alt
alt

753-649
M-Bus Master

M-Bus Master; - The 753-649 M-Bus Module acts as an M-Bus master, allowing M-Bus slaves to be directly connected to the WAGO-I/O-SYSTEM 750.The Meter-Bus (M-Bus) is a fieldbus system that transmits energy consumption data measured by M-Bus slaves (e.g., heat, water, electricity and gas meters), as well as all sensor and actuator types.The M-Bus master communicates with the M-Bus slaves and forms the interface between the M-Bus and the processing software. On demand, the M-Bus master reads energy consumption data via the M-Bus 2-wire line, transmitting this data to the higher-level control system for further processing or visualization. Alternatively, PLC queries can be implemented via the PLC using IEC 61131-3 function blocks or via a PC application.The M-Bus slaves are powered via the M-bus master. The use of a separate level converter is not required.The M-Bus technology is defined in the technical standard EN 13757, which defines the communication systems for meters and their remote reading.Both signal transmission and operating status, as well as trouble-free internal data bus communication, are indicated via single- and multi-color LEDs.The M-Bus connection modules are short-circuit-protected.

M-Bus Master; -


The 753-649 M-Bus Module acts as an M-Bus master, allowing M-Bus slaves to be directly connected to the WAGO-I/O-SYSTEM 750.

The Meter-Bus (M-Bus) is a fieldbus system that transmits energy consumption data measured by M-Bus slaves (e.g., heat, water, electricity and gas meters), as well as all sensor and actuator types.

The M-Bus master communicates with the M-Bus slaves and forms the interface between the M-Bus and the processing software. On demand, the M-Bus master reads energy consumption data via the M-Bus 2-wire line, transmitting this data to the higher-level control system for further processing or visualization. Alternatively, PLC queries can be implemented via the PLC using IEC 61131-3 function blocks or via a PC application.

The M-Bus slaves are powered via the M-bus master. The use of a separate level converter is not required.

The M-Bus technology is defined in the technical standard EN 13757, which defines the communication systems for meters and their remote reading.

Both signal transmission and operating status, as well as trouble-free internal data bus communication, are indicated via single- and multi-color LEDs.
The M-Bus connection modules are short-circuit-protected.

Device-specific Line length (overall network): up to 1000 m at 9600 baud; up to 2000 m at 2400 baud; up to 6000 m at 300 baud; Master/Slave distance: up to 500 m at 9600 baud; up to 1000 m at 2400 or 300 baud; M-Bus loads (max.); 40 pcs (1.5 mA each); Overcurrent shutdown: active current monitoring; Threshold: approx. 120 mA; Minimum shutdown time: 500 ms
Topoloji Star, tree and line topology
Çıkış gerilimi 23.4 … 25.2 VDC; used to supply M-Bus slaves
Baud rate 300 Baud … 9,6 kBd (2400 baud (default setting))
İletim kanalları 1, bidirectional
Bit genişliği 24 bytes (mailbox 2.0 with 22-byte length)
Devreye alma WAGO-I/O-PRO V2.3, e!COCKPIT
System supply voltage DC 5 V; via data contacts
Current consumption, system supply (5 V) 40mA
Field supply voltage DC 24 V (-2.5 … +5 %); über Leistungskontakte (Einspeisung über Messerkontakt; Weiterleitung über Federkontakt)
Current consumption, field supply (module with no external load) 130mA
İzolasyon 500 V sistem/besleme
Number of incoming power jumper contacts 2
Number of outgoing power jumper contacts 2
Current carrying capacity of the power jumper contacts 10A
Connection technology: In-/Outputs 8 x CAGE CLAMP®
Connection type (1) Inputs/Outputs
Tek damarlı boylar 0,08 … 2,5 mm² / 28 … 14 AWG
İnce bükümlü kablolar 0,08 … 2,5 mm² / 28 … 14 AWG
Sıyırma uzunluğu 8 … 9 mm / 0.31 … 0.35 inch
Connection requirement (permissible cable type) 2-line, shielded or unshielded
Width 12 mm / 0.472 inch
Height 69,8 mm / 2.748 inch
DIN rayın üst kenarından yükseklik 62,6 mm / 2.465 inch
Depth 100 mm / 3.937 inch
Montaj tipi DIN 35 ray
Tak-çıkar konnektör yes
Gövde malzemesi Polycarbonate, polyamide 6.6
Ağırlık 71,9
Uygunluk işareti CE
Surrounding air (operating) temperature 0 … 55 °C
Surrounding air (storage) temperature -40 … 85 °C
Koruma sınıfı IP20
Kirlilik derecesi (5) 2 per IEC 61131-2
Çalışma yüksekliği 0 … 2000 m
Montaj pozisyonu horizontal (standing/lying) or vertical
Nısbi nem (yoğuşmasız) 95%
Titreşime dayanıklı acc. to IEC 60068-2-6
Darbe direnci 15g per IEC 60068-2-27
Kirletici maddelere maruziyet Per IEC 60068-2-42 and IEC 60068-2-43
Permissible H2S contaminant concentration at a relative humidity 75 % 10ppm
Permissible SO2 contaminant concentration at a relative humidity 75 % 25ppm
SAP´den ambalaj tipi BOX
Country of origin DE
GTIN 4055143622127
Customs Tariff No. 85389099990

As Mnelko, we are a reliable partner in industrial automation solutions, offering high-quality and innovative products with a wide product range to meet all the needs of your business. Our product portfolio consists of solutions designed based on the principles of high performance, durability, and efficiency to support modern industrial processes.
All of our products ensure maximum reliability even in challenging working conditions and help your business operations run smoothly. The products we offer in industrial automation, energy management, cabling solutions, and many other areas adapt flexibly to the needs of different sectors.
Additionally, our products are manufactured using only high-quality materials and comply with international standards. Through the solutions we provide, we enable our customers to increase operational efficiency and optimize costs. Our company closely follows technological advancements and continuously offers innovative products to help our customers gain a competitive advantage.
On each of our product pages, you can find comprehensive information about technical details, areas of use, and product features. You can explore all the products you need to strengthen your industrial processes on our website and enjoy a seamless purchasing experience.