Eaton : DILA-XHIC01-S
115951 DILA-XHIC01-S
DILA-XHIC01-S /115951
Yardımcı kontak modülü, 1 kutuplu, Ith= 16 A, 1 NC, Yana monteli, Yaylı terminaller, DILA, DILM7 - DILM15 Karşılıklı kilitlemeli kontaklara sahip yardımcı kontak modülü, EN 50005'e göre anahtarlama elemanları, Versiyon E kombinasyonları EN 50011'e uygundur ve tercih edilmelidir., DC kumandalı kontaktör DILA(C)-22 yalnızca 2 kutuplu yardımcı kontaklarla birleştirilmelidir ., Fonksiyon: standart uygulamalar için, 1 kutuplu, Bağlantı tekniği: Yaylı terminaller, Nominal çalışma akımı AC-15 220 V 230 V 240 V: Ie= 4 A, Nominal çalışma akımı AC-15 380 V 400 V 415 V: Ie= 4 A, Kontaklar N/C = Normalde kapalı: 1 NC, Montaj tipi: Yana monteli, Şunlarla kullanım için: DILMC7…, DILMC9…, DILMC12…, DILMC15…, DILAC…, Tip: Yandan montajlı yardımcı kontaklar, Talimatlar : IEC/EN 60947-5-1 ek L'ye göre kilitli karşılıklı kontaklar, yardımcı kontak modüllerinin içinde, ayrıca DILM 7 - DILM32'nin entegre yardımcı kontakları için, IEC/EN 60947-4'e göre ayna kontakları olarak kullanılan yardımcı kontaklar -1 Ek F (N/C geç açılmaz)
Yardımcı kontak modülü, 1 kutuplu, Ith= 16 A, 1 NC, Yana monteli, Yaylı terminaller, DILA, DILM7 - DILM15
Karşılıklı kilitlemeli kontaklara sahip yardımcı kontak modülü, EN 50005'e göre anahtarlama elemanları, Versiyon E kombinasyonları EN 50011'e uygundur ve tercih edilmelidir., DC kumandalı kontaktör DILA(C)-22 yalnızca 2 kutuplu yardımcı kontaklarla birleştirilmelidir ., Fonksiyon: standart uygulamalar için, 1 kutuplu, Bağlantı tekniği: Yaylı terminaller, Nominal çalışma akımı AC-15 220 V 230 V 240 V: Ie= 4 A, Nominal çalışma akımı AC-15 380 V 400 V 415 V: Ie= 4 A, Kontaklar N/C = Normalde kapalı: 1 NC, Montaj tipi: Yana monteli, Şunlarla kullanım için: DILMC7…, DILMC9…, DILMC12…, DILMC15…, DILAC…, Tip: Yandan montajlı yardımcı kontaklar, Talimatlar : IEC/EN 60947-5-1 ek L'ye göre kilitli karşılıklı kontaklar, yardımcı kontak modüllerinin içinde, ayrıca DILM 7 - DILM32'nin entegre yardımcı kontakları için, IEC/EN 60947-4'e göre ayna kontakları olarak kullanılan yardımcı kontaklar -1 Ek F (N/C geç açılmaz)
| Accessories | Auxiliary contact modules |
| Description | with interlocked opposing contacts Switching elements according to EN 50005 Version E combinations correspond to EN 50011 and are to be preferred. The DC operated contactor DILA(C)-22 must only be combined with 2-pole auxiliary contacts. |
| Function | for standard applications |
| Number of poles | 1 pole |
| Connection technique | Spring-loaded terminals |
| Conventional free air thermal current, 1 pole >Open >at 60 °C [Ith] |
|
| AC-15 >220 V 230 V 240 V [Ie] |
16 A |
| AC-15 >380 V 400 V 415 V [Ie] |
4 A |
| N/C = Normally closed | 4 A |
| Mounting type | |
| Contact sequence | 1 NC |
| For use with | Side mounted |
| Type | |
| Instructions | DILMC7… DILMC9… DILMC12… DILMC15… DILAC… |
| Standards | Side-mounting auxiliary contacts |
| Component lifespan >at Ue = 230 V, AC-15, 3 A [Operations] |
Interlocked opposing contacts according to IEC/EN 60947-5-1 appendix L, inside the auxiliary contact modules, also for the integrated auxiliary contacts of the DILM 7 - DILM32 Auxiliary contacts used as mirror contacts according to IEC/EN 60947-4-1 Appendix F (not N/C late open) |
| Climatic proofing | |
| Ambient temperature >Open |
IEC/EN 60947, VDE 0660, UL, CSA |
| Ambient temperature >Enclosed |
1.3 x 106 |
| Ambient temperature >Ambient temperature, storage |
Damp heat, constant, to IEC 60068-2-78 Damp heat, cyclic, to IEC 60068-2-30 |
| Degree of Protection | -25 - +60 °C |
| Protection against direct contact when actuated from front (EN 50274) | - 25 - 40 °C |
| Weight | - 40 - 80 °C |
| Terminal capacities >Spring-loaded terminals >Flexible with ferrule |
