Variable frequency drive, 230 V AC, 3-phase, 24 A, 5.5 kW, IP55/NEMA 12, Radio interference suppression filter, OLED displayVariable frequency drive, Part group reference (e.g. DIL): DA1, Rated operational voltage: Ue = 230 V AC, 3-phase, 240 V AC, 3-phase, Output voltage with Ve: U2 = 230 V AC, 3-phase, 240 V AC, 3-phase, Mains voltage (50/60Hz): ULN = 200 (-10%) - 240 (+10%) V, Rated operational current At 150% overload: Ie = 24 A, Note: Rated operational current at a switching frequency of 8 kHz and an ambient air temperature of +40 °C, Note: Overload cycle for 60 s every 600 s, Assigned motor rating Note: for normal internally and externally ventilated 4 pole, three-phase asynchronous motors with 1500 rpm-1 at 50 Hz or 1800 min-1 at 60 Hz, Overload cycle for 60 s every 600 s, at 230 V, 50 Hz, Assigned motor rating 150 % Overload: P = 5.5 kW, 150 % Overload: IM = 19.6 A, Assigned motor rating Note: at 220 - 240 V, 60 Hz, Assigned motor rating 150 % Overload: P = 7.5 HP, Assigned motor rating 150 % Overload: IM = 22 A, Degree of Protection: IP55/NEMA 12, Interface/field bus (built-in): OP-Bus (RS485)/Modbus RTU, CANopen®, Fieldbus connection (optional): Ethernet IP, DeviceNet, PROFIBUS, PROFINET, Modbus-TCP, EtherCAT, SmartWire-DT, Fitted with: Radio interference suppression filter, Brake chopper, Additional PCB protection, OLED display, Frame size: FS4, Standards: Specification for general requirements: IEC/EN 61800-2, EMC requirements: IEC/EN 61800-3, Safety requirements: IEC/EN 61800-5-1
Variable frequency drive, 230 V AC, 3-phase, 24 A, 5.5 kW, IP55/NEMA 12, Radio interference suppression filter, OLED display
Variable frequency drive, Part group reference (e.g. DIL): DA1, Rated operational voltage: Ue = 230 V AC, 3-phase, 240 V AC, 3-phase, Output voltage with Ve: U2 = 230 V AC, 3-phase, 240 V AC, 3-phase, Mains voltage (50/60Hz): ULN = 200 (-10%) - 240 (+10%) V, Rated operational current At 150% overload: Ie = 24 A, Note: Rated operational current at a switching frequency of 8 kHz and an ambient air temperature of +40 °C, Note: Overload cycle for 60 s every 600 s, Assigned motor rating Note: for normal internally and externally ventilated 4 pole, three-phase asynchronous motors with 1500 rpm-1 at 50 Hz or 1800 min-1 at 60 Hz, Overload cycle for 60 s every 600 s, at 230 V, 50 Hz, Assigned motor rating 150 % Overload: P = 5.5 kW, 150 % Overload: IM = 19.6 A, Assigned motor rating Note: at 220 - 240 V, 60 Hz, Assigned motor rating 150 % Overload: P = 7.5 HP, Assigned motor rating 150 % Overload: IM = 22 A, Degree of Protection: IP55/NEMA 12, Interface/field bus (built-in): OP-Bus (RS485)/Modbus RTU, CANopen®, Fieldbus connection (optional): Ethernet IP, DeviceNet, PROFIBUS, PROFINET, Modbus-TCP, EtherCAT, SmartWire-DT, Fitted with: Radio interference suppression filter, Brake chopper, Additional PCB protection, OLED display, Frame size: FS4, Standards: Specification for general requirements: IEC/EN 61800-2, EMC requirements: IEC/EN 61800-3, Safety requirements: IEC/EN 61800-5-1
Product range | Variable frequency drives |
Part group reference (e.g. DIL) | DA1 |
Rated operational voltage [Ue] | 230 V AC, 3-phase 240 V AC, 3-phase |
Output voltage with Ve [U2] | 230 V AC, 3-phase 240 V AC, 3-phase |
Mains voltage (50/60Hz) [ULN] | 200 (-10%) - 240 (+10%) V |
At 150% overload [Ie] | |
Note | 24 A |
Note | Rated operational current at a switching frequency of 8 kHz and an ambient air temperature of +40 °C |
Note | |
Note | for normal internally and externally ventilated 4 pole, three-phase asynchronous motors with 1500 rpm-1 at 50 Hz or 1800 min-1 at 60 Hz |
150 % Overload [P] | Overload cycle for 60 s every 600 s |
150 % Overload [IM] | at 230 V, 50 Hz |
Note | 5.5 kW |
150 % Overload [P] | 19.6 A |
150 % Overload [IM] | at 220 - 240 V, 60 Hz |
Degree of Protection | 7.5 HP |
Interface/field bus (built-in) | 22 A |
Fieldbus connection (optional) | IP55/NEMA 12 |
Fitted with | OP-Bus (RS485)/Modbus RTU, CANopen® |
Parameterization | Ethernet IP DeviceNet PROFIBUS PROFINET Modbus-TCP EtherCAT SmartWire-DT |
