alt
alt

CI-K2H-145-AD
229308 CI-K2H-145-AD
229308

Yalıtımlı muhafaza, YxGxD=160x100x145mm, +bileşen adaptörü DILE+ZE Yalıtımlı muhafaza, motor koruma rölesi ZE ile DILE kontaktörler için adaptör plakalı, Ürün yelpazesi: CI-K küçük muhafazalar, Temel muhafazalar, Tek ünite, Koruma Derecesi: Ön IP65, IP65, geçmeli kablo girişli, Malzeme: Cam -fiber takviyeli polikarbonat, Renk: Muhafaza tabanı RAL 9005, siyah, Yalnızca operatör RAL 7035, açık gri, Açıklama: Üstte, altta ve arka plakada metrik kablo girişi çıkıntıları, Kontrol kablosu girişi, Lamba göstergesi L‐... monte edilebilir taban çıkıntısı M20/M25, Kablo girişi: sert çıkıntılı versiyon, Boyutlar Genişlik: 100 mm, Yükseklik: 160 mm, Derinlik: 145 mm, Montaj plakalı montaj derinliği: 124 mm, Standartlar: IEC/EN 60529, DIN EN 62208

Yalıtımlı muhafaza, YxGxD=160x100x145mm, +bileşen adaptörü DILE+ZE
Yalıtımlı muhafaza, motor koruma rölesi ZE ile DILE kontaktörler için adaptör plakalı, Ürün yelpazesi: CI-K küçük muhafazalar, Temel muhafazalar, Tek ünite, Koruma Derecesi: Ön IP65, IP65, geçmeli kablo girişli, Malzeme: Cam -fiber takviyeli polikarbonat, Renk: Muhafaza tabanı RAL 9005, siyah, Yalnızca operatör RAL 7035, açık gri, Açıklama: Üstte, altta ve arka plakada metrik kablo girişi çıkıntıları, Kontrol kablosu girişi, Lamba göstergesi L‐... monte edilebilir taban çıkıntısı M20/M25, Kablo girişi: sert çıkıntılı versiyon, Boyutlar Genişlik: 100 mm, Yükseklik: 160 mm, Derinlik: 145 mm, Montaj plakalı montaj derinliği: 124 mm, Standartlar: IEC/EN 60529, DIN EN 62208

Product range CI-K small enclosures
Basic function Basic enclosures
Product function CI-K empty enclosures
Single unit/Complete unit Single unit
Degree of Protection Front IP65
IP65, with push-through cable entry
Degree of Protection Front IP65
IP65, with push-through cable entry
Material Glass-fibre reinforced polycarbonate
Colour Enclosure base RAL 9005, black
Operator only RAL 7035, light gray
Description Metric cable entry knockouts top, bottom and in the back plate
Control cable entry
Lamp indicator L‐… can be mounted in base knock-out M20/M25
Cable entry hard knockout version
Width 100 mm
Height 160 mm
Depth 145 mm
Dimensions 461N004
Legend for the graphic Dimensions from top:
Mounting depth with mounting plate
Mounting depth for mounting rail 7.5 mm height
Mounting depth for mounting rail 15 mm height
Enclosure depth 461N007
Mounting depth with mounting plate 124 mm
Features with adapter plate for contactors DILE with motor-protective relay ZE
Notes
Mq
   

Knockouts

Knockouts

2 X M25 or push-through membrane up to max. ⌀ 16 mm2 x M25 or push-through membrane up to a max. diameter of 16 mm and 1 push-through membrane up to a max. diameter of 8 mm
  
T 
   

Back plate:

 
2 x push-through membrane up to max. ⌀ 11mm  
(not for CI-K2H) 
Standards IEC/EN 60529
DIN EN 62208
Climatic proofing Damp heat, constant, to IEC 60068-2-78
Damp heat, cyclic, to IEC 60068-2-30
Ambient temperature -25 - +70
-25 - +40 (with push-through cable entry) °C
Degree of Protection Front IP65
IP65, with push-through cable entry
Power loss
>Max. radiated heat dissipation with separate mounting, ambient air temperature +20 °C
18.5 W
Material
>Base
Glass-fibre reinforced polycarbonate
Material
>Cover
Glass-fibre reinforced polycarbonate
Surface treatment Resistant to corrosion
Colour
>Base
RAL 9005, black (matt)
Colour
>Housing body
Enclosure cover RAL 7035, light grey (matt)
Electrical
>Track resistance
CTI 175 (base, to IEC 60112)
CTI 175 (cover, to IEC 60112)
Electrical
>Surface resistance to IEC 60093
1 Ω x 1013
Electrical
>Dielectric strength to IEC 60243-1
30 kV/mm
Thermal
>Temperature resistant
-40 °C - 120 °C (enclosure)
-40 °C - +80 °C (gasket)
Mechanical
>Impact resistance
IK06 according to EN 50102
Mechanical
>max. assembly weights
>Mounting plate
0.7 kg
Mechanical
>max. assembly weights
>Mounting rail
0.7 kg
Chemical resistance
>Chemical resistant
Base, Cover
Resistant against: Acids < 10 %, mineral oil, alcohol, gasoline, greases, salt solutions
Partly resistant to: Acids > 10 %, alcohol
Not resistant to: alkalis, benzene
Push-through membrane (CI-K1/CI-K2) and sealing material
Resistant against: Acids < 10 %, alkalis, benzene, salt solutions
Partly resistant to: Acids > 10 %, greases, benzene
Not resistant to: Mineral oil, benzene
Atmospheric
>Saline spray
IEC 60068-2-11
Atmospheric
>UV resistance
Beneath protective shield
Atmospheric
>Water consumption to DIN EN ISO 62
0.29 %
Flammability characteristics
>Glow wire test
>Flammability characteristics
960 °C/1mm thickness (base, cover; glow wire to VDE 0471 Part 2)
650 °C/1mm thick (push-through membrane and seal material) to VDE 0471 Part 2)
Flammability characteristics
>Glow wire test
>to UL 94
VO/1.5 mm thickness
Flammability characteristics
>Glow wire test
>to UL 94
HB
Flammability characteristics
>Halogen free
Yes
Rated operational current for specified heat dissipation [In] 0 A
Heat dissipation per pole, current-dependent [Pvid] 0 W
Equipment heat dissipation, current-dependent [Pvid] 0 W
Static heat dissipation, non-current-dependent [Pvs] 0 W
Heat dissipation capacity [Pdiss] 18.5 W
Operating ambient temperature min. -25 °C
Operating ambient temperature max. +70 °C
Degree of Protection Front IP65
IP65, with push-through cable entry
Max. radiated heat dissipation with separate mounting, ambient air temperature +20 °C 18.5 W
Flammability characteristics 960 °C/1mm thickness (base, cover; glow wire to VDE 0471 Part 2)
650 °C/1mm thick (push-through membrane and seal material) to VDE 0471 Part 2)
Track resistance CTI 175 (base, to IEC 60112)
CTI 175 (cover, to IEC 60112)
Surface treatment Resistant to corrosion
Impact resistance IK06 according to EN 50102
Temperature resistant -40 °C - 120 °C (enclosure)
-40 °C - +80 °C (gasket)
UV resistance Beneath protective shield
10.2 Strength of materials and parts
>10.2.2 Corrosion resistance
Meets the product standard´s requirements.
10.2 Strength of materials and parts
>10.2.3.1 Verification of thermal stability of enclosures
Meets the product standard´s requirements.
10.2 Strength of materials and parts
>10.2.3.2 Verification of resistance of insulating materials to normal heat
Meets the product standard´s requirements.
10.2 Strength of materials and parts
>10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects
Meets the product standard´s requirements.
10.2 Strength of materials and parts
>10.2.4 Resistance to ultra-violet (UV) radiation
Please enquire
10.2 Strength of materials and parts
>10.2.5 Lifting
Not applicable.
10.2 Strength of materials and parts
>10.2.6 Mechanical impact
Meets the product standard´s requirements.
10.2 Strength of materials and parts
>10.2.7 Inscriptions
Meets the product standard´s requirements.
10.3 Degree of protection of ASSEMBLIES Meets the product standard´s requirements.
10.4 Clearances and creepage distances Meets the product standard´s requirements.
10.5 Protection against electric shock Is the panel builder´s responsibility.
10.6 Incorporation of switching devices and components Is the panel builder´s responsibility.
10.7 Internal electrical circuits and connections Is the panel builder´s responsibility.
10.8 Connections for external conductors Is the panel builder´s responsibility.
10.9 Insulation properties
>10.9.2 Power-frequency electric strength
Is the panel builder´s responsibility.
10.9 Insulation properties
>10.9.3 Impulse withstand voltage
Is the panel builder´s responsibility.
10.9 Insulation properties
>10.9.4 Testing of enclosures made of insulating material
Meets the product standard´s requirements.
10.10 Temperature rise The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
10.11 Short-circuit rating Is the panel builder´s responsibility. The specifications for the switchgear must be observed.
10.12 Electromagnetic compatibility Is the panel builder´s responsibility. The specifications for the switchgear must be observed.
10.13 Mechanical function The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
Material housing Plastic
Width 100 mm
Height 160 mm
Depth 145 mm
With transparent cover No
Suitable for emergency stop Yes
Model Surface mounting
Degree of protection (IP) IP65
Degree of protection (NEMA) Other

Mnelko olarak, endüstriyel otomasyon çözümlerinde güvenilir bir iş ortağı olarak, geniş ürün yelpazesi ile işletmenizin tüm ihtiyaçlarını karşılamaya yönelik kaliteli ve yenilikçi ürünler sunmaktayız. Ürün portföyümüz, modern endüstriyel süreçleri desteklemek amacıyla yüksek performans, dayanıklılık ve verimlilik ilkeleri doğrultusunda tasarlanmış çözümlerden oluşur.
Tüm ürünlerimiz, zorlu çalışma koşullarında dahi maksimum güvenilirlik sunar ve işletmenizin operasyonlarını sorunsuz şekilde sürdürmesine yardımcı olur. Endüstriyel otomasyon, enerji yönetimi, kablolama çözümleri ve daha birçok alanda sunduğumuz ürünler, farklı sektörlerdeki ihtiyaçlara esneklikle uyum sağlar.
Ayrıca, ürünlerimiz sadece kaliteli malzemelerle üretilmiş olup, uluslararası standartlara uygunluk göstermektedir. Müşterilerimize sunduğumuz çözümlerle, operasyonel verimliliklerini artırmalarına ve maliyetlerini optimize etmelerine olanak tanıyoruz. Teknolojik gelişmeleri yakından takip eden firmamız, sürekli olarak yenilikçi ürünler sunarak, müşterilerimizin rekabet avantajı elde etmesine destek vermektedir.
Her bir ürün sayfamızda, teknik detaylar, kullanım alanları ve ürün özelliklerine dair kapsamlı bilgilere ulaşabilirsiniz. Endüstriyel süreçlerinizi güçlendirmek için ihtiyacınız olan tüm ürünleri sitemizden keşfedebilir, sorunsuz bir satın alma deneyimi yaşayabilirsiniz.

Benzer Ürünler

CI-K1H-95-TS
Eaton
CI-K2-100-TS
Eaton
CI-K2-145-TS
Eaton
CI-K3-125-TS
Eaton
CI-K3-160-TS
Eaton
CI-K4-125-TS
Eaton
CI-K4-160-TS
Eaton