DALI Multi-Master; Light greyThe 753-647 DALI Multi-Master Module complies with the DALI standard according to IEC 62386. This manufacturer-independent protocol enables interoperability of DALI devices in lighting applications. The 12 mm wide module is a DALI interface used with WAGO 750 Series Controllers and Modules (e.g. BACnet, KNX, EnOcean, LON, MODBUS). Each DALI Multi-Master Module supports 64 addresses for electronic control devices (ECGs) and 64 addresses for DALI sensors. Each DALI ECG can be assigned to 16 groups and 16 scenes. The 753-647 Module also provides an additional 16 virtual groups on the DALI bus. Using the WAGO-I/O-SYSTEM, DALI controllers can be seamlessly integrated with all supported BA and fieldbus protocols. Several DALI masters can be connected to a single fieldbus node. The maximum number of modules that can be connected to a controller depends on the memory required by the application. Fieldbus nodes are programmed with WAGO I/O PRO software. WAGO makes it easy to create complex lighting applications by providing a comprehensive library of IEC-61131-3 function blocks. Alternatively, "Easy Mode" allows lighting functions to be easily controlled without any complex PLC programming. The 753-647 Module is future proof and can be upgraded to the latest DALI version. The comprehensive and easy-to-use commissioning and maintenance tool is available as a standalone application or as the integrated WAGO-I/O-CHECK software component. The following two power supply options are available for the 753-647 Series: 1. 753-620 DALI Multi-Master DC/DC Converter is used to power a single module. 2. 787-1007 Power Supply is used to power several modules.
DALI Multi-Master; Light grey
The 753-647 DALI Multi-Master Module complies with the DALI standard according to IEC 62386. This manufacturer-independent protocol enables interoperability of DALI devices in lighting applications.
The 12 mm wide module is a DALI interface used with WAGO 750 Series Controllers and Modules (e.g. BACnet, KNX, EnOcean, LON, MODBUS).
Each DALI Multi-Master Module supports 64 addresses for electronic control devices (ECGs) and 64 addresses for DALI sensors. Each DALI ECG can be assigned to 16 groups and 16 scenes. The 753-647 Module also provides an additional 16 virtual groups on the DALI bus.
Using the WAGO-I/O-SYSTEM, DALI controllers can be seamlessly integrated with all supported BA and fieldbus protocols. Several DALI masters can be connected to a single fieldbus node. The maximum number of modules that can be connected to a controller depends on the memory required by the application. Fieldbus nodes are programmed with WAGO I/O PRO software. WAGO makes it easy to create complex lighting applications by providing a comprehensive library of IEC-61131-3 function blocks.
Alternatively, "Easy Mode" allows lighting functions to be easily controlled without any complex PLC programming. The 753-647 Module is future proof and can be upgraded to the latest DALI version. The comprehensive and easy-to-use commissioning and maintenance tool is available as a standalone application or as the integrated WAGO-I/O-CHECK software component.
The following two power supply options are available for the 753-647 Series:
1. 753-620 DALI Multi-Master DC/DC Converter is used to power a single module.
2. 787-1007 Power Supply is used to power several modules.
Gerätespezifikation | DALI specification: DIN IEC 62386 only in conjunction with 753-620 or 787-1007 Power Supplies |
Device-specific | Current consumption from DALI bus with alternative supply via DALI bus: 10 mA |
Topoloji | Number of slaves (DALI): addressable: 64 control devices + 64 control gears |
İletim kanalı | 1 |
Bit genişliği | 24-byte veri |
Garanti edilen besleme akımı | 200mA |
Maksimum besleme akımı | 250mA |
Güç kaynağı | DALI: 18 V (extern) |
Devreye alma | WAGO-I/O-CHECK üzerinden |
System supply voltage | DC 5 V; via data contacts |
Current consumption, system supply (5 V) | 85mA |
İzolasyon | 1500 V DC DALI veriyolu/Dahili veri yolu |
Connection technology: In-/Outputs | 8 x CAGE CLAMP® |
Connection type (1) | Inputs/Outputs |
Tek damarlı boylar | 0,08 … 2,5 mm² / 28 … 14 AWG |
İnce bükümlü kablolar | 0,08 … 2,5 mm² / 28 … 14 AWG |
Sıyırma uzunluğu | 9 … 10 mm / 0.35 … 0.39 inch |
Width | 12 mm / 0.472 inch |
Height | 69 mm / 2.717 inch |
DIN rayın üst kenarından yükseklik | 61,8 mm / 2.433 inch |
Depth | 100 mm / 3.937 inch |
Montaj tipi | DIN 35 ray |
Tak-çıkar konnektör | yes |
Renk | açık gri |
Gövde malzemesi | Polycarbonate, polyamide 6.6 |
Ağırlık | 61,4 |
Uygunluk işareti | CE |
Surrounding air (operating) temperature | 0 … 55 °C |
Surrounding air (storage) temperature | -40 … 85 °C |
Koruma sınıfı | IP20 |
Kirlilik derecesi (5) | 2 per IEC 61131-2 |
Çalışma yüksekliği | 0 … 2000 m |
Montaj pozisyonu | horizontal (standing/lying) or vertical |
Nısbi nem (yoğuşmasız) | 95% |
Titreşime dayanıklı | 4g per IEC 60068-2-6 |
Darbe direnci | 15g per IEC 60068-2-27 |
EMV-Störfestigkeit | acc. to EN 61000-6-2*, *Only in conjunction with 753-620 / 787-1007 DC/DC Converter |
EMU: |
acc. to EN 61000-6-3*, *Only in conjunction with 753-620 / 787-1007 DC/DC Converter |
Kirletici maddelere maruziyet | Per IEC 60068-2-42 and IEC 60068-2-43 |
Permissible H2S contaminant concentration at a relative humidity |
10ppm |
Permissible SO2 contaminant concentration at a relative humidity |
25ppm |
Product Group | 15 (Remote I/O) |
SAP´den ambalaj tipi | BOX |
Country of origin | DE |
GTIN | 4050821475712 |
Customs Tariff No. | 85389099990 |
As Mnelko, we are a reliable partner in industrial automation solutions, offering high-quality and innovative products with a wide product range to meet all the needs of your business. Our product portfolio consists of solutions designed based on the principles of high performance, durability, and efficiency to support modern industrial processes.
All of our products ensure maximum reliability even in challenging working conditions and help your business operations run smoothly. The products we offer in industrial automation, energy management, cabling solutions, and many other areas adapt flexibly to the needs of different sectors.
Additionally, our products are manufactured using only high-quality materials and comply with international standards. Through the solutions we provide, we enable our customers to increase operational efficiency and optimize costs. Our company closely follows technological advancements and continuously offers innovative products to help our customers gain a competitive advantage.
On each of our product pages, you can find comprehensive information about technical details, areas of use, and product features. You can explore all the products you need to strengthen your industrial processes on our website and enjoy a seamless purchasing experience.