alt
alt

13DILE
002397 13DILE
2397

Yardımcı kontak modülü, 4 kutuplu, 1 N/A, 3 NC, Önden sabitleme, Vidalı terminaller, DILE(E)M, DILER Karşılıklı kilitli yardımcı kontak modülü, EN 50005'e uygun anahtarlama elemanları, EN 50012'ye uygun anahtarlama elemanları tercih edilmelidir., EN 50011'e uygun E versiyonu kombinasyonları tercih edilmelidir., Fonksiyon: standart uygulamalar için, 4 kutuplu , Bağlantı tekniği: Vidalı terminaller, Nominal çalışma akımı AC-15 220 V 230 V 240 V: Ie= 4 A, Nominal çalışma akımı AC-15 380 V 400 V 415 V: Ie= 2 A, Kontaklar N/O = Normalde açık : 1 N/A, Kontaklar N/C = Normalde kapalı: 3 NC, Montaj tipi: Önden sabitleme, Şunlarla kullanım için: DILEM-10(-G)(…), DILEM-01(-G)(…), DILEM -4(-G)(…), DILER40(-G), DILER31(-G), DILER22, DILEEM-10(-G)(…), DILEEM-01(-G)(…), DILEM12-10( -G)(…), DILEM12-01(-G)(…), Talimatlar: IEC/EN 60947-5-1 ek L'ye göre kilitli karşılıklı kontaklar, yardımcı kontak modüllerinin içinde, ayrıca entegre yardımcı kontaklar için DILE(E)M, IEC/EN 60947-4-1 Ek F'ye göre ayna kontakları olarak kullanılan yardımcı kontaklar (N/C geç açık değil), Kod numarası ve kombinasyon versiyonu Ayırt edici numara: 53E, 44, 35

Yardımcı kontak modülü, 4 kutuplu, 1 N/A, 3 NC, Önden sabitleme, Vidalı terminaller, DILE(E)M, DILER
Karşılıklı kilitli yardımcı kontak modülü, EN 50005'e uygun anahtarlama elemanları, EN 50012'ye uygun anahtarlama elemanları tercih edilmelidir., EN 50011'e uygun E versiyonu kombinasyonları tercih edilmelidir., Fonksiyon: standart uygulamalar için, 4 kutuplu , Bağlantı tekniği: Vidalı terminaller, Nominal çalışma akımı AC-15 220 V 230 V 240 V: Ie= 4 A, Nominal çalışma akımı AC-15 380 V 400 V 415 V: Ie= 2 A, Kontaklar N/O = Normalde açık : 1 N/A, Kontaklar N/C = Normalde kapalı: 3 NC, Montaj tipi: Önden sabitleme, Şunlarla kullanım için: DILEM-10(-G)(…), DILEM-01(-G)(…), DILEM -4(-G)(…), DILER40(-G), DILER31(-G), DILER22, DILEEM-10(-G)(…), DILEEM-01(-G)(…), DILEM12-10( -G)(…), DILEM12-01(-G)(…), Talimatlar: IEC/EN 60947-5-1 ek L'ye göre kilitli karşılıklı kontaklar, yardımcı kontak modüllerinin içinde, ayrıca entegre yardımcı kontaklar için DILE(E)M, IEC/EN 60947-4-1 Ek F'ye göre ayna kontakları olarak kullanılan yardımcı kontaklar (N/C geç açık değil), Kod numarası ve kombinasyon versiyonu Ayırt edici numara: 53E, 44, 35

