alt
alt

750-669/000-003
Fault safe 4/4 channel digital input/relay output

Arıza emniyetli 4/4 kanallı dijital giriş/röle çıkışı; 48 VAC/ 60 VDC; 6 A; PROFIsafe V2.0 iPar; sarı The relay module has 4 safe inputs and 4 safe relay outputs and is particularly suitable for applications that require, e.g., individually electrically isolated outputs, that must switch high loads or that are controlled via different types of voltage (e.g., DC or AC). The electrically isolated outputs can be freely combined with each other, so that Cat. 2 or Cat. 4 architectures up to SIL3 or PLe are possible.Depending on the requirements, four safe inputs can be used, e.g., as monitoring inputs for the contactor feedback contacts or freely for switches or door contacts.On the input side, the module monitors: short circuits, cross circuits and 24 V power supply from separate sources. Both the monitoring and additional safety relevant parameters (e.g., operating modes, test pulse length, discrepancy or filter times) can be configured via WAGO-I/O-CHECK. The configuration tool can be conveniently integrated into engineering systems supporting both CC2 and CC3 tool calling interfaces (TCI). When exchanging modules, parameters are automatically downloaded into the control unit via PROFIsafe-compatible iPar server – depending on settings.The PROFIsafe address can be set using the DIP switch on the side of the module, or via WAGO-I/O-CHECK.The module supports both PROFIsafe V1 (PROFIBUS) and V2 (PROFIBUS, PROFINET) protocols.The individual input modules can be arranged in any combination when configuring the fieldbus node.To protect the module against impulse voltages (over-voltage protectionacc. to IEC 61000-4-5), the 750-626 Filter Module or an external surge filter must be used for the 24 V supply voltage.Reference the product manual for further information.

Arıza emniyetli 4/4 kanallı dijital giriş/röle çıkışı; 48 VAC/ 60 VDC; 6 A; PROFIsafe V2.0 iPar; sarı


The relay module has 4 safe inputs and 4 safe relay outputs and is particularly suitable for applications that require, e.g., individually electrically isolated outputs, that must switch high loads or that are controlled via different types of voltage (e.g., DC or AC). The electrically isolated outputs can be freely combined with each other, so that Cat. 2 or Cat. 4 architectures up to SIL3 or PLe are possible.

Depending on the requirements, four safe inputs can be used, e.g., as monitoring inputs for the contactor feedback contacts or freely for switches or door contacts.
On the input side, the module monitors: short circuits, cross circuits and 24 V power supply from separate sources. Both the monitoring and additional safety relevant parameters (e.g., operating modes, test pulse length, discrepancy or filter times) can be configured via WAGO-I/O-CHECK. The configuration tool can be conveniently integrated into engineering systems supporting both CC2 and CC3 tool calling interfaces (TCI). When exchanging modules, parameters are automatically downloaded into the control unit via PROFIsafe-compatible iPar server – depending on settings.

The PROFIsafe address can be set using the DIP switch on the side of the module, or via WAGO-I/O-CHECK.

The module supports both PROFIsafe V1 (PROFIBUS) and V2 (PROFIBUS, PROFINET) protocols.

The individual input modules can be arranged in any combination when configuring the fieldbus node.

To protect the module against impulse voltages (over-voltage protectionacc. to IEC 61000-4-5), the 750-626 Filter Module or an external surge filter must be used for the 24 V supply voltage.

Reference the product manual for further information.

