Power source; 24VDC; Intrinsically safe; Light greyThis supply module supplies power to all intrinsically safe 750 Series Ex i modules. Additionally, the module separates the intrinsically safe from the non-intrinsically safe part of the WAGO-I/O-SYSTEM 750 and monitors the power supply to the Ex i segment. The input and output sides are electrically isolated from each other. The maximum current fed from the supply module is 1.0 A. When setting the Ex-i segment it must be ensured that this total current is not exceeded. Its electronic monitoring automatically turns off the output voltage in case of short circuit or overload. After the error disappears, the output voltage is turned on again in approximately 10 seconds. Warning: If more than one supply module per station is required due to load conditions, four separation modules (750‐616) must be placed between the intrinsically safe sections. LED indicators: LED green (input voltage) LED green/red (output voltage present/not present) Note:Note: General information on explosion protection (e.g. mounting regulations) is available in the WAGO-I/O-SYSTEM 750 manuals!
Power source; 24VDC; Intrinsically safe; Light grey
This supply module supplies power to all intrinsically safe 750 Series Ex i modules. Additionally, the module separates the intrinsically safe from the non-intrinsically safe part of the WAGO-I/O-SYSTEM 750 and monitors the power supply to the Ex i segment. The input and output sides are electrically isolated from each other.
The maximum current fed from the supply module is 1.0 A. When setting the Ex-i segment it must be ensured that this total current is not exceeded.
Its electronic monitoring automatically turns off the output voltage in case of short circuit or overload. After the error disappears, the output voltage is turned on again in approximately 10 seconds.
Warning:If more than one supply module per station is required due to load conditions, four separation modules (750‐616) must be placed between the intrinsically safe sections.
LED indicators:Note: General information on explosion protection (e.g. mounting regulations) is available in the WAGO-I/O-SYSTEM 750 manuals!
| Giriş gerilimi | 24 VDC (-%25 … +%30) |
| Sigorta | elektronik |
| Güç tüketimi Pmax. | 29 W |
| Kendinden güvenli Ex i | yes |
| System supply voltage | DC 5 V; via data contacts |
| Current consumption, system supply (5 V) | 7,5mA |
| Field supply voltage | DC 24 V (-25 … +30 %); (adjacent Ex i modules are supplied with UO = max. 27.3 V); via power jumper contacts (power supply via CAGE CLAMP® connection; transmission via spring contact) |
| Güç kaybı PV | < 5 W |
| Number of outgoing power jumper contacts | 2 |
| Current carrying capacity of the power jumper contacts | 1A |
| ATEX Guideline | EN/IEC 60079-0, -7, -11, -26, -31 |
| Güç kaynağı, giriş | Un = 24 VDC (-25 % … +30 %); Pmax = 29 W; Um = 253 V |
| Güç kaynağı, çıkış | Uo = 27.3 V (intrinsically safe output voltage acc. to type of protection ia); In = 1 A |
| Etiketleme | ATEX, IECEx, INMETRO, Underwriters Laboratories Inc. |
| Connection technology: field supply | 2 x CAGE CLAMP® |
| Connection type (1) | Field supply |
| Tek damarlı boylar | 0,08 … 1,5 mm² / 28 … 14 AWG |
| İnce bükümlü kablolar | 0,08 … 1,5 mm² / 28 … 14 AWG |
| Sıyırma uzunluğu | 5 … 6 mm / 0.2 … 0.24 inch |
| Not (iletken kesiti) | 14 AWG: THHN, THWN |
| Width | 48 mm / 1.89 inch |
| Height | 70,9 mm / 2.791 inch |
| DIN rayın üst kenarından yükseklik | 63,7 mm / 2.508 inch |
| Depth | 100 mm / 3.937 inch |
| Montaj tipi | DIN 35 ray |
| Renk | açık gri |
| Gövde malzemesi | Polycarbonate, polyamide 6.6 |
| Ağırlık | 167 |
| Uygunluk işareti | CE |
| Surrounding air (operating) temperature | 0 … 55 °C |
| Surrounding air (storage) temperature | -40 … 85 °C |
| Koruma sınıfı | IP20 |
| Kirlilik derecesi (5) | 2 per IEC 61131-2 |
| Çalışma yüksekliği | 0 … 2000 m |
| Montaj pozisyonu | horizontal (standing/lying) or vertical |
| Nısbi nem (yoğuşmasız) | 95% |
| Titreşime dayanıklı | 4g per IEC 60068-2-6 |
| Darbe direnci | 15g per IEC 60068-2-27 |
| EMV-Störfestigkeit | acc. to EN 61000-6-2, marine applications |
| EMU: |
acc. to EN 61000-6-3, marine applications |
| Kirletici maddelere maruziyet | Per IEC 60068-2-42 and IEC 60068-2-43 |
| Permissible H2S contaminant concentration at a relative humidity |
10ppm |
| Permissible SO2 contaminant concentration at a relative humidity |
25ppm |
| Product Group | 15 (Remote I/O) |
| SAP´den ambalaj tipi | BOX |
| Country of origin | DE |
| GTIN | 4045454971564 |
| Customs Tariff No. | 85389091890 |
As Mnelko, we are a reliable partner in industrial automation solutions, offering high-quality and innovative products with a wide product range to meet all the needs of your business. Our product portfolio consists of solutions designed based on the principles of high performance, durability, and efficiency to support modern industrial processes.
All of our products ensure maximum reliability even in challenging working conditions and help your business operations run smoothly. The products we offer in industrial automation, energy management, cabling solutions, and many other areas adapt flexibly to the needs of different sectors.
Additionally, our products are manufactured using only high-quality materials and comply with international standards. Through the solutions we provide, we enable our customers to increase operational efficiency and optimize costs. Our company closely follows technological advancements and continuously offers innovative products to help our customers gain a competitive advantage.
On each of our product pages, you can find comprehensive information about technical details, areas of use, and product features. You can explore all the products you need to strengthen your industrial processes on our website and enjoy a seamless purchasing experience.
All rights reserved. Mnelko Endüstriyel San. ve Tic.Ltd.Şti. 2024
