alt
alt

CS-75/200
111702 CS-75/200
111702

Duvar muhafazası, +montaj plakası, YxGxD=700x500x200mm Duvara montaj muhafaza CS, sürekli köpüklü poliüretan contalı kapı, EN 62262'ye göre darbeye dayanıklılık kategorisi IK09, köpüklü contalı alt plaka, derin çekme alanında conta korumalı, tek kapı, kapı menteşeleri sağ, açılma açısı 120°, kapı hızlı değiştirme teknolojisine sahip menteşe pimleri, DIN montaj raylarını sabitlemek veya kablo kanallarını ve kablolarını sabitlemek için 25 mm aralıklarla delikli kapı profili kalıplaması, kanat bağlantılı standart kilitleme sistemi. tamamen metalden yapılmış, çelik sac montaj plakalı, birlikte verilen ekipman: kilit, 3 mm çift bölmeli anahtar hassas aksesuar ekipmanı örn. Silindir kilitli PHZ-A-ADD-ON döner konforlu kavrama PHZ-E10/30-GS.

Duvar muhafazası, +montaj plakası, YxGxD=700x500x200mm
Duvara montaj muhafaza CS, sürekli köpüklü poliüretan contalı kapı, EN 62262'ye göre darbeye dayanıklılık kategorisi IK09, köpüklü contalı alt plaka, derin çekme alanında conta korumalı, tek kapı, kapı menteşeleri sağ, açılma açısı 120°, kapı hızlı değiştirme teknolojisine sahip menteşe pimleri, DIN montaj raylarını sabitlemek veya kablo kanallarını ve kablolarını sabitlemek için 25 mm aralıklarla delikli kapı profili kalıplaması, kanat bağlantılı standart kilitleme sistemi. tamamen metalden yapılmış, çelik sac montaj plakalı, birlikte verilen ekipman: kilit, 3 mm çift bölmeli anahtar hassas aksesuar ekipmanı örn. Silindir kilitli PHZ-A-ADD-ON döner konforlu kavrama PHZ-E10/30-GS.