Number of digital inputs 4
Number of digital outputs 4
Total number of channels (module) 8
Achievable safety classes SIL 3; Cat. 4, PL e
Sinyal tipi Voltage
Type of signal voltage AC 48 V
Sensor connection 4 x (sicherer Eingang mit Testpuls)
Actuator connection 4 x (fail-safe output with test pulse)
Input characteristic clock sensitive
Giriş karakteristikleri Type 1
Input current per channel for signal (1) typ. 2,2mA
Output switching design Relay Output
Output current per channel 6A
Çıkış akımı (modül) 24A
Signal frequency max. 50Hz
Anahtarlama gecikmesi 50ms
Switching current, information note Schaltstrombereich kompatibel zu den WAGO-PROFIsafe-Busklemmen 75x-66x/000-003
Yük anahtarlama gerilim aralığı 5 V … 60 V DC (SELV/PELV); 5 V … 48 V AC
Anahtarlama akımı 3mA
System supply voltage DC 5 V; via data contacts
Current consumption, system supply (5 V) 145mA
System and sensor supply voltage DC 24 V(-25 … +30 %)
Field supply voltage DC 24 V; über Verdrahtungsebene (Push-in CAGE CLAMP®-Anschluss)
Current consumption, field supply (module with no external load) 50mA
İzolasyon 500 V sistem/besleme
Yalıtım gerilimi Relaisausgänge: AC 48 V, DC 60 V
Indicators LED grün/rot: Status/Fehler I1 … I4, RO1 … RO4; LED rot (Err): Sammelfehler; LED grün/rot (K, PS): Diagnose; LED rot (iPar): Parametrierung
Connection technology: In-/Outputs 16 x Push-in CAGE CLAMP®
Connection technology: field supply 2 x Push-in CAGE CLAMP®
Connection type (1) Inputs/Outputs
Tek damarlı boylar 0,5 … 1,5 mm² / 20 … 14 AWG
İnce bükümlü kablolar 0,5 … 1,5 mm² / 20 … 14 AWG
Sıyırma uzunluğu 8 … 9 mm / 0.31 … 0.35 inch
Connection type (2) Feldversorgung
Width 48 mm / 1.89 inch
Height 69,8 mm / 2.748 inch
DIN rayın üst kenarından yükseklik 62,6 mm / 2.465 inch
Depth 100 mm / 3.937 inch
Montaj tipi DIN 35 ray
Renk sarı
Gövde malzemesi Polycarbonate, polyamide 6.6
Ağırlık 220,3
Surrounding air (operating) temperature 0 … 55 °C
Surrounding air (storage) temperature -40 … 85 °C
Koruma sınıfı IP20
Kirlilik derecesi (5) 2 per IEC 61131-2
Çalışma yüksekliği 0 … 2000 m
Montaj pozisyonu horizontal (standing/lying) or vertical
Nısbi nem (yoğuşmasız) 95%
Titreşime dayanıklı acc. to IEC 60068-2-6
Darbe direnci 15g per IEC 60068-2-27
EMV-Störfestigkeit acc. to EN 61000-6-2, EN 61000-6-7, EN 61326-3
EMU: 1 - enterferans emisyonu acc. to EN 61000-6-4
Kirletici maddelere maruziyet Per IEC 60068-2-42 and IEC 60068-2-43
Permissible H2S contaminant concentration at a relative humidity 75 % 10ppm
Permissible SO2 contaminant concentration at a relative humidity 75 % 25ppm
SAP´den ambalaj tipi BOX
Country of origin DE
GTIN 4055143535588
Customs Tariff No. 85389099990

As Mnelko, we are a reliable partner in industrial automation solutions, offering high-quality and innovative products with a wide product range to meet all the needs of your business. Our product portfolio consists of solutions designed based on the principles of high performance, durability, and efficiency to support modern industrial processes.
All of our products ensure maximum reliability even in challenging working conditions and help your business operations run smoothly. The products we offer in industrial automation, energy management, cabling solutions, and many other areas adapt flexibly to the needs of different sectors.
Additionally, our products are manufactured using only high-quality materials and comply with international standards. Through the solutions we provide, we enable our customers to increase operational efficiency and optimize costs. Our company closely follows technological advancements and continuously offers innovative products to help our customers gain a competitive advantage.
On each of our product pages, you can find comprehensive information about technical details, areas of use, and product features. You can explore all the products you need to strengthen your industrial processes on our website and enjoy a seamless purchasing experience.