alt
alt

753-646
KNX/EIB/TP1 Interface

KNX/EIB/TP1 Interface; Light greyThe KNX/EIB/TP1 I/O module 753‐646 is used to connect to the KNX/EIB/TP1 network. The module supports two different functions: 1. Device mode: With this module, all programmable controllers (*1) related to building automation can be connected to the KNX/TP1 network. In a KNX network the module appears as a standard KNX device and is connected using the ETS 3 Professional commissioning tool. The module supports a maximum of 253 communication objects, 254 group addresses and 254 relationships with any DPT. The application is programmed using WAGO‐I/O‐PRO CAA. In order to allocate the data from the application program to group addresses, the ETS3 plug-in in the WAGO product database is required. *1: See www.wago.com: Documentation WAGO-I/O-SYSTEM 753 Special Modules KNX/EIB/TP1 Module ‐ Device Mode 2. Router mode: With the first 753-646 KNX/EIB/TP1 module connected, this module can be used as a KNXnet/IP router when used with the 750-849 KNX IP controller. The module automatically switches to router mode. No application program is required to operate in router mode. Additional modules connected to the KNX IP controller are addressed by the application in device mode. The Series 753 connector with internally connected contacts (3/7 and 4/8) is part of the delivery. To use the KNX/EIB/TP1 I/O module, both an external KNX voltage supply and ETS 3.0 Professional are required.

KNX/EIB/TP1 Interface; Light grey


The KNX/EIB/TP1 I/O module 753‐646 is used to connect to the KNX/EIB/TP1 network. The module supports two different functions:

1. Device mode: With this module, all programmable controllers (*1) related to building automation can be connected to the KNX/TP1 network. In a KNX network the module appears as a standard KNX device and is connected using the ETS 3 Professional commissioning tool. The module supports a maximum of 253 communication objects, 254 group addresses and 254 relationships with any DPT. The application is programmed using WAGO‐I/O‐PRO CAA. In order to allocate the data from the application program to group addresses, the ETS3 plug-in in the WAGO product database is required.

*1: See www.wago.com: Documentation WAGO-I/O-SYSTEM 753 Special Modules KNX/EIB/TP1 Module ‐ Device Mode

2. Router mode: With the first 753-646 KNX/EIB/TP1 module connected, this module can be used as a KNXnet/IP router when used with the 750-849 KNX IP controller. The module automatically switches to router mode. No application program is required to operate in router mode. Additional modules connected to the KNX IP controller are addressed by the application in device mode.

The Series 753 connector with internally connected contacts (3/7 and 4/8) is part of the delivery.

To use the KNX/EIB/TP1 I/O module, both an external KNX voltage supply and ETS 3.0 Professional are required.

Gerätespezifikation KNX/TP1 bus specification: 1.0
Device-specific Number of group addresses: 254; Number of communication objects: 253; Number of associations: 254
Çekilen akım (tip.) 5 mA (KNX)
Baud rate 9,6 kBd (KNX)
Bit genişliği 24 byte
Güç kaynağı KNX: über KNX-Netzteil
Devreye alma WAGO-I/O-PRO V2.3
Advanced diagnostics FbKNX_Master_646 fonksiyon bloğu (aygıt modu) üzerinden
System supply voltage DC 5 V; via data contacts
Current consumption, system supply (5 V) 25mA
İzolasyon 2,5 kV rms
Connection technology: In-/Outputs 8 x CAGE CLAMP®
Connection type (1) Inputs/Outputs
Tek damarlı boylar 0,08 … 2,5 mm² / 28 … 14 AWG
İnce bükümlü kablolar 0,08 … 2,5 mm² / 28 … 14 AWG
Sıyırma uzunluğu 9 … 10 mm / 0.35 … 0.39 inch
Anschlusspunkt Sonstiges Bezeichnung Programmiertaste; Brücke 2/6
Width 12 mm / 0.472 inch
Height 69 mm / 2.717 inch
DIN rayın üst kenarından yükseklik 61,8 mm / 2.433 inch
Depth 100 mm / 3.937 inch
Montaj tipi DIN 35 ray
Tak-çıkar konnektör yes
Renk açık gri
Gövde malzemesi Polycarbonate, polyamide 6.6
Ağırlık 55,9
Uygunluk işareti CE
Surrounding air (operating) temperature 0 … 55 °C
Surrounding air (storage) temperature -40 … 85 °C
Koruma sınıfı IP20
Kirlilik derecesi (5) 2 per IEC 61131-2
Çalışma yüksekliği 0 … 2000 m
Montaj pozisyonu horizontal (standing/lying) or vertical
Nısbi nem (yoğuşmasız) 95%
Titreşime dayanıklı 4g per IEC 60068-2-6
Darbe direnci 15g per IEC 60068-2-27
EMV-Störfestigkeit acc. to EN 61000-6-2, marine applications
EMU: 1 - enterferans emisyonu acc. to EN 61000-6-3, marine applications
Kirletici maddelere maruziyet Per IEC 60068-2-42 and IEC 60068-2-43
Permissible H2S contaminant concentration at a relative humidity 75 % 10ppm
Permissible SO2 contaminant concentration at a relative humidity 75 % 25ppm
Product Group 15 (Remote I/O)
SAP´den ambalaj tipi BOX
Country of origin DE
GTIN 4045454778033
Customs Tariff No. 85389099990

As Mnelko, we are a reliable partner in industrial automation solutions, offering high-quality and innovative products with a wide product range to meet all the needs of your business. Our product portfolio consists of solutions designed based on the principles of high performance, durability, and efficiency to support modern industrial processes.
All of our products ensure maximum reliability even in challenging working conditions and help your business operations run smoothly. The products we offer in industrial automation, energy management, cabling solutions, and many other areas adapt flexibly to the needs of different sectors.
Additionally, our products are manufactured using only high-quality materials and comply with international standards. Through the solutions we provide, we enable our customers to increase operational efficiency and optimize costs. Our company closely follows technological advancements and continuously offers innovative products to help our customers gain a competitive advantage.
On each of our product pages, you can find comprehensive information about technical details, areas of use, and product features. You can explore all the products you need to strengthen your industrial processes on our website and enjoy a seamless purchasing experience.