 V]	4 A
Rated operational current >DC current >DC L/R ≦ 15 ms >Contacts in series: >3 [110 V]	4 A
Rated operational current >DC current >DC L/R ≦ 15 ms >Contacts in series: >1 [220 V]	1.5 A
Rated operational current >DC current >DC L/R ≦ 15 ms >Contacts in series: >3 [220 V]	Switch-on and switch-off conditions based on DC-13, time constant as specified.
Rated operational current >DC current >DC L/R ≦ 50 ms >Contacts in series: >3 [24 V]	10 A
Rated operational current >DC current >DC L/R ≦ 50 ms >Contacts in series: >3 [60 V]	6 A
Rated operational current >DC current >DC L/R ≦ 50 ms >Contacts in series: >3 [110 V]	10 A
Rated operational current >DC current >DC L/R ≦ 50 ms >Contacts in series: >3 [220 V]	3 A
Rated operational current >DC current >DC-13 (6xP) >24 V [Ie ]	6 A
Rated operational current >DC current >DC-13 (6xP) >60 V [Ie ]	1 A
Rated operational current >DC current >DC-13 (6xP) >110 V [Ie ]	5 A
Rated operational current >DC current >DC-13 (6xP) >220 V [Ie ]	2.5 A
Rated operational current >Control circuit reliability [Failure rate]	1 A
Short-circuit rating without welding >Short-circuit protection maximum fuse >500 V	0.5 A
Current heat loss at Ith >AC operated	0.25 A
Current heat loss at Ith >DC operated	2.5 A
Current heat loss at Ith >Current heat loss per auxiliary circuit at Ie (AC-15/230 V)	1 A
Electrical specifications for microswitch auxiliary contacts 53-54 and 81-82 >Rated insulation voltage [Ui]	0.5 A
Electrical specifications for microswitch auxiliary contacts 53-54 and 81-82 >Rated operational voltage [Ue]	0.25 A
Electrical specifications for microswitch auxiliary contacts 53-54 and 81-82 >Rated operational voltage [Ue]	<10-8, < one failure at 100 million operations (at Ue = 24 V DC, Umin = 17 V, Imin = 5.4 mA) <5.3 x 10-8, < one failure in 19 millions operations (at Ue = 24 V DC, Umin = 17 V, Imin = 1 mA) λ
Electrical specifications for microswitch auxiliary contacts 53-54 and 81-82 >Rated operational current AC-12, 240 V [Ie]	10 A gG/gL
Electrical specifications for microswitch auxiliary contacts 53-54 and 81-82 >Rated operational current DC-12, 24 V [Ie]	2.6 W
Electrical specifications for microswitch auxiliary contacts 53-54 and 81-82 >Rated operational current DC-12, 60 V [Ie]	2.6 W
Electrical specifications for microswitch auxiliary contacts 53-54 and 81-82 >Conventional free air thermal current [Ith]	0.16 CO
Electrical specifications for microswitch auxiliary contacts 53-54 and 81-82 >Control circuit reliability [Failure rate]	250 V AC
Electrical specifications for microswitch auxiliary contacts 53-54 and 81-82 >Component lifespan at DC-12, 24 V / 50 mA [Operations]	250 V AC
Electrical specifications for microswitch auxiliary contacts 53-54 and 81-82 >Minimum voltage [Ue]	60 V DC
Electrical specifications for microswitch auxiliary contacts 53-54 and 81-82 >Minimum current [Ie]	0.1 A
Electrical specifications for microswitch auxiliary contacts 53-54 and 81-82 >Short-circuit rating without welding, max. fuse	0.5 A
Auxiliary contacts >General Use >DC	0.3 A
Auxiliary contacts >General Use >DC	0.5 A
Rated operational current for specified heat dissipation [In]	<10-8, < one failure at 100 million operations (at Ue = 24 V DC, Umin = 17 V, Imin = 1 mA) λ
Heat dissipation per pole, current-dependent [Pvid]	1.3 x 106
Equipment heat dissipation, current-dependent [Pvid]	3 V
Static heat dissipation, non-current-dependent [Pvs]	1 mA
Heat dissipation capacity [Pdiss]	1.6 A gG/gL
Operating ambient temperature min.