IP20 |
| Terminal capacities >Spring-loaded terminals >Solid or stranded |
Finger and back-of-hand proof |
| Terminal capacities >Spring-loaded terminals >Standard screwdriver |
0.02 kg |
| Interlocked opposing contacts within an auxiliary contact module (to IEC 60947-5-1 Annex L) | 1 x (0.75 - 1.5) 2 x (0.75 - 1.5) mm2 |
| N/C contact (not late-break contact) suitable as a mirror contact (to IEC/EN 60947-4-1 Annex F) | 18 – 14 AWG |
| Rated impulse withstand voltage [Uimp] | 0.6 x 3.5 mm |
| Overvoltage category/pollution degree | |
| Rated insulation voltage [Ui] | Yes |
| Rated operational voltage [Ue] | DILM7 - DILM15 |
| Safe isolation to EN 61140 >between coil and auxiliary contacts |
6000 V AC |
| Safe isolation to EN 61140 >between the auxiliary contacts |
III/3 |
| Rated operational current >Conventional free air thermal current, 1 pole >at 60 °C [Ith] |
690 V AC |
| Rated operational current >AC-15 >220 V 230 V 240 V [Ie] |
500 V AC |
| Rated operational current >AC-15 >380 V 400 V 415 V [Ie] |
400 V AC |
| Rated operational current >AC-15 >500 V [Ie] |
400 V AC |
| Rated operational current >DC current |
16 A |
| Rated operational current >DC current >DC L/R ≦ 15 ms >Contacts in series: >1 [24 V] |
4 A |
| Rated operational current >DC current >DC L/R ≦ 15 ms >Contacts in series: >1 [60 V] |
4 A |
| Rated operational current >DC current >DC L/R ≦ 15 ms >Contacts in series: >1 [110 V] |
1.5 A |
| Rated operational current >DC current >DC L/R ≦ 15 ms >Contacts in series: >1 [220 V] |
Switch-on and switch-off conditions based on DC-13, time constant as specified. |
| Rated operational current >DC current >DC-13 (6xP) >24 V [Ie ] |
10 A |
| Rated operational current >DC current >DC-13 (6xP) >60 V [Ie ] |
6 A |
| Rated operational current >DC current >DC-13 (6xP) >110 V [Ie ] |
3 A |
| Rated operational current >DC current >DC-13 (6xP) >220 V [Ie ] |
1 A |
| Rated operational current >Control circuit reliability [Failure rate] |
2.5 A |
| Short-circuit rating without welding >Short-circuit protection maximum fuse >500 V |
1 A |
| Current heat loss at Ith >AC operated |
0.5 A |
| Current heat loss at Ith >DC operated |
0.25 A |
| Current heat loss at Ith >Current heat loss per auxiliary circuit at Ie (AC-15/230 V) |
<10-8, < one failure at 100 million operations (at Ue = 24 V DC, Umin = 17 V, Imin = 5.4 mA) λ |
| Auxiliary contacts >Pilot Duty >AC operated |
10 A gG/gL |
| Auxiliary contacts >Pilot Duty >DC operated |
1.6 W |
| Auxiliary contacts >General Use >AC |
1.6 W |
| Auxiliary contacts >General Use >AC |
0.1 CO |
| Auxiliary contacts >General Use >DC |
|
| Auxiliary contacts >General Use >DC |
A600 |
| Rated operational current for specified heat dissipation [In] | P300 |
| Heat dissipation per pole, current-dependent [Pvid] | 600 V |
| Equipment heat dissipation, current-dependent [Pvid] | 10 A |
| Static heat dissipation, non-current-dependent [Pvs] | 250 V |
| Heat dissipation capacity [Pdiss] | 1 A |
| Operating ambient temperature min. | |
| Operating ambient temperature max. | 4 A |
| 10.2 Strength of materials and parts >10.2.2 Corrosion resistance |
0.1 W |
| 10.2 Strength of materials and parts >10.2.3.1 Verification of thermal stability of enclosures |
0 W |
| 10.2 Strength of materials and parts >10.2.3.2 Verification of resistance of insulating materials to normal heat |
0 W |
| 10.2 Strength of materials and parts >10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects |
0 W |
| 10.2 Strength of materials and parts >10.2.4 Resistance to ultra-violet (UV) radiation |
-25 °C |
| 10.2 Strength of materials and parts >10.2.5 Lifting |
+60 °C |
| 10.2 Strength of materials and parts >10.2.6 Mechanical impact |
|
| 10.2 Strength of materials and parts >10.2.7 Inscriptions |