Product range Wall-mounting housing CS
Product function Wall-mounting housing with mounting plate
Degree of Protection IP66
IP23 (with ventilating plates)
Description Foamed polyurethane sealing throughout.
Impact resistance category IK09 to EN 62262.
Sheet steel mounting plate
Bottom plate with foamed gasket.
Single door, door stop on the right, door opening angle 120°
Door hinge pins with quick change technology.
Standardized locking system with sash fastener.
Powder coating RAL 7035 inside and outside
Material Steel plate
Width 500 mm
Height 700 mm
Depth 200 mm
Locks [Number] 2
Hinges [Number] 2
Door profile molding [Number] 2
Flange plates [Width x Depth] 172 x 432 mm
Max. F3A flanges [Number] 1
Height 670 mm
Width 450 mm
Weight 21.1 kg
Information about equipment supplied Lock, 3 mm double ward key
Including M6 threaded welded studs for earth conductor connections in the door
Standards IEC/EN 60529, IEC 62262, IEC/EN 62208
RoHS In accordance with Directive 2002/95/EC of the European Parliament and Council
RoHS (in accordance with Directive 2002/95/EC of the European Parliament and Council) yes
Climatic proofing Damp heat, constant, to IEC 60068-2-78; Damp heat, cyclical, to IEC 60068-2-30
Ambient temperature -40 - +70 °C
Degree of Protection IP66
IP23 (with ventilating plates)
Installation conditions Indoor-/outdoor installation
Power loss Power loss Pv [W] for fully enclosed sheet steel enclosure CS without internal partitions for wall mounting.
Example: max. ambient temperature 35°C; Overtemperature ΔT = 20 K; Relative humidity = 75%.
Power loss
>Max. heat dissipation
>Individual enclosure for wall mounting [PV]
53 W
Power loss
>Max. heat dissipation
>Starting enclosure for wall mounting [PV]
50 W
Power loss
>Max. heat dissipation
>Middle enclosure for wall mounting [PV]
47 W
Material Steel plate
Surface treatment Structured powder spray polyester based paint finish
Surface finish Semi-textured
Colour light gray (RAL 7035)
Finish Gloss
Material thickness
>Body
1.5 mm
Material thickness
>Mounting plate
2 mm
Material thickness
>Door
1.5 mm
Material thickness
>Bottom plate
1.5 mm
Mechanical
>Impact resistance
IK09 according to EN 62262
Mechanical
>max. assembly weights
>Total of Weight of fitted components
275 kg
Mechanical
>max. assembly weights
>Mounting plate
250 kg
Mechanical
>max. assembly weights
>Door
25 kg
Mechanical
>max. assembly weights
500 kg payload, when brackets fitted in all four enclosure corners (vertically or horizontally) and the weights are symmetrically distributed within the enclosure.
Construction Canted and seam welded, including two M6 threaded bolts for earth conductor connections inside the enclosure.
Back plate 9 mm drilling dimensions for wall mounting
Side plates Without apertures
Top plate Without apertures
Bottom plate Enclosed, foamed gasket, can be unscrewed for F3A-… flanges or for assembly by user
Mounting plate, material Sheet steel, hot-galvanized
Door, Engineering Including M6 threaded welded studs for earth conductor connections in the door:
Information about equipment supplied Lock, 3 mm double ward key
Including M6 threaded welded studs for earth conductor connections in the door
Door hinges If electrical apparatus is to be installed in the door, a continuous, permanent protective ground contactor connection must be established with a protective ground cable. The threaded welded studs on the door and on the cabinet side wall must be used as connecting points for the ground leads.
Type Door On the right, can be converted by user
door opening angle Door hinges right
can be converted by user
Door interlock 120°
Locks [Number] Protection insulated turn-buckle
Standard closure 3 mm double-ward key
Heat dissipation, at an ambient temperature of 35°C, delta T: 20 degrees in top of the enclosure, calculated as per IEC 60890
>Individual enclosure for wall mounting [PV]
2
Heat dissipation, at an ambient temperature of 35°C, delta T: 20 degrees in top of the enclosure, calculated as per IEC 60890
>Starting enclosure for wall mounting [PV]
52 W
Heat dissipation, at an ambient temperature of 35°C, delta T: 20 degrees in top of the enclosure, calculated as per IEC 60890
>Middle enclosure for wall mounting [PV]
49 W
Heat dissipation, at an ambient temperature of 35°C, delta T: 35 degrees in top of the enclosure, calculated as per IEC 60890
>Individual enclosure for wall mounting [PV]
46 W
Heat dissipation, at an ambient temperature of 35°C, delta T: 35 degrees in top of the enclosure, calculated as per IEC 60890
>Starting enclosure for wall mounting [PV]
105 W
Heat dissipation, at an ambient temperature of 35°C, delta T: 35 degrees in top of the enclosure, calculated as per IEC 60890
>Middle enclosure for wall mounting [PV]
99 W
10.2 Strength of materials and parts
>10.2.2 Corrosion resistance
93 W
10.2 Strength of materials and parts
>10.2.3.1 Verification of thermal stability of enclosures
Meets the product standard´s requirements.
10.2 Strength of materials and parts
>10.2.3.2 Verification of resistance of insulating materials to normal heat
Meets the product standard´s requirements.
10.2 Strength of materials and parts
>10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects
Meets the product standard´s requirements.
10.2 Strength of materials and parts
>10.2.4 Resistance to ultra-violet (UV) radiation
Meets the product standard´s requirements.
10.2 Strength of materials and parts
>10.2.5 Lifting
Meets the product standard´s requirements.
10.2 Strength of materials and parts
>10.2.6 Mechanical impact
Does not apply to enclosures without lifting aids.
10.2 Strength of materials and parts
>10.2.7 Inscriptions
IK09
10.3 Degree of protection of ASSEMBLIES Meets the product standard´s requirements.
10.4 Clearances and creepage distances IP66_x
10.5 Protection against electric shock Is the panel builder´s responsibility.
10.6 Incorporation of switching devices and components < 0.1 Ω; meets the product standard´s requirements.
10.7 Internal electrical circuits and connections Is the panel builder´s responsibility.
10.8 Connections for external conductors Is the panel builder´s responsibility.
10.9 Insulation properties
>10.9.2 Power-frequency electric strength
Is the panel builder´s responsibility.
10.9 Insulation properties
>10.9.3 Impulse withstand voltage
Ui = 1000 V AC
10.9 Insulation properties
>10.9.4 Testing of enclosures made of insulating material
Does not apply to basic enclosures as defined in EN 62208.
10.10 Temperature rise Does not apply to metal enclosures.
10.11 Short-circuit rating The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
10.12 Electromagnetic compatibility Is the panel builder´s responsibility.
10.13 Mechanical function Is the panel builder´s responsibility.
Width Meets the product standard´s requirements.
Height 500 mm
Depth 700 mm
Material 200 mm
Material quality Steel
Surface finishing Other
Colour Powder coating
RAL-number Grey
With mounting plate 7035
Mounting plate depth-adjustable Yes
Number of locks Yes
Floor installation possible 2
Wall fastening possible Yes
Wall build in Yes
Pole fastening Yes
Tackable Yes
Number of doors Yes
Suitable for metrical mounting 1
Suitable for outdoor set-up Yes
Pitched roof No
EMC-version No
With glazed door Yes
With ventilation door No
With backside door No
Impact strength No
Degree of protection (IP) IK09
Degree of protection (NEMA) IP66
Product Standards 12
UL File No. UL 508A; CSA-C22.2 No.14; IEC/EN 60529; CE marking
UL Category Control No. E336299
CSA File No. NITW
CSA Class No.
North America Certification
Conditions of Acceptability Request filed for CSA
Specially designed for North America Series CS may be provided with metal sub-panel. No back mounted components are allowed between sub-panel and the back sheet metal enclosure
Suitable for No
Degree of Protection Industrial Control Panels
Link to sheet catalogue IEC: IP66, indoor and outdoor; UL/CSA Types 1, 12, indoor only.

