Fail-safe 8-channel digital input; 24VDC; PROFIsafe V2.0 iPar; yellowContact potential-free emergency stop buttons, safety safety switches, operating mode buttons, safety sensors and semiconductor outputs can be connected via the PROFIsafe input module 75x-662/000-003. The modules have 8 clocked inputs (I1 ... I8) fed by 2 different clocked outputs (T1 ... T2). Clock outputs are short circuit protected. Inputs are constantly monitored for reverse circuits and voltage supply from separate sources. Safety-related parameters (e.g. operating modes, shutdown test pulses, mismatch or filter times) can be set with WAGO-I/O-CHECK. The configuration tool can be easily integrated into engineering systems that support CC2 and CC3 ride-hailing interfaces (TCI). When changing modules, parameters are automatically downloaded to the control unit from the PROFIsafe-compatible iPar server, depending on the settings. The PROFIsafe address can be set using the DIP switch on the side of the module or via WAGO-I/O-CHECK. The modules support both PROFIsafe V1 (PROFIBUS) and V2 (PROFIBUS, PROFINET) protocols. Electrical isolation is provided between the bus and the field side by an optocoupler. Individual I/O modules can be arranged in any combination when configuring the fieldbus node. To protect the module against voltage surges (overvoltage protection in accordance with IEC 61000-4-5), the filter module 750-626 or an external surge filter must be used for the 24V power supply. For more information, see the product user manual (available in German and English).
Fail-safe 8-channel digital input; 24VDC; PROFIsafe V2.0 iPar; yellow
Contact potential-free emergency stop buttons, safety safety switches, operating mode buttons, safety sensors and semiconductor outputs can be connected via the PROFIsafe input module 75x-662/000-003.
The modules have 8 clocked inputs (I1 ... I8) fed by 2 different clocked outputs (T1 ... T2).
Clock outputs are short circuit protected. Inputs are constantly monitored for reverse circuits and voltage supply from separate sources. Safety-related parameters (e.g. operating modes, shutdown test pulses, mismatch or filter times) can be set with WAGO-I/O-CHECK.
The configuration tool can be easily integrated into engineering systems that support CC2 and CC3 ride-hailing interfaces (TCI).
When changing modules, parameters are automatically downloaded to the control unit from the PROFIsafe-compatible iPar server, depending on the settings. The PROFIsafe address can be set using the DIP switch on the side of the module or via WAGO-I/O-CHECK.
The modules support both PROFIsafe V1 (PROFIBUS) and V2 (PROFIBUS, PROFINET) protocols.
Electrical isolation is provided between the bus and the field side by an optocoupler.
Individual I/O modules can be arranged in any combination when configuring the fieldbus node.
To protect the module against voltage surges (overvoltage protection in accordance with IEC 61000-4-5), the filter module 750-626 or an external surge filter must be used for the 24V power supply.
For more information, see the product user manual (available in German and English).
| Number of digital inputs | 8 |
| Total number of channels (module) | 8 |
| Achievable safety classes | SIL 3; Cat. 4, PL e |
| Sinyal tipi | Voltage |
| Type of signal voltage | DC 24 V |
| Sensor connection | 8 x (sicherer Eingang mit Testpuls) |
| Input characteristic | clock sensitive |
| Giriş karakteristikleri | Type 1 |
| Input current per channel for signal (1) typ. | 2,2mA |
| Signal frequency max. | 50Hz |
| System supply voltage | DC 5 V; via data contacts |
| Current consumption, system supply (5 V) | 148mA |
| Field supply voltage | DC 24 V (-15 … +20 %); über Leistungskontakte (Einspeisung über Messerkontakt; Weiterleitung über Federkontakt) |
| Current consumption, field supply (module with no external load) | 20mA |
| İzolasyon | 500 V sistem/besleme |
| Indicators | LED (A-D) green/red: Status/Error I1 … I8; LED (E) red: Group error; LED (F-H) green/red: Diagnostics |
| Number of incoming power jumper contacts | 2 |
| Number of outgoing power jumper contacts | 2 |
| Current carrying capacity of the power jumper contacts | 10A |
| Connection technology: In-/Outputs | 16 x CAGE CLAMP® |
| Connection type (1) | Inputs/Outputs |
| Tek damarlı boylar | 0,08 … 2,5 mm² / 28 … 14 AWG |
| İnce bükümlü kablolar | 0,08 … 2,5 mm² / 28 … 14 AWG |
| Sıyırma uzunluğu | 8 … 9 mm / 0.31 … 0.35 inch |
| Width | 24 mm / 0.945 inch |
| Height | 67,8 mm / 2.669 inch |
| DIN rayın üst kenarından yükseklik | 60,6 mm / 2.386 inch |
| Depth | 100 mm / 3.937 inch |
| Montaj tipi | DIN 35 ray |
| Renk | sarı |
| Gövde malzemesi | Polycarbonate, polyamide 6.6 |
| Ağırlık | 98,5 |
| Uygunluk işareti | CE |
| Surrounding air (operating) temperature | 0 … 55 °C |
| Surrounding air (storage) temperature | -40 … 85 °C |
| Koruma sınıfı | IP20 |
| Kirlilik derecesi (5) | 2 per IEC 61131-2 |
| Çalışma yüksekliği | 0 … 2000 m |
| Montaj pozisyonu | horizontal (standing/lying) or vertical |
| Nısbi nem (yoğuşmasız) | 95% |
| Titreşime dayanıklı | 4g per IEC 60068-2-6 |
| Darbe direnci | 15g per IEC 60068-2-27 |
| EMV-Störfestigkeit | acc. to EN 61000-6-2, marine applications |
| EMU: |
acc. to EN 61000-6-4, marine applications |
| Kirletici maddelere maruziyet | Per IEC 60068-2-42 and IEC 60068-2-43 |
| Permissible H2S contaminant concentration at a relative humidity |
10ppm |
| Permissible SO2 contaminant concentration at a relative humidity |
25ppm |
| Product Group | 15 (Remote I/O) |
| SAP´den ambalaj tipi | BOX |
| Country of origin | DE |
| GTIN | 4050821038740 |
| Customs Tariff No. | 85389099990 |
As Mnelko, we are a reliable partner in industrial automation solutions, offering high-quality and innovative products with a wide product range to meet all the needs of your business. Our product portfolio consists of solutions designed based on the principles of high performance, durability, and efficiency to support modern industrial processes.
All of our products ensure maximum reliability even in challenging working conditions and help your business operations run smoothly. The products we offer in industrial automation, energy management, cabling solutions, and many other areas adapt flexibly to the needs of different sectors.
Additionally, our products are manufactured using only high-quality materials and comply with international standards. Through the solutions we provide, we enable our customers to increase operational efficiency and optimize costs. Our company closely follows technological advancements and continuously offers innovative products to help our customers gain a competitive advantage.
On each of our product pages, you can find comprehensive information about technical details, areas of use, and product features. You can explore all the products you need to strengthen your industrial processes on our website and enjoy a seamless purchasing experience.
All rights reserved. Mnelko Endüstriyel San. ve Tic.Ltd.Şti. 2024
