alt
alt

750-663/000-003
Self-powered 4-channel digital input

Intrinsically safe 4-channel digital input; 24VDC; PROFIsafe V2.0 iPar; very colorfulIntrinsically safe 750-663/000-003 PROFIsafe Input Module for functional safety SIL 3, Cat. 4 provides risk reduction up to PL e and connects potential-free, contact-based emergency stop buttons, safety door buttons, mode selectors and safety sensors in hazardous environments 0, 1 and 2. The fail-safe entry module must be placed in Zone 2. The input module has 4 clock-sensitive inputs (I1 ... I4) fed by 2 different clocked, short-circuit-protected outputs (T1 ... T2). Inputs are constantly monitored for reverse circuits and voltage supply from separate sources. Additional safety-related functions (e.g. operating modes, switch-off test pulses, conflict or filter times) can be set with WAGO-I/O-CHECK. This configuration tool supports CC2 and CC3 ride-hailing interfaces (TCI). When changing modules, parameters are automatically downloaded by the controller from the PROFIsafe-compatible iPar server, depending on the settings. The module supports PROFIsafe V1 and V2 (PROFIBUS, PROFINET) protocols. Individual I/O modules can be arranged in any combination on the Ex segment of the fieldbus node. Note 1: The PROFIsafe input module must only be operated using an Ex i 24VDC power supply (e.g. 750-606, 750-625/000-001)! General information on explosion protection (e.g. mounting regulations) is available in the WAGO-I/O-SYSTEM 750 manuals! Note 2: To protect the module against voltage surges (surge protection in accordance with IEC 61000-4-5) a filter module (750-626 or 750-624) or external surge filter must be used before the Ex i 24VDC power supply. For more information, see the product user manual.

Intrinsically safe 4-channel digital input; 24VDC; PROFIsafe V2.0 iPar; very colorful


Intrinsically safe 750-663/000-003 PROFIsafe Input Module for functional safety SIL 3, Cat. 4 provides risk reduction up to PL e and connects potential-free, contact-based emergency stop buttons, safety door buttons, mode selectors and safety sensors in hazardous environments 0, 1 and 2. The fail-safe entry module must be placed in Zone 2.

The input module has 4 clock-sensitive inputs (I1 ... I4) fed by 2 different clocked, short-circuit-protected outputs (T1 ... T2). Inputs are constantly monitored for reverse circuits and voltage supply from separate sources.

Additional safety-related functions (e.g. operating modes, switch-off test pulses, conflict or filter times) can be set with WAGO-I/O-CHECK. This configuration tool supports CC2 and CC3 ride-hailing interfaces (TCI). When changing modules, parameters are automatically downloaded by the controller from the PROFIsafe-compatible iPar server, depending on the settings. The module supports PROFIsafe V1 and V2 (PROFIBUS, PROFINET) protocols.

Individual I/O modules can be arranged in any combination on the Ex segment of the fieldbus node.

Note 1:

The PROFIsafe input module must only be operated using an Ex i 24VDC power supply (e.g. 750-606, 750-625/000-001)! General information on explosion protection (e.g. mounting regulations) is available in the WAGO-I/O-SYSTEM 750 manuals!

Note 2:

To protect the module against voltage surges (surge protection in accordance with IEC 61000-4-5) a filter module (750-626 or 750-624) or external surge filter must be used before the Ex i 24VDC power supply.

For more information, see the product user manual.

