HTL Incremental Encoder/Counter Interface; Light grey Short description: The 767-5202 Module evaluates incremental encoders and counts binary signals with 24V signal level. Integrated DIOs allow direct adjustment of outputs based on meter states. Two of the four DIO channels can also be used as PWM outputs*. Features: Two incremental encoder/counter interfaces Four digital inputs/outputs 24 VDC/0.1 A (including 2 PWM outputs) Adjustable (incremental encoder, counter, DIO) Fault diagnosis capability (channel-by-channel / module-by-module) Including: 1 x WMB label, orange 1 x label strip 2 x M12 protective cover * Pulse Width Modulated outputs
HTL Incremental Encoder/Counter Interface; Light grey
Short description:
The 767-5202 Module evaluates incremental encoders and counts binary signals with 24V signal level. Integrated DIOs allow direct adjustment of outputs based on meter states. Two of the four DIO channels can also be used as PWM outputs*.
Features:* Pulse Width Modulated outputs
| Number of digital inputs | 4 |
| Number of digital outputs | 4 |
| Number of digital input/outputs (configurable) | 4 |
| Sensör beslemesi | 5 V/24 V, maks. 300 mA |
| Sayaç derinliği | 32Bit |
| Sıfır darbeli latch | 32Bit |
| Sayaç tipi | Artan/Azalan sayaç (artan/azalan pals sayımı), tepe zamanı sayacı (zaman birimi başına pals sayısı), AB sayaç (A+B; A-B), frekans sayacı (giriş frekansı, döngü süresi), pals genişliği (pals genişliği oranı), pals süresi (µs cinsinden süre) |
| Sensor connection | 4 x (2-conductor, 3-conductor) |
| Actuator connection | 4 x (2-conductor, 3 Leiter) |
| Input characteristic | high-side switching |
| Giriş karakteristikleri | IEC 61131-2´ye göre tip 3 |
| Input current per channel for signal (0) max. | 2mA |
| Input current per channel for signal (1) typ. | 2,9mA |
| Input current per channel for signal (1) min. | 2,5mA |
| Input current per channel for signal (1) max. | 3,2mA |
| Giriş gerilimi | 24 VDC (-3 VDC < UIN < +30 VDC) |
| Output characteristic | Push/Pull |
| Output current per channel | 0,1A |
| Çıkış akımı (modül) | 4A |
| OFF durumda kaçak akım | 150µA |
| Çıkış gerilimi | ≤ UA |
| Output protection | Short-circuit/overload protection, thermal shutdown |
| Kısa süreli çıkış akımı, 1 sn (kanal) | 0,2A |
| Sinyal gerilimi (0) | −3 … +5 VDC |
| Sinyal gerilimi (1) | 15 … 30 VDC |
| Çözünürlük | 16 bit (≤ 1 kHz), 12 bit (> 1 kHz) |
| Darbe frekansı | 100 Hz ... 10 kHz |
| Puls boşluk oranı | %0 ... 100 |
| Yanıt süresi | yaklaşık 10 µs (çıkış, %90) |
| Proses veri genişliği | 2 x 4-byte enkoder değeri, 2 x 2-byte kontrol verisi, 1-byte durum DI/kontrol DO |
| Parametrierbare Funktionen | I/O diagnostics (per module): Short circuit/overload of sensor/actuator supply; Undervoltage (ULS + UA) I/O diagnostics (per channel): Encoder: Over-/underflow, wire break, limit value violation (min./max.); DIO: Overtemperature (actuators) Online simulation (channel by channel/module by module): Diagnostics DIOs (channel by channel/module by module): Operating mode, filter, substitute value strategy, etc. Cam (channel-by-channel): Upper/lower value, output, etc. Incremental encoder (channel by channel): Evaluation, filter Counter (channel by channel): Gate, direction, gate time, preset, etc. |
| Koruma | ULS + UA için ters gerilim koruması Sensör/aktüatör beslemesi için kısa devre koruması |
| Operating frequency | 250kHz |
| System supply voltage | ) |