Operating ambient temperature max.	250 V
10.2 Strength of materials and parts >10.2.2 Corrosion resistance	0.1 A
10.2 Strength of materials and parts >10.2.3.1 Verification of thermal stability of enclosures
10.2 Strength of materials and parts >10.2.3.2 Verification of resistance of insulating materials to normal heat	4 A
10.2 Strength of materials and parts >10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects	0.16 W
10.2 Strength of materials and parts >10.2.4 Resistance to ultra-violet (UV) radiation	0 W
10.2 Strength of materials and parts >10.2.5 Lifting	0 W
10.2 Strength of materials and parts >10.2.6 Mechanical impact	0 W
10.2 Strength of materials and parts >10.2.7 Inscriptions	-25 °C
10.3 Degree of protection of ASSEMBLIES	+60 °C
10.4 Clearances and creepage distances
10.5 Protection against electric shock	Meets the product standard´s requirements.
10.6 Incorporation of switching devices and components	Meets the product standard´s requirements.
10.7 Internal electrical circuits and connections	Meets the product standard´s requirements.
10.8 Connections for external conductors	Meets the product standard´s requirements.
10.9 Insulation properties >10.9.2 Power-frequency electric strength	Meets the product standard´s requirements.
10.9 Insulation properties >10.9.3 Impulse withstand voltage	Does not apply, since the entire switchgear needs to be evaluated.
10.9 Insulation properties >10.9.4 Testing of enclosures made of insulating material	Does not apply, since the entire switchgear needs to be evaluated.
10.10 Temperature rise	Meets the product standard´s requirements.
10.11 Short-circuit rating	Does not apply, since the entire switchgear needs to be evaluated.
10.12 Electromagnetic compatibility	Meets the product standard´s requirements.
10.13 Mechanical function	Does not apply, since the entire switchgear needs to be evaluated.
Number of contacts as change-over contact	Does not apply, since the entire switchgear needs to be evaluated.
Number of contacts as normally open contact	Is the panel builder´s responsibility.
Number of contacts as normally closed contact	Is the panel builder´s responsibility.
Number of fault-signal switches	Is the panel builder´s responsibility.
Rated operation current Ie at AC-15, 230 V	Is the panel builder´s responsibility.
Type of electric connection	Is the panel builder´s responsibility.
Model	The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
Mounting method	Is the panel builder´s responsibility. The specifications for the switchgear must be observed.
Lamp holder	Is the panel builder´s responsibility. The specifications for the switchgear must be observed.
Product Standards	The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
UL File No.
UL Category Control No.
CSA File No.	0
CSA Class No.	2
North America Certification	2
Specially designed for North America	0

Mnelko olarak, endüstriyel otomasyon çözümlerinde güvenilir bir iş ortağı olarak, geniş ürün yelpazesi ile işletmenizin tüm ihtiyaçlarını karşılamaya yönelik kaliteli ve yenilikçi ürünler sunmaktayız. Ürün portföyümüz, modern endüstriyel süreçleri desteklemek amacıyla yüksek performans, dayanıklılık ve verimlilik ilkeleri doğrultusunda tasarlanmış çözümlerden oluşur.
Tüm ürünlerimiz, zorlu çalışma koşullarında dahi maksimum güvenilirlik sunar ve işletmenizin operasyonlarını sorunsuz şekilde sürdürmesine yardımcı olur. Endüstriyel otomasyon, enerji yönetimi, kablolama çözümleri ve daha birçok alanda sunduğumuz ürünler, farklı sektörlerdeki ihtiyaçlara esneklikle uyum sağlar.
Ayrıca, ürünlerimiz sadece kaliteli malzemelerle üretilmiş olup, uluslararası standartlara uygunluk göstermektedir. Müşterilerimize sunduğumuz çözümlerle, operasyonel verimliliklerini artırmalarına ve maliyetlerini optimize etmelerine olanak tanıyoruz. Teknolojik gelişmeleri yakından takip eden firmamız, sürekli olarak yenilikçi ürünler sunarak, müşterilerimizin rekabet avantajı elde etmesine destek vermektedir.
Her bir ürün sayfamızda, teknik detaylar, kullanım alanları ve ürün özelliklerine dair kapsamlı bilgilere ulaşabilirsiniz. Endüstriyel süreçlerinizi güçlendirmek için ihtiyacınız olan tüm ürünleri sitemizden keşfedebilir, sorunsuz bir satın alma deneyimi yaşayabilirsiniz.