Digital pulse interface; Light greyThe digital pulse interface is designed to connect magnetostrictive distance measuring sensors with a start/stop interface. After the read pulse is received, these sensors send a time-delayed response pulse. Time delay is proportional to sensor distance. Each sensor can have up to four position transmitters (natural magnets). Location data can be accessed serially by the control. The position data is recorded as a 24-bit value in the process image of the fieldbus coupler. Parameter setting of ultrasonic speed and transmission points is done with the control byte. Parameters can be changed during operation. Transmission of pulses is done with RS-422 differential drivers that provide smooth data transmission. Distance sensors with: Start/Stop interface with RS-422 differential signal, 24 V sensor supply, manufacturer: e.g. Balluff Note:753 Series plug-in connectors and coding fingers are not included.
Digital pulse interface; Light grey
The digital pulse interface is designed to connect magnetostrictive distance measuring sensors with a start/stop interface. After the read pulse is received, these sensors send a time-delayed response pulse. Time delay is proportional to sensor distance.
Each sensor can have up to four position transmitters (natural magnets). Location data can be accessed serially by the control. The position data is recorded as a 24-bit value in the process image of the fieldbus coupler.
Parameter setting of ultrasonic speed and transmission points is done with the control byte. Parameters can be changed during operation.
Transmission of pulses is done with RS-422 differential drivers that provide smooth data transmission.
Distance sensors with: Start/Stop interface with RS-422 differential signal, 24 V sensor supply, manufacturer: e.g. Balluff
753 Series plug-in connectors and coding fingers are not included.
| Giriş sayısı | 1 |
| Sinyal tipi | differential signal (RS 422) |
| Sensör bağlantısı | Başlat/Durdur; Başla; Vv; sensör gövdesi aracılığıyla blendaj toprak bağlantısı |
| Çözünürlük | 1 µm |
| Güncelleme süresi | 2ms |
| Bit genişliği | 1 x 24 bit veri 1 x 8 bit kontrol/durum |
| Mesafe sensörü uzunluğu | 4m |
| Histeresis | mesafe sensörüne bağlı |
| System supply voltage | DC 5 V; via data contacts |
| Current consumption, system supply (5 V) | 45mA |
| Field supply voltage | DC 24 V (-15 … +20 %); über Leistungskontakte (Einspeisung über Messerkontakt; Weiterleitung über Federkontakt) |
| İzolasyon | 500 V sistem/besleme |
| Number of incoming power jumper contacts | 2 |
| Number of outgoing power jumper contacts | 2 |
| Connection technology: In-/Outputs | 8 x CAGE CLAMP® |
| Connection type (1) | Inputs/Outputs |
| Tek damarlı boylar | 0,08 … 2,5 mm² / 28 … 14 AWG |
| İnce bükümlü kablolar | 0,08 … 2,5 mm² / 28 … 14 AWG |
| Sıyırma uzunluğu | 9 … 10 mm / 0.35 … 0.39 inch |
| Anschlussanforderung zulässige Leitungslänge | 500m |
| Connection requirement (permissible cable type) | RS-422 |
| Width | 12 mm / 0.472 inch |
| Height | 69,8 mm / 2.748 inch |
| DIN rayın üst kenarından yükseklik | 62,6 mm / 2.465 inch |
| Depth | 100 mm / 3.937 inch |
| Montaj tipi | DIN 35 ray |
| Tak-çıkar konnektör | yes |
| Renk | açık gri |
| Gövde malzemesi | Polycarbonate, polyamide 6.6 |
| Ağırlık | 42 |
| Uygunluk işareti | CE |
| Surrounding air (operating) temperature | 0 … 55 °C |
| Surrounding air (storage) temperature | -40 … 85 °C |
| Koruma sınıfı | IP20 |
| Kirlilik derecesi (5) | 2 per IEC 61131-2 |
| Çalışma yüksekliği | 0 … 2000 m |
| Montaj pozisyonu | horizontal (standing/lying) or vertical |
| Nısbi nem (yoğuşmasız) | 95% |
| Titreşime dayanıklı | acc. to IEC 60068-2-6 |
| Darbe direnci | 15g per IEC 60068-2-27 |
| EMV-Störfestigkeit | acc. to EN 61000-6-2 |
| EMU: |
acc. to EN 61000-6-4 |
| Kirletici maddelere maruziyet | Per IEC 60068-2-42 and IEC 60068-2-43 |
| Permissible H2S contaminant concentration at a relative humidity |
10ppm |
| Permissible SO2 contaminant concentration at a relative humidity |
25ppm |
| Product Group | 15 (Remote I/O) |
| SAP´den ambalaj tipi | BOX |
| Country of origin | DE |
| GTIN | 4045454540975 |
| Customs Tariff No. | 85389099990 |
As Mnelko, we are a reliable partner in industrial automation solutions, offering high-quality and innovative products with a wide product range to meet all the needs of your business. Our product portfolio consists of solutions designed based on the principles of high performance, durability, and efficiency to support modern industrial processes.
All of our products ensure maximum reliability even in challenging working conditions and help your business operations run smoothly. The products we offer in industrial automation, energy management, cabling solutions, and many other areas adapt flexibly to the needs of different sectors.
Additionally, our products are manufactured using only high-quality materials and comply with international standards. Through the solutions we provide, we enable our customers to increase operational efficiency and optimize costs. Our company closely follows technological advancements and continuously offers innovative products to help our customers gain a competitive advantage.
On each of our product pages, you can find comprehensive information about technical details, areas of use, and product features. You can explore all the products you need to strengthen your industrial processes on our website and enjoy a seamless purchasing experience.
All rights reserved. Mnelko Endüstriyel San. ve Tic.Ltd.Şti. 2024