Frame size | Radio interference suppression filter Brake chopper Additional PCB protection OLED display |
Connection to SmartWire-DT | Keypad Fieldbus drivesConnect drivesConnect mobile (App) |
Standards | FS4 |
Certifications | yes in conjunction with DX-NET-SWD1 SmartWire DT module |
Approvals | |
Production quality | Specification for general requirements: IEC/EN 61800-2 EMC requirements: IEC/EN 61800-3 Safety requirements: IEC/EN 61800-5-1 |
Climatic proofing [ρw] | CE, UL, cUL, RCM, UkrSEPRO, EAC |
Air quality | DNV |
Ambient temperature >Operating ambient temperature min. |
RoHS, ISO 9001 |
Ambient temperature >Operating ambient temperature max. |
< 95%, average relative humidity (RH), non-condensing, non-corrosive % |
Ambient temperature | 3C3, 3S3 |
Ambient temperature >Storage [ϑ] |
-10 °C |
Radio interference level >Radio interference class (EMC) |
+40 °C |
Radio interference level >Environment (EMC) |
operation (with 150 % overload) |
Radio interference level >maximum motor cable length [I] |
-40 - +60 °C |
Mounting position | C2, C3, depending on the motor cable length, the connected load, and ambient conditions. External radio interference suppression filters (optional) may be necessary. |
Altitude | 1st and 2nd environments as per EN 61800-3 |
Degree of Protection | C2 ≤ 5 m C3 ≤ 25 m m |
Protection against direct contact | Vertical |
Supply >Rated operational voltage [Ue] |
0 - 1000 m above sea level Above 1000 m: 1% derating for every 100 m max. 4000 m m |
Supply >Mains voltage (50/60Hz) [ULN] |
IP55/NEMA 12 |
Supply >Input current (150% overload) [ILN] |
BGV A3 (VBG4, finger- and back-of-hand proof) |
Supply >System configuration |
|
Supply >Supply frequency [fLN] |
230 V AC, 3-phase 240 V AC, 3-phase |
Supply >Frequency range [fLN] |
200 (-10%) - 240 (+10%) V |
Supply >Mains switch-on frequency |
26.9 A |
Power section >Function |
AC supply systems with earthed center point |
Power section >Overload current (150% overload) [IL] |
50/60 Hz |
Power section >max. starting current (High Overload) [IH] |
48 - 62 Hz |
Power section >Note about max. starting current |
Maximum of one time every 30 seconds |
Power section >Output voltage with Ve [U2] |
Variable frequency drive with internal DC link and IGBT inverter |
Power section >Output Frequency [f2] |
36 A |
Power section >Switching frequency [fPWM] |
200 % |
Power section >Operation Mode |
for 4 seconds every 40 seconds |
Power section >Frequency resolution (setpoint value) [Δf] |
230 V AC, 3-phase 240 V AC, 3-phase |
Power section >Rated operational current >At 150% overload [Ie] |
0 - 50/60 (max. 500) Hz |
Power section >Note |
8 adjustable 4 - 24 (audible) kHz |
Power section >Power loss >Heat dissipation at rated operational current Ie =150 % [PV] |
U/f control Speed control with slip compensation sensorless vector control (SLV) optional: Vector control with feedback (CLV) |
Power section >Efficiency [η] |
0.1 Hz |
Power section >Maximum leakage current to ground (PE) without motor [IPE] |
24 A |
Power section >Fitted with |
Rated operational current at a switching frequency of 8 kHz and an ambient air temperature of +40 °C |
Power section >Safety function |
170.5 W |
Power section >Frame size |
96.9 % |
Motor feeder >Note |
1.42 mA |
Motor feeder >Note |
Radio interference suppression filter Brake chopper Additional PCB protection OLED display |
Motor feeder >Note |
STO (Safe Torque Off, SIL2, PLd Cat 3) |
Motor feeder >150 % Overload [P] |
FS4 |
Motor feeder >Note |
for normal internally and externally ventilated 4 pole, three-phase asynchronous motors with 1500 rpm-1 at 50 Hz or 1800 min-1 at 60 Hz |
Motor feeder >150 % Overload [P] |
Overload cycle for 60 s every 600 s |
Motor feeder >maximum permissible cable length [I] |
at 230 V, 50 Hz |
Motor feeder >Apparent power >Apparent power at rated operation 230 V [S] |
5.5 kW |
Motor feeder >Apparent power >Apparent power at rated operation 240 V [S] |
at 220 - 240 V, 60 Hz |
Motor feeder >Braking function >Standard braking torque |