Mnelko olarak, endüstriyel otomasyon çözümlerinde güvenilir bir iş ortağı olarak, geniş ürün yelpazesi ile işletmenizin tüm ihtiyaçlarını karşılamaya yönelik kaliteli ve yenilikçi ürünler sunmaktayız. Ürün portföyümüz, modern endüstriyel süreçleri desteklemek amacıyla yüksek performans, dayanıklılık ve verimlilik ilkeleri doğrultusunda tasarlanmış çözümlerden oluşur.
Tüm ürünlerimiz, zorlu çalışma koşullarında dahi maksimum güvenilirlik sunar ve işletmenizin operasyonlarını sorunsuz şekilde sürdürmesine yardımcı olur. Endüstriyel otomasyon, enerji yönetimi, kablolama çözümleri ve daha birçok alanda sunduğumuz ürünler, farklı sektörlerdeki ihtiyaçlara esneklikle uyum sağlar.
Ayrıca, ürünlerimiz sadece kaliteli malzemelerle üretilmiş olup, uluslararası standartlara uygunluk göstermektedir. Müşterilerimize sunduğumuz çözümlerle, operasyonel verimliliklerini artırmalarına ve maliyetlerini optimize etmelerine olanak tanıyoruz. Teknolojik gelişmeleri yakından takip eden firmamız, sürekli olarak yenilikçi ürünler sunarak, müşterilerimizin rekabet avantajı elde etmesine destek vermektedir.
Her bir ürün sayfamızda, teknik detaylar, kullanım alanları ve ürün özelliklerine dair kapsamlı bilgilere ulaşabilirsiniz. Endüstriyel süreçlerinizi güçlendirmek için ihtiyacınız olan tüm ürünleri sitemizden keşfedebilir, sorunsuz bir satın alma deneyimi yaşayabilirsiniz.

Benzer Ürünler

DI-120120-CS
Eaton