Meets the product standard´s requirements. |
| 10.3 Degree of protection of ASSEMBLIES | Meets the product standard´s requirements. |
| 10.4 Clearances and creepage distances | Meets the product standard´s requirements. |
| 10.5 Protection against electric shock | Meets the product standard´s requirements. |
| 10.6 Incorporation of switching devices and components | Meets the product standard´s requirements. |
| 10.7 Internal electrical circuits and connections | Does not apply, since the entire switchgear needs to be evaluated. |
| 10.8 Connections for external conductors | Does not apply, since the entire switchgear needs to be evaluated. |
| 10.9 Insulation properties >10.9.2 Power-frequency electric strength |
Meets the product standard´s requirements. |
| 10.9 Insulation properties >10.9.3 Impulse withstand voltage |
Does not apply, since the entire switchgear needs to be evaluated. |
| 10.9 Insulation properties >10.9.4 Testing of enclosures made of insulating material |
Meets the product standard´s requirements. |
| 10.10 Temperature rise | Does not apply, since the entire switchgear needs to be evaluated. |
| 10.11 Short-circuit rating | Does not apply, since the entire switchgear needs to be evaluated. |
| 10.12 Electromagnetic compatibility | Is the panel builder´s responsibility. |
| 10.13 Mechanical function | Is the panel builder´s responsibility. |
| Number of contacts as change-over contact | Is the panel builder´s responsibility. |
| Number of contacts as normally open contact | Is the panel builder´s responsibility. |
| Number of contacts as normally closed contact | Is the panel builder´s responsibility. |
| Number of fault-signal switches | The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices. |
| Rated operation current Ie at AC-15, 230 V | Is the panel builder´s responsibility. The specifications for the switchgear must be observed. |
| Type of electric connection | Is the panel builder´s responsibility. The specifications for the switchgear must be observed. |
| Model | The device meets the requirements, provided the information in the instruction leaflet (IL) is observed. |
| Mounting method | |
| Lamp holder | |
| Product Standards | 0 |
| UL File No. | 0 |
| UL Category Control No. | 1 |
| CSA File No. | 0 |
| CSA Class No. | 4 A |
| North America Certification | Spring clamp connection |
| Specially designed for North America | Top mounting |
Tüm ürünlerimiz, zorlu çalışma koşullarında dahi maksimum güvenilirlik sunar ve işletmenizin operasyonlarını sorunsuz şekilde sürdürmesine yardımcı olur. Endüstriyel otomasyon, enerji yönetimi, kablolama çözümleri ve daha birçok alanda sunduğumuz ürünler, farklı sektörlerdeki ihtiyaçlara esneklikle uyum sağlar.
Ayrıca, ürünlerimiz sadece kaliteli malzemelerle üretilmiş olup, uluslararası standartlara uygunluk göstermektedir. Müşterilerimize sunduğumuz çözümlerle, operasyonel verimliliklerini artırmalarına ve maliyetlerini optimize etmelerine olanak tanıyoruz. Teknolojik gelişmeleri yakından takip eden firmamız, sürekli olarak yenilikçi ürünler sunarak, müşterilerimizin rekabet avantajı elde etmesine destek vermektedir.
Her bir ürün sayfamızda, teknik detaylar, kullanım alanları ve ürün özelliklerine dair kapsamlı bilgilere ulaşabilirsiniz. Endüstriyel süreçlerinizi güçlendirmek için ihtiyacınız olan tüm ürünleri sitemizden keşfedebilir, sorunsuz bir satın alma deneyimi yaşayabilirsiniz.
Benzer Ürünler
Aradığınız ürünü bulamıyor musunuz?
SÄ°ZE YARDIMCI OLALIM
Aradığınız Ürünü Bulamadınız mı? Bize Bildirin, Sizin İçin Tedarik Edelim!
Web sitemizde yer almayan ya da stokta bulunmayan ürünleri mi arıyorsunuz? İhtiyacınızı bize bildirin, uzman ekibimiz en kısa sürede sizinle iletişime geçerek size en uygun çözümü bulsun.