7.5 HP |
Motor feeder >Braking function >DC braking torque |
screened: 100 screened, with motor choke: 200 unscreened: 150 unscreened, with motor choke: 300 m |
Motor feeder >Braking function >Braking torque with external braking resistance |
9.56 kVA |
Motor feeder >Braking function >minimum external braking resistance [Rmin] |
9.98 kVA |
Motor feeder >Braking function >Switch-on threshold for the braking transistor [UDC] |
max. 30 % MN |
External control voltage [Uc] | max. 100% of rated operational current Ie, variable |
Reference voltage [Us] | Max. 100% of rated operational current Ie with external braking resistor |
Analog inputs | 20 Ω |
Analog outputs | 390 V DC V |
Digital inputs | |
Digital outputs | 24 V DC (max. 100 mA) V |
Relay outputs | 10 V DC (max. 10 mA) V |
Interface/field bus (built-in) | 2, parameterizable, 0 - 10 V DC, 0/4 - 20 mA |
Power Wiring >Safety device (fuse or miniature circuit-breaker) >IEC (Type B, gG), 150 % |
2, parameterizable, 0 - 10 V, 0/4 - 20 mA |
Power Wiring >Safety device (fuse or miniature circuit-breaker) >UL (Class CC or J) |
3, parameterizable, max. 30 VDC, max. 5 for non-parameterized analog inputs |
Power Wiring >Mains contactor >150 % overload (CT/IH, at 50 °C) |
2, parameterizable, 24 V DC |
Power Wiring >Main choke >150 % overload (CT/IH, at 50 °C) |
2, parameterizable, 1 N/O and 1 changeover contact, 6 A (250 V, AC-1) / 5 A (30 V, DC-1) |
Power Wiring >Radio interference suppression filter (external, 150 %) |
OP-Bus (RS485)/Modbus RTU, CANopen® |
Power Wiring >Radio interference suppression filter, low leakage currents (external, 150 %) |
|
Power Wiring >Note regarding radio interference suppression filter |
FAZ-B40/3 |
DC link connection >Braking resistance >10 % duty factor (DF) |
40 A |
DC link connection >Braking resistance >20 % duty factor (DF) |
DILM17 |
DC link connection >Braking resistance >40 % duty factor (DF) |
DX-LN3-025 |
DC link connection >Braking resistance >Notes concerning braking resistances: |
DX-EMC34-030 |
Motor feeder >motor choke >150 % overload (CT/IH, at 50 °C) |
DX-EMC34-030-L |
Motor feeder >Sine filter >150 % overload (CT/IH, at 50 °C) |
Optional external radio interference suppression filter for longer motor cable lengths and for use in different EMC environments |
Motor feeder >All-pole sine filter >150 % overload (CT/IH, at 50 °C) |
DX-BR022-1K4 |
Rated operational current for specified heat dissipation [In] | DX-BR022-3K1 |
Heat dissipation per pole, current-dependent [Pvid] | DX-BR022-5K1 |
Equipment heat dissipation, current-dependent [Pvid] | The brake resistors are assigned based on the maximum rated power of the variable frequency drive. Additional brake resistors and designs (e.g. different duty cycles) are available upon request. |
Static heat dissipation, non-current-dependent [Pvs] | DX-LM3-035 |
Heat dissipation capacity [Pdiss] | DX-SIN3-032 |
Operating ambient temperature min. | DX-SIN3-024-A |
Operating ambient temperature max. | |
10.2 Strength of materials and parts >10.2.2 Corrosion resistance |
24 A |
10.2 Strength of materials and parts >10.2.3.1 Verification of thermal stability of enclosures |
0 W |
10.2 Strength of materials and parts >10.2.3.2 Verification of resistance of insulating materials to normal heat |
170.5 W |
10.2 Strength of materials and parts >10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects |
0 W |
10.2 Strength of materials and parts >10.2.4 Resistance to ultra-violet (UV) radiation |
0 W |
10.2 Strength of materials and parts >10.2.5 Lifting |
-10 °C |
10.2 Strength of materials and parts >10.2.6 Mechanical impact |
+40 °C |
10.2 Strength of materials and parts >10.2.7 Inscriptions |
|
10.3 Degree of protection of ASSEMBLIES | Meets the product standard´s requirements. |
10.4 Clearances and creepage distances | Meets the product standard´s requirements. |
10.5 Protection against electric shock | Meets the product standard´s requirements. |
10.6 Incorporation of switching devices and components | Meets the product standard´s requirements. |