| System and sensor supply voltage | DC 24 V(-25 … +30 %); Logik und Sensorik (ULS) |
| Current consumption: System and sensor | 50mA |
| Field supply voltage | DC 24 V (-25 … +30 %); Aktorik (UA) |
| Current consumption, field supply (module with no external load) | 25mA |
| İzolasyon | 500 V Versorgung/Systembus |
| Indicators | Red LED (F): Error status; Green/red/orange LED (SB): System bus status; Green LED (U<sub>LS</sub>, U<sub>A</sub>): Power supply status; Green/yellow/red LED (Ch1, Ch2): Encoder status; Yellow/red LED (0 … 3): Status DI/DO 1 … DI/DO 8; Non-retentive displays |
| Current carrying capacity of the supply connections | 8A |
| Connection technology: In-/Outputs | 2 x M12 socket, A-coded, 8-pole, shielded; 2 x Buchse M12, A-kodiert, 5-polig, geschirmt |
| Connection technology: field supply | 1 x M12 plug, 4-pole, A-coded; 1 x Buchse M12, 4-polig, A-kodiert |
| Connection technology: system supply | 1 x M12 socket, 4-pole, A-coded; 1 x Plug M12, 4-pole, A-coded |
| Connection technology: System bus | 1 x Buchse M12, 5-polig, B-kodiert, geschirmt; 1 x Stecker M12, 5-polig, B-kodiert, geschirmt |
| Anschlussanforderung zulässige Leitungslänge | 30m |
| Connection requirement (permissible cable type) | Digital inputs: shielded |
| Width | 50 mm / 1.969 inch |
| Height | 35,7 mm / 1.406 inch |
| Depth | 117 mm / 4.606 inch |
| Renk | açık gri |
| Gövde malzemesi | Polyamide (PA), Makrolon (adres anahtarı kapağı), tutuşma UL94-V0´a göre, halojen/silikon içermez |
| Ağırlık | 265 |
| Uygunluk işareti | CE |
| Surrounding air (operating) temperature | -25 … 60 °C |
| Surrounding air (storage) temperature | -40 … 85 °C |
| Koruma sınıfı | IP67 |
| Koruma sınıfı | III |
| Nısbi nem (yoğuşmasız) | 95% |
| Titreşime dayanıklı | 5g acc. to IEC 60068-2-6 |
| Darbe direnci | Short-term: 50g/11 ms/half-sine per IEC 60068-2-27; Long-term: 30g/6 ms/half-sine per IEC 60068-2-29 |
| EMV-Störfestigkeit | acc. to EN 61000-6-2 |
| EMU: |
acc. to EN 61000-6-4 |
| Product Group | 15 (Remote I/O) |
| SAP´den ambalaj tipi | BOX |
| Country of origin | DE |
| GTIN | 4050821346081 |
| Customs Tariff No. | 85389091890 |
As Mnelko, we are a reliable partner in industrial automation solutions, offering high-quality and innovative products with a wide product range to meet all the needs of your business. Our product portfolio consists of solutions designed based on the principles of high performance, durability, and efficiency to support modern industrial processes.
All of our products ensure maximum reliability even in challenging working conditions and help your business operations run smoothly. The products we offer in industrial automation, energy management, cabling solutions, and many other areas adapt flexibly to the needs of different sectors.
Additionally, our products are manufactured using only high-quality materials and comply with international standards. Through the solutions we provide, we enable our customers to increase operational efficiency and optimize costs. Our company closely follows technological advancements and continuously offers innovative products to help our customers gain a competitive advantage.
On each of our product pages, you can find comprehensive information about technical details, areas of use, and product features. You can explore all the products you need to strengthen your industrial processes on our website and enjoy a seamless purchasing experience.
All rights reserved. Mnelko Endüstriyel San. ve Tic.Ltd.Şti. 2024