Accessories Auxiliary contact modules
Description with interlocked opposing contacts
Switching elements according to EN 50005
Switching elements according to EN 50012 are to be preferred.
Version E combinations correspond to EN 50011 and are to be preferred.
Function for standard applications
Number of poles 4 pole
Connection technique Screw terminals
AC-15
>220 V 230 V 240 V [Ie]
AC-15
>380 V 400 V 415 V [Ie]
4 A
N/O = Normally open 2 A
N/C = Normally closed
Mounting type 1 N/O
Contact sequence 3 NC
For use with Front fixing
Instructions 210S007
Distinctive number DILEM-10(-G)(…)
DILEM-01(-G)(…)
DILEM-4(-G)(…)
DILER40(-G)
DILER31(-G)
DILER22
DILEEM-10(-G)(…)
DILEEM-01(-G)(…)
DILEM12-10(-G)(…)
DILEM12-01(-G)(…)
with basic device Interlocked opposing contacts according to IEC/EN 60947-5-1 appendix L, inside the auxiliary contact modules, also for the integrated auxiliary contacts of the DILE(E)M
Auxiliary contacts used as mirror contacts according to IEC/EN 60947-4-1 Appendix F (not N/C late open)
with basic device
with basic device 53E
Standards DILER-40(-G)
Lifespan, mechanical
>AC operated [Operations]
44
Lifespan, mechanical
>DC operated [Operations]
DILER-31(-G)
Component lifespan at Ue = 240 V
>AC-15 [Operations]
35
Component lifespan at Ue = 240 V
>DC
>L/R = 50 ms: 2 contacts in series at Ie = 0.5 A [Operations]
DILER-22
Maximum operating frequency [Operations/h]
Climatic proofing IEC/EN 60947, VDE 0660, UL, CSA
Ambient temperature
>Open
10 x 106
Ambient temperature
>Enclosed
20 x 106
Ambient temperature
>Ambient temperature, storage
0.2 x 106
Mounting position
>Mounting position
0.15 x 106
Mechanical shock resistance (IEC/EN 60068-2-27)
>Half-sinusoidal shock, 10 ms
>Basic unit with auxiliary contact module
>N/O contact
9000
Mechanical shock resistance (IEC/EN 60068-2-27)
>Half-sinusoidal shock, 10 ms
>Basic unit with auxiliary contact module
>N/C contact
Damp heat, constant, to IEC 60068-2-78
Damp heat, cyclic, to IEC 60068-2-30
Degree of Protection -25 - +50 °C
Protection against direct contact when actuated from front (EN 50274) - 25 - 40 °C
Weight - 40 - 80 °C
Terminal capacities
>Screw terminals
>Solid
As required, except vertical with terminals A1/A2 at the bottom
Terminal capacities
>Screw terminals
>Flexible with ferrule
10 g
Terminal capacities
>Screw terminals
>Solid or stranded
8 g
Terminal capacities
>Screw terminals
>Terminal screw
IP20
Terminal capacities
>Screw terminals
>Pozidriv screwdriver
Finger and back-of-hand proof
Terminal capacities
>Screw terminals
>Standard screwdriver
0.04 kg
Terminal capacities
>Screw terminals
>Max. tightening torque
1 x (0.75 - 2.5)
2 x (0.75 - 2.5) mm2
Interlocked opposing contacts within an auxiliary contact module (to IEC 60947-5-1 Annex L) 1 x (0.75 - 1.5)
2 x (0.75 - 1.5) mm2
Rated impulse withstand voltage [Uimp] Single 18 – 14/Double 18 – 14 AWG
Overvoltage category/pollution degree M3.5
Rated insulation voltage [Ui] 2 Size
Rated operational voltage [Ue] 0.8 x 5.5
1 x 6 mm
Safe isolation to EN 61140
>between coil and auxiliary contacts
1.2 Nm
Safe isolation to EN 61140
>between the auxiliary contacts
Rated operational current
>Conventional free air thermal current, 1 pole
>Notes
Yes
Rated operational current
>Conventional free air thermal current, 1 pole
>Conv. thermal current [Ith]
6000 V AC
Rated operational current
>AC-15
>220 V 230 V 240 V [Ie]
III/3
Rated operational current
>AC-15
>380 V 400 V 415 V [Ie]
690 V AC
Rated operational current
>AC-15
>500 V [Ie]
600 V AC
Rated operational current
>DC current
300 V AC
Rated operational current
>DC current
>DC L/R ≦ 15 ms
>Contacts in series:
>1 [24 V]
300 V AC
Rated operational current
>DC current
>DC L/R ≦ 15 ms
>Contacts in series:
>2 [60 V]
At maximum permissible ambient air temperature.
Rated operational current
>DC current
>DC L/R ≦ 15 ms
>Contacts in series:
>3 [110 V]
10 A
Rated operational current
>DC current
>DC L/R ≦ 15 ms
>Contacts in series:
>3 [220 V]
4 A
Rated operational current
>Control circuit reliability [Failure rate]
2 A
Short-circuit rating without welding
>Maximum overcurrent protective device
>220 V 230 V 240 V
1.5 A
Short-circuit rating without welding
>Maximum overcurrent protective device
>380 V 400 V 415 V
Switch-on and switch-off conditions based on DC-13, time constant as specified.
Short-circuit rating without welding
>Short-circuit protection maximum fuse
>500 V
2.5 A
Short-circuit rating without welding
>Short-circuit protection maximum fuse
>500 V
2.5 A
Current heat loss at Ith
>AC operated
1.5 A
Current heat loss at Ith
>DC operated
0.5 A
Current heat loss at Ith
>Current heat loss per auxiliary circuit at Ie (AC-15/230 V)
<10-8, < one failure at 100 million operations
(at Ue = 24 V DC, Umin = 17 V, Imin = 5.4 mA) λ
Auxiliary contacts
>Pilot Duty
>AC operated
4 PKZM0
Auxiliary contacts
>Pilot Duty
>DC operated
4 PKZM0
Auxiliary contacts
>General Use
>AC
6 A gG/gL
Auxiliary contacts
>General Use
>AC
10 A fast
Auxiliary contacts
>General Use
>DC
1.5 W
Auxiliary contacts
>General Use
>DC
1.5 W
Rated operational current for specified heat dissipation [In] 0.24 CO
Heat dissipation per pole, current-dependent [Pvid]
Equipment heat dissipation, current-dependent [Pvid] A600
Static heat dissipation, non-current-dependent [Pvs] P300
Heat dissipation capacity [Pdiss] 600 V
Operating ambient temperature min. 10 A
Operating ambient temperature max. 250 V
10.2 Strength of materials and parts
>10.2.2 Corrosion resistance
0.5 A
10.2 Strength of materials and parts
>10.2.3.1 Verification of thermal stability of enclosures
10.2 Strength of materials and parts
>10.2.3.2 Verification of resistance of insulating materials to normal heat
4 A
10.2 Strength of materials and parts
>10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects
0.24 W
10.2 Strength of materials and parts
>10.2.4 Resistance to ultra-violet (UV) radiation
0 W
10.2 Strength of materials and parts
>10.2.5 Lifting
0 W
10.2 Strength of materials and parts
>10.2.6 Mechanical impact
0 W
10.2 Strength of materials and parts
>10.2.7 Inscriptions
-25 °C
10.3 Degree of protection of ASSEMBLIES +50 °C
10.4 Clearances and creepage distances
10.5 Protection against electric shock Meets the product standard´s requirements.
10.6 Incorporation of switching devices and components Meets the product standard´s requirements.
10.7 Internal electrical circuits and connections Meets the product standard´s requirements.
10.8 Connections for external conductors Meets the product standard´s requirements.
10.9 Insulation properties
>10.9.2 Power-frequency electric strength
Meets the product standard´s requirements.
10.9 Insulation properties
>10.9.3 Impulse withstand voltage
Does not apply, since the entire switchgear needs to be evaluated.
10.9 Insulation properties
>10.9.4 Testing of enclosures made of insulating material
Does not apply, since the entire switchgear needs to be evaluated.
10.10 Temperature rise Meets the product standard´s requirements.
10.11 Short-circuit rating Does not apply, since the entire switchgear needs to be evaluated.
10.12 Electromagnetic compatibility Meets the product standard´s requirements.
10.13 Mechanical function Does not apply, since the entire switchgear needs to be evaluated.
Number of contacts as change-over contact Does not apply, since the entire switchgear needs to be evaluated.
Number of contacts as normally open contact Is the panel builder´s responsibility.
Number of contacts as normally closed contact Is the panel builder´s responsibility.
Number of fault-signal switches Is the panel builder´s responsibility.
Rated operation current Ie at AC-15, 230 V Is the panel builder´s responsibility.
Type of electric connection Is the panel builder´s responsibility.
Model The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
Mounting method Is the panel builder´s responsibility. The specifications for the switchgear must be observed.
Lamp holder Is the panel builder´s responsibility. The specifications for the switchgear must be observed.
Product Standards The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
UL File No.
UL Category Control No.
CSA File No. 0
CSA Class No. 1
North America Certification 3
Specially designed for North America 0
Characteristic curve 4 A
Characteristic curve Screw connection
Characteristic curve Top mounting