10.7 Internal electrical circuits and connections | Meets the product standard´s requirements. |
10.8 Connections for external conductors | Does not apply, since the entire switchgear needs to be evaluated. |
10.9 Insulation properties >10.9.2 Power-frequency electric strength |
Does not apply, since the entire switchgear needs to be evaluated. |
10.9 Insulation properties >10.9.3 Impulse withstand voltage |
Meets the product standard´s requirements. |
10.9 Insulation properties >10.9.4 Testing of enclosures made of insulating material |
Does not apply, since the entire switchgear needs to be evaluated. |
10.10 Temperature rise | Meets the product standard´s requirements. |
10.11 Short-circuit rating | Does not apply, since the entire switchgear needs to be evaluated. |
10.12 Electromagnetic compatibility | Does not apply, since the entire switchgear needs to be evaluated. |
10.13 Mechanical function | Is the panel builder´s responsibility. |
Mains voltage | Is the panel builder´s responsibility. |
Mains frequency | Is the panel builder´s responsibility. |
Number of phases input | Is the panel builder´s responsibility. |
Number of phases output | Is the panel builder´s responsibility. |
Max. output frequency | The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices. |
Max. output voltage | Is the panel builder´s responsibility. The specifications for the switchgear must be observed. |
Nominal output current I2N | Is the panel builder´s responsibility. The specifications for the switchgear must be observed. |
Max. output at quadratic load at rated output voltage | The device meets the requirements, provided the information in the instruction leaflet (IL) is observed. |
Max. output at linear load at rated output voltage | |
Relative symmetric net frequency tolerance | |
Relative symmetric net voltage tolerance | 180 - 264 V |
Number of analogue outputs | 50/60 Hz |
Number of analogue inputs | 3 |
Number of digital outputs | 3 |
Number of digital inputs | 500 Hz |
With control unit | 250 V |
Application in industrial area permitted | 24 A |
Application in domestic- and commercial area permitted | 5.5 kW |
Supporting protocol for TCP/IP | 5.5 kW |
Supporting protocol for PROFIBUS | 10 % |
Supporting protocol for CAN | 10 % |
Supporting protocol for INTERBUS | 2 |
Supporting protocol for ASI | 2 |
Supporting protocol for KNX | 2 |
Supporting protocol for MODBUS | 5 |
Supporting protocol for Data-Highway | Yes |
Supporting protocol for DeviceNet | Yes |
Supporting protocol for SUCONET | Yes |
Supporting protocol for LON | Yes |
Supporting protocol for PROFINET IO | Yes |
Supporting protocol for PROFINET CBA | Yes |
Supporting protocol for SERCOS | No |
Supporting protocol for Foundation Fieldbus | No |
Supporting protocol for EtherNet/IP | No |
Supporting protocol for AS-Interface Safety at Work | Yes |
Supporting protocol for DeviceNet Safety | No |
Supporting protocol for INTERBUS-Safety | Yes |
Supporting protocol for PROFIsafe | No |
Supporting protocol for SafetyBUS p | No |
Supporting protocol for BACnet | Yes |
Supporting protocol for other bus systems | No |
Number of HW-interfaces industrial Ethernet | No |
Number of interfaces PROFINET | No |
Number of HW-interfaces RS-232 | Yes |
Number of HW-interfaces RS-422 | No |
Number of HW-interfaces RS-485 | No |
Number of HW-interfaces serial TTY | No |
Number of HW-interfaces USB | No |
Number of HW-interfaces parallel | No |
Number of HW-interfaces other | Yes |
With optical interface | Yes |
With PC connection | 0 |
Integrated breaking resistance | 0 |
4-quadrant operation possible | 0 |
Type of converter | 0 |
Degree of protection (IP) | 1 |
Degree of protection (NEMA) | 0 |
Height | 0 |
Width | 0 |
Depth | 0 |
Product Standards | No |
UL File No. | Yes |
UL Category Control No. | Yes |
CSA File No. | Yes |
North America Certification | U converter |
Specially designed for North America | IP55 |
Suitable for | 12 |
Max. Voltage Rating | 450 mm |
Degree of Protection | 173 mm |