DALI/DSI Master Module; Light greyThe DALI standard (IEC 60929), a protocol between all manufacturers, ensures interoperability of electronic ballasts in lighting applications. This new standard replaces the 1–10V dimmer interface. DALI/DSI Master for WAGO-I/O-SYSTEM 750 is a 12 mm wide I/O module that fits all controllers of the 750 series. DALI Master can control up to 64 slaves. Each stave can be assigned to 16 separate groups and 16 separate settings. All combinations of DALI controls with other groups are possible with WAGO I/O SYSTEM 750. Several DALI masters can be connected to a single fieldbus node. The maximum number of modules that can be connected to a controller depends on the memory required by the application. WAGO I/O PRO 32 software is used to program fieldbus nodes. WAGO supports easy application programming with pre-programmed function blocks for DALI. DC/DC converter 288-895 is required to power the DALI Master. The DC/DC converter provides current up to 400mA and can supply 3 DALI lines with up to 130 mA each (see also "DALI/DSI Master Module"* user manual, section 1.1.1.7.3 "DALI Bus Line"). *Documentation is available in German and English. DSI is a proprietary interface developed by TRIDONIC ATCO. As with DALI, electronic ballasts can be digitally controlled by DSI. However, compared to DALI, the slaves of the DSI module cannot be addressed individually and feedback signals cannot be sent to the master. The maximum number of slaves controlled by the module is limited to 100 participants per line (100 participants * 2 mA = 200 mA). As for DALI, a DC/DC converter 288-895 is required to power DSI.
DALI/DSI Master Module; Light grey
The DALI standard (IEC 60929), a protocol between all manufacturers, ensures interoperability of electronic ballasts in lighting applications. This new standard replaces the 1–10V dimmer interface.
DALI/DSI Master for WAGO-I/O-SYSTEM 750 is a 12 mm wide I/O module that fits all controllers of the 750 series.
DALI Master can control up to 64 slaves. Each stave can be assigned to 16 separate groups and 16 separate settings.
All combinations of DALI controls with other groups are possible with WAGO I/O SYSTEM 750. Several DALI masters can be connected to a single fieldbus node. The maximum number of modules that can be connected to a controller depends on the memory required by the application.
WAGO I/O PRO 32 software is used to program fieldbus nodes. WAGO supports easy application programming with pre-programmed function blocks for DALI.
DC/DC converter 288-895 is required to power the DALI Master. The DC/DC converter provides current up to 400mA and can supply 3 DALI lines with up to 130 mA each (see also "DALI/DSI Master Module"* user manual, section 1.1.1.7.3 "DALI Bus Line"). *Documentation is available in German and English.
DSI is a proprietary interface developed by TRIDONIC ATCO. As with DALI, electronic ballasts can be digitally controlled by DSI. However, compared to DALI, the slaves of the DSI module cannot be addressed individually and feedback signals cannot be sent to the master. The maximum number of slaves controlled by the module is limited to 100 participants per line (100 participants * 2 mA = 200 mA). As for DALI, a DC/DC converter 288-895 is required to power DSI.
| Gerätespezifikation | DALI specification: DIN IEC 60929 (VDE 0712 Part 23) Only in conjunction with 288-895 DC/DC Converter; DSI specification: TRIDONIC ATCO SPECIFICATION 2.0 |
| Topoloji | Number of slaves (DALI): 64; Number of slaves (DSI): 100 |
| Çekilen akım (tip.) | 200 mA (DALI/DSI) |
| İletim kanalı | 1 |
| Bit genişliği | 1 byte kontrol/durum, 5 byte veri |
| Güç kaynağı | DALI/DSI: 18 V (extern) |
| System supply voltage | DC 5 V; via data contacts |
| Current consumption, system supply (5 V) | 30mA |
| İzolasyon | 1500 V DC DALI-bus/K-bus |
| Number of incoming power jumper contacts | 2 |
| Number of outgoing power jumper contacts | 2 |
| Connection technology: In-/Outputs | 8 x CAGE CLAMP® |
| Connection type (1) | Inputs/Outputs |
| Sıyırma uzunluğu | 8 … 9 mm / 0.31 … 0.35 inch |
| Width | 12 mm / 0.472 inch |
| Height | 69,8 mm / 2.748 inch |
| DIN rayın üst kenarından yükseklik | 62,6 mm / 2.465 inch |
| Depth | 100 mm / 3.937 inch |
| Montaj tipi | DIN 35 ray |
| Renk | açık gri |
| Gövde malzemesi | Polycarbonate, polyamide 6.6 |
| Ağırlık | 51,6 |
| Uygunluk işareti | CE |
| Surrounding air (operating) temperature | 0 … 55 °C |
| Surrounding air (storage) temperature | -40 … 85 °C |
| Koruma sınıfı | IP20 |
| Kirlilik derecesi (5) | 2 per IEC 61131-2 |
| Çalışma yüksekliği | 0 … 2000 m |
| Montaj pozisyonu | horizontal (standing/lying) or vertical |
| Nısbi nem (yoğuşmasız) | 95% |
| Titreşime dayanıklı | acc. to IEC 60068-2-6 |
| Darbe direnci | 15g per IEC 60068-2-27 |
| EMV-Störfestigkeit | acc. to EN 61000-6-2*, marine applications *Only in conjunction with 288-895 DC/DC Converter |
| EMU: |
acc. to EN 61000-6-3*, marine applications *Only in conjunction with 288-895 DC/DC Converter |
| Kirletici maddelere maruziyet | Per IEC 60068-2-42 and IEC 60068-2-43 |
| Permissible H2S contaminant concentration at a relative humidity |
10ppm |
| Permissible SO2 contaminant concentration at a relative humidity |
25ppm |
| Product Group | 15 (Remote I/O) |
| SAP´den ambalaj tipi | BOX |
| Country of origin | DE |
| GTIN | 4045454394004 |
| Customs Tariff No. | 85389099990 |
As Mnelko, we are a reliable partner in industrial automation solutions, offering high-quality and innovative products with a wide product range to meet all the needs of your business. Our product portfolio consists of solutions designed based on the principles of high performance, durability, and efficiency to support modern industrial processes.
All of our products ensure maximum reliability even in challenging working conditions and help your business operations run smoothly. The products we offer in industrial automation, energy management, cabling solutions, and many other areas adapt flexibly to the needs of different sectors.
Additionally, our products are manufactured using only high-quality materials and comply with international standards. Through the solutions we provide, we enable our customers to increase operational efficiency and optimize costs. Our company closely follows technological advancements and continuously offers innovative products to help our customers gain a competitive advantage.
On each of our product pages, you can find comprehensive information about technical details, areas of use, and product features. You can explore all the products you need to strengthen your industrial processes on our website and enjoy a seamless purchasing experience.
All rights reserved. Mnelko Endüstriyel San. ve Tic.Ltd.Şti. 2024
