Fieldbus Coupler INTERBUS; 2MBd; ECO; Light greyThis bus coupler connects the WAGO-I/O-SYSTEM as a slave to the INTERBUS fieldbus. The bus coupler automatically adjusts to create a local process image that can include analog, digital or custom modules. Analog and special module data are sent in words and/or bytes; Digital data is sent in the form of bits. INTERBUS saves the process image to the relevant Master control (PLC, PC or NC). The local process image is divided into two data regions: received data and data to be sent. Process data can be sent to the PLC, PC or NC via INTERBUS fieldbus for further processing and received from the field via INTERBUS. The data of the analog modules is stored in the automatically generated process image in the order in which the modules are connected to the bus coupler. The bits of the digital modules are sent as bytes and added to the analog data. If the amount of digital information exceeds 8 bits, the bus coupler automatically starts with a new byte.
Fieldbus Coupler INTERBUS; 2MBd; ECO; Light grey
This bus coupler connects the WAGO-I/O-SYSTEM as a slave to the INTERBUS fieldbus.
The bus coupler automatically adjusts to create a local process image that can include analog, digital or custom modules. Analog and special module data are sent in words and/or bytes; Digital data is sent in the form of bits.
INTERBUS saves the process image to the relevant Master control (PLC, PC or NC).
The local process image is divided into two data regions: received data and data to be sent. Process data can be sent to the PLC, PC or NC via INTERBUS fieldbus for further processing and received from the field via INTERBUS.
The data of the analog modules is stored in the automatically generated process image in the order in which the modules are connected to the bus coupler. The bits of the digital modules are sent as bytes and added to the analog data. If the amount of digital information exceeds 8 bits, the bus coupler automatically starts with a new byte.
Communication | INTERBUS |
Number of fieldbus nodes on the master max. | 256 |
Max. Number of I/O points | 4,096 |
Baud rate | 2 MBd |
Fieldbus segment length max. | 150m |
transmission medium | Certified Cu cable |
Number of I/O modules (per node) | 64 |
Input and output process image (Fieldbus) max. | 20 Bytes/20 Bytes |
System supply voltage | DC 24 V(-15 … +20 %); via wiring level |
Current consumption, system supply (5 V) | 350mA |
Total current for system supply | 650mA |
Input current at rated load typ. (24V) | 260mA |
Power supply efficiency at rated load (typ.) (24 V) | 80 % |
Standard | EN 50254 |
Connection technology: communication/fieldbus | INTERBUS: 1 x D-Sub 9 plug / D-Sub 9 socket |
Connection technology: system supply | 4 x CAGE CLAMP® |
Connection technology: Device configuration | 1 x 4-pole male connector |
Connection type (1) | System supply |
Single core lengths | 0.08 … 1.5 mm² / 28 … 16 AWG |
Fine twisted cables | 0.08 … 1.5 mm² / 28 … 16 AWG |
stripping length | 5 … 6 mm / 0.2 … 0.24 inch |
Note (conductor cross-section) | 14 AWG: THHN, THWN |
Width | 49.5 mm / 1.949 inches |
height | 71.9 mm / 2.831 inches |
Height from top edge of DIN rail | 64.7 mm / 2.547 inches |
depth | 96.8 mm / 3.811 inches |
Mounting type | DIN 35 rail |
Colour | Light grey |
body material | Polycarbonate, polyamide 6.6 |
Weight | 115 |
conformity mark | CE |
Surrounding air (operating) temperature | 0 … 55 °C |
Surrounding air (storage) temperature | -25 … 85 °C |
Protection class | IP20 |
Degree of pollution (5) | 2 per IEC 61131-2 |
Working height | without temperature derating: 0 … 2000 m; with temperature rating: 2000 … 5000 m (0.5 K/100 m); max.: 5000m |
Mounting position | any |
Relative humidity (non-condensing) | 95 % |
Vibration resistant | acc. to IEC 60068-2-6 |
impact resistance | 15g per IEC 60068-2-27 |
EMV-Störfestigkeit | acc. to EN 61000-6-2 |
EMU: | acc. to EN 61000-6-4 |
Exposure to pollutants | Per IEC 60068-2-42 and IEC 60068-2-43 |
Permissible H 2 S contaminant concentration at a relative humidity | 10 ppm |
Permissible SO 2 contaminant concentration at a relative humidity | 25ppm |
Product Group | 15 (Remote I/O) |
Packaging type from SAP | BOX |
country of origin | ALSO |
GTIN | 4017332790369 |
Customs Tariff No. | 85176200000 |
As Mnelko, we are a reliable partner in industrial automation solutions, offering high-quality and innovative products with a wide product range to meet all the needs of your business. Our product portfolio consists of solutions designed based on the principles of high performance, durability, and efficiency to support modern industrial processes.
All of our products ensure maximum reliability even in challenging working conditions and help your business operations run smoothly. The products we offer in industrial automation, energy management, cabling solutions, and many other areas adapt flexibly to the needs of different sectors.
Additionally, our products are manufactured using only high-quality materials and comply with international standards. Through the solutions we provide, we enable our customers to increase operational efficiency and optimize costs. Our company closely follows technological advancements and continuously offers innovative products to help our customers gain a competitive advantage.
On each of our product pages, you can find comprehensive information about technical details, areas of use, and product features. You can explore all the products you need to strengthen your industrial processes on our website and enjoy a seamless purchasing experience.