Mnelko olarak, endüstriyel otomasyon çözümlerinde güvenilir bir iş ortağı olarak, geniş ürün yelpazesi ile işletmenizin tüm ihtiyaçlarını karşılamaya yönelik kaliteli ve yenilikçi ürünler sunmaktayız. Ürün portföyümüz, modern endüstriyel süreçleri desteklemek amacıyla yüksek performans, dayanıklılık ve verimlilik ilkeleri doğrultusunda tasarlanmış çözümlerden oluşur.
Tüm ürünlerimiz, zorlu çalışma koşullarında dahi maksimum güvenilirlik sunar ve işletmenizin operasyonlarını sorunsuz şekilde sürdürmesine yardımcı olur. Endüstriyel otomasyon, enerji yönetimi, kablolama çözümleri ve daha birçok alanda sunduğumuz ürünler, farklı sektörlerdeki ihtiyaçlara esneklikle uyum sağlar.
Ayrıca, ürünlerimiz sadece kaliteli malzemelerle üretilmiş olup, uluslararası standartlara uygunluk göstermektedir. Müşterilerimize sunduğumuz çözümlerle, operasyonel verimliliklerini artırmalarına ve maliyetlerini optimize etmelerine olanak tanıyoruz. Teknolojik gelişmeleri yakından takip eden firmamız, sürekli olarak yenilikçi ürünler sunarak, müşterilerimizin rekabet avantajı elde etmesine destek vermektedir.
Her bir ürün sayfamızda, teknik detaylar, kullanım alanları ve ürün özelliklerine dair kapsamlı bilgilere ulaşabilirsiniz. Endüstriyel süreçlerinizi güçlendirmek için ihtiyacınız olan tüm ürünleri sitemizden keşfedebilir, sorunsuz bir satın alma deneyimi yaşayabilirsiniz.

Benzer Ürünler

DILMC80(RDC24)
Eaton
DILMC95(230V50HZ,240V60HZ)
Eaton
DILMC95(RDC24)
Eaton
DILMC115(RAC240)
Eaton
DILMC115(RDC24)
Eaton
DILMC150(RAC240)
Eaton
DILMC150(RDC24)
Eaton
SDAINLM70(230V50HZ,240V60HZ)
Eaton
SDAINLM90(230V50HZ,240V60HZ)
Eaton