Number of digital inputs 4
Total number of channels (module) 4
Achievable safety classes IEC 61508:2010´a göre SIL 3; IEC 61511:2005´e göre SIL 3; IEC 62061:2005´e göre SIL 3; EN ISO 13849:2008´e göre Cat. 4, PL e
Sinyal tipi Voltage
Type of signal voltage DC 24 V
Sensor connection 4 x (sicherer Eingang mit Testpuls)
Input characteristic clock sensitive
Giriş karakteristikleri Type 1
Input filter (digital) 0,5ms
1ms
2ms
3ms
5ms
10ms
20ms
50ms
100ms
200ms
0ms
Giriş filtresi 0 ms … 200 ms, adım adım ayarlanabilir
Giriş filtresi: parametrelerle ayarlanabilir (kanal-kanal) yes
Input current per channel for signal (1) typ. 3mA
Output current per channel 0,05A
Kısa devre akımı ≤ 25 mA
Signal frequency max. 50Hz
Kendinden güvenli Ex i yes
System supply voltage DC 5 V; via data contacts
Current consumption, system supply (5 V) 145mA
Field supply voltage DC 24 V; (Versorgung über Einspeisung Ex i UO = max. 27,3 V); über Leistungskontakte (Einspeisung über Messerkontakt; Weiterleitung über Federkontakt)
Current consumption, field supply (module with no external load) 20mA
İzolasyon 300 VAC system/field
Indicators LED (A-D) green/red: Status/Error I1 … I4; LED (E) red: Group error; LED (F-H) green/red: Diagnostics
Number of incoming power jumper contacts 2
Number of outgoing power jumper contacts 2
Current carrying capacity of the power jumper contacts 1A
ATEX Guideline EN/IEC 60079-0, -7, -11, -26, -31
Elektrik şebekesi, güvenliğe ilişkin bilgi Uo = 27.3 V; Io = 23 mA; Po = 157 mW; Characteristic: Linear
Reaktans Ex ia IIC Lo = 61 mH; Co = 64 nF
Reaktans Ex ia IIB Lo = 100 mH; Co = 552 nF
Reaktans Ex ia IIA Lo = 100 mH; Co = 2,28 µF
Reaktans Ex ia I Lo = 100 mH; Co = 2.95 µF
Reaktans (The above-listed ratings do not account for the coincidental occurrence of capacitances and inductances. For ratings taking the coincidental occurrence of capacitances and inductances into account, see manual)
Etiketleme ATEX, IECEx, Underwriters Laboratories Inc.
Connection technology: In-/Outputs 8 x CAGE CLAMP®
Connection type (1) Inputs/Outputs
Tek damarlı boylar 0,08 … 2,5 mm² / 28 … 14 AWG
İnce bükümlü kablolar 0,08 … 2,5 mm² / 28 … 14 AWG
Sıyırma uzunluğu 8 … 9 mm / 0.31 … 0.35 inch
Anschlussanforderung zulässige Leitungslänge 100m
Width 24 mm / 0.945 inch
Height 67,8 mm / 2.669 inch
DIN rayın üst kenarından yükseklik 60,6 mm / 2.386 inch
Depth 100 mm / 3.937 inch
Montaj tipi DIN 35 ray
Renk çok renkli
Gövde malzemesi Polycarbonate, polyamide 6.6
Ağırlık 92
Uygunluk işareti CE
Surrounding air (operating) temperature 0 … 55 °C
Surrounding air (storage) temperature -40 … 85 °C
Koruma sınıfı IP20
Kirlilik derecesi (5) 2 per IEC 61131-2
Çalışma yüksekliği 0 … 2000 m
Montaj pozisyonu horizontal (standing/lying) or vertical
Nısbi nem (yoğuşmasız) 95%
Titreşime dayanıklı 4g per IEC 60068-2-6
Darbe direnci 15g per IEC 60068-2-27
EMV-Störfestigkeit acc. to EN 61000-6-2, marine applications
EMU: 1 - enterferans emisyonu acc. to EN 61000-6-3, marine applications
Kirletici maddelere maruziyet Per IEC 60068-2-42 and IEC 60068-2-43
Permissible H2S contaminant concentration at a relative humidity 75 % 10ppm
Permissible SO2 contaminant concentration at a relative humidity 75 % 25ppm
Product Group 15 (Remote I/O)
SAP´den ambalaj tipi BOX
Country of origin DE
GTIN 4050821531432
Customs Tariff No. 85389099990

As Mnelko, we are a reliable partner in industrial automation solutions, offering high-quality and innovative products with a wide product range to meet all the needs of your business. Our product portfolio consists of solutions designed based on the principles of high performance, durability, and efficiency to support modern industrial processes.
All of our products ensure maximum reliability even in challenging working conditions and help your business operations run smoothly. The products we offer in industrial automation, energy management, cabling solutions, and many other areas adapt flexibly to the needs of different sectors.
Additionally, our products are manufactured using only high-quality materials and comply with international standards. Through the solutions we provide, we enable our customers to increase operational efficiency and optimize costs. Our company closely follows technological advancements and continuously offers innovative products to help our customers gain a competitive advantage.
On each of our product pages, you can find comprehensive information about technical details, areas of use, and product features. You can explore all the products you need to strengthen your industrial processes on our website and enjoy a seamless purchasing experience.