Kurulum dağıtım panosu, YxGxD=1060x600x262mm, IP54 Hizmet dağıtım panoları IVS, ev elektrik sistemleri için elektrik sistemlerinde ve konut binaları, okul, yönetim merkezleri, ofisler ve benzeri binalar gibi karşılaştırmalı sistemlerde güç dağıtım ve ölçüm amacıyla kullanılır.
Kurulum dağıtım panosu, YxGxD=1060x600x262mm, IP54
Hizmet dağıtım panoları IVS, ev elektrik sistemleri için elektrik sistemlerinde ve konut binaları, okul, yönetim merkezleri, ofisler ve benzeri binalar gibi karşılaştırmalı sistemlerde güç dağıtım ve ölçüm amacıyla kullanılır.
Product range | Service distribution board IVS |
Basic function | Wall-mounting distribution system |
Single unit/Complete unit | Complete housing |
Degree of Protection | IP55 |
Description | Profi Plus basic enclosures Monoblock enclosure with door and double ward key lock The enclosure can be turned through 180° for cable entry from below. |
Material | Sheet steel |
Surface finish | Polyester powder coating Phosphated RAL 7035, light grey |
Colour | light gray (RAL 7035) |
Information about equipment supplied | Including mounting system for the IVS mounting units including insulating surround and mounted insulated support bracket including open cable entry at top, prepared for F3A flanges, closed at bottom |
Width | 600 mm |
Height | 1060 mm |
Depth | 270 mm |
Standards | EN 60439-1/3 IEC 62208 |
Protection class | 1 |
Degree of Protection | IP55 |
Power loss >Max. admissible heat dissipation, ambient air temperature +35 °C |
143 W |
Weight | 38.5 kg |
Material | Sheet steel |
Surface treatment | Painting, phosphated and polyester powder coating |
Surface finish | Polyester powder coating Phosphated RAL 7035, light grey |
Colour | light gray (RAL 7035) |
Material characteristics >Type Door |
Doors with covered hinges Can be removed from 90° |
Material characteristics >door opening angle |
100° (single mounting) |
Material characteristics >Door interlock |
Hinge handle with roller lever lock Cylinder lock Double-ward lock |
Mechanical >Impact resistance |
IK07 |
Mechanical >Cable entry |
Open cable entry, prepared for F3A flanges |
Electrical >Rated operational voltage [Ue ] |
690 V |
Electrical >Rated frequency [f] |
50 Hz |
Electrical >Rated operational current [Ie] |
630 A |
Electrical >Max. admissible heat dissipation, ambient air temperature +35 °C |
143 W |
Electrical >Earthings |
M6 weld stud (base frame) M5 self-tapping screw (enclosure side plate, top/bottom panel) M6 weld stud (door) |
Heat dissipation, at an ambient temperature of 35°C, delta T: 20 degrees in top of the enclosure, calculated as per IEC 60890
>Individual enclosure for wall mounting [PV] |
71 W |
Heat dissipation, at an ambient temperature of 35°C, delta T: 20 degrees in top of the enclosure, calculated as per IEC 60890
>Starting enclosure for wall mounting [PV] |
68 W |
Heat dissipation, at an ambient temperature of 35°C, delta T: 20 degrees in top of the enclosure, calculated as per IEC 60890
>Middle enclosure for wall mounting [PV] |
66 W |
Heat dissipation, at an ambient temperature of 35°C, delta T: 35 degrees in top of the enclosure, calculated as per IEC 60890
>Individual enclosure for wall mounting [PV] |
143 W |
Heat dissipation, at an ambient temperature of 35°C, delta T: 35 degrees in top of the enclosure, calculated as per IEC 60890
>Starting enclosure for wall mounting [PV] |
137 W |
Heat dissipation, at an ambient temperature of 35°C, delta T: 35 degrees in top of the enclosure, calculated as per IEC 60890
>Middle enclosure for wall mounting [PV] |
132 W |
10.2 Strength of materials and parts >10.2.2 Corrosion resistance |
Meets the product standard´s requirements. |
10.2 Strength of materials and parts >10.2.3.1 Verification of thermal stability of enclosures |
Meets the product standard´s requirements. |
10.2 Strength of materials and parts >10.2.3.2 Verification of resistance of insulating materials to normal heat |
Meets the product standard´s requirements. |
10.2 Strength of materials and parts >10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects |
Meets the product standard´s requirements. |
10.2 Strength of materials and parts >10.2.4 Resistance to ultra-violet (UV) radiation |
Not relevant to indoor installations. |
10.2 Strength of materials and parts >10.2.5 Lifting |
Does not apply to enclosures without lifting aids. |
10.2 Strength of materials and parts >10.2.6 Mechanical impact |
IK10 |
10.2 Strength of materials and parts >10.2.7 Inscriptions |
Meets the product standard´s requirements. |
10.3 Degree of protection of ASSEMBLIES | IP55 |
10.4 Clearances and creepage distances | Is the panel builder´s responsibility. |
10.5 Protection against electric shock | < 0.1 Ω; meets the product standard´s requirements. |
10.6 Incorporation of switching devices and components | Is the panel builder´s responsibility. |
10.7 Internal electrical circuits and connections | Is the panel builder´s responsibility. |
10.8 Connections for external conductors | Is the panel builder´s responsibility. |
10.9 Insulation properties >10.9.2 Power-frequency electric strength |
Ui = 440 V AC |
10.9 Insulation properties >10.9.3 Impulse withstand voltage |
4 kV |
10.9 Insulation properties >10.9.4 Testing of enclosures made of insulating material |
Does not apply to metal enclosures. |
10.10 Temperature rise | The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices. |
10.11 Short-circuit rating | Is the panel builder´s responsibility. |
10.12 Electromagnetic compatibility | Is the panel builder´s responsibility. |
10.13 Mechanical function | Meets the product standard´s requirements. |
Mnelko olarak, endüstriyel otomasyon çözümlerinde güvenilir bir iş ortağı olarak, geniş ürün yelpazesi ile işletmenizin tüm ihtiyaçlarını karşılamaya yönelik kaliteli ve yenilikçi ürünler sunmaktayız. Ürün portföyümüz, modern endüstriyel süreçleri desteklemek amacıyla yüksek performans, dayanıklılık ve verimlilik ilkeleri doğrultusunda tasarlanmış çözümlerden oluşur.
Tüm ürünlerimiz, zorlu çalışma koşullarında dahi maksimum güvenilirlik sunar ve işletmenizin operasyonlarını sorunsuz şekilde sürdürmesine yardımcı olur. Endüstriyel otomasyon, enerji yönetimi, kablolama çözümleri ve daha birçok alanda sunduğumuz ürünler, farklı sektörlerdeki ihtiyaçlara esneklikle uyum sağlar.
Ayrıca, ürünlerimiz sadece kaliteli malzemelerle üretilmiş olup, uluslararası standartlara uygunluk göstermektedir. Müşterilerimize sunduğumuz çözümlerle, operasyonel verimliliklerini artırmalarına ve maliyetlerini optimize etmelerine olanak tanıyoruz. Teknolojik gelişmeleri yakından takip eden firmamız, sürekli olarak yenilikçi ürünler sunarak, müşterilerimizin rekabet avantajı elde etmesine destek vermektedir.
Her bir ürün sayfamızda, teknik detaylar, kullanım alanları ve ürün özelliklerine dair kapsamlı bilgilere ulaşabilirsiniz. Endüstriyel süreçlerinizi güçlendirmek için ihtiyacınız olan tüm ürünleri sitemizden keşfedebilir, sorunsuz bir satın alma deneyimi yaşayabilirsiniz.