Güç Kaynağı; 24 VDC; Kendinden güvenli; Aşırı; koyu gri This supply module powers all intrinsically safe 750 XTR Series Ex i Modules. It also monitors power supply to the downstream Ex i segment and separates the intrinsically safe from the non-intrinsically safe section of the WAGO-I/O-SYSTEM 750 XTR. Input and output sides are electrically isolated from each other. Maximum supply current available to all connected modules is 1.0 A. When configurating the Ex i segment, the total current must not be exceeded.In the event of a short circuit or overload, electronic monitoring automatically switches off the output voltage. After eliminating the fault, the output voltage is reactivated within approximately ten seconds.If, due to load conditions, more than one supply module is required per station, four spacer modules (750‐616/040-000) must be placed between the intrinsically safe sections.Indicators:Green LED (input voltage)Green/red LED (output voltage available/not available)The device is ideal for operation in harsh environments thanks to:Extended temperature rangeGreater immunity to impulse voltages and electromagnetic interferenceHigher vibration and shock resistanceNote:General information (e.g., installation regulations) on explosion protection is available in the WAGO-I/O-SYSTEM 750 XTR manuals!
Güç Kaynağı; 24 VDC; Kendinden güvenli; Aşırı; koyu gri
This supply module powers all intrinsically safe 750 XTR Series Ex i Modules. It also monitors power supply to the downstream Ex i segment and separates the intrinsically safe from the non-intrinsically safe section of the WAGO-I/O-SYSTEM 750 XTR. Input and output sides are electrically isolated from each other.
Maximum supply current available to all connected modules is 1.0 A. When configurating the Ex i segment, the total current must not be exceeded.
In the event of a short circuit or overload, electronic monitoring automatically switches off the output voltage. After eliminating the fault, the output voltage is reactivated within approximately ten seconds.
If, due to load conditions, more than one supply module is required per station, four spacer modules (750‐616/040-000) must be placed between the intrinsically safe sections.
Indicators:
The device is ideal for operation in harsh environments thanks to:
General information (e.g., installation regulations) on explosion protection is available in the WAGO-I/O-SYSTEM 750 XTR manuals!
| Sigorta | elektronik |
| Güç tüketimi Pmax. | 29 W |
| Bit genişliği | 2 bit (giriş gerilimi hatası, sigorta attı) |
| Kendinden güvenli Ex i | yes |
| System supply voltage | DC 5 V; via data contacts |
| Current consumption, system supply (5 V) | 7,5mA |
| Field supply voltage | DC 24 V (-25 … +30 %); via power jumper contacts (power supply via CAGE CLAMP® connection; transmission via spring contact); Specified values for surrounding air temperatures: +15 … +35 °C; for -40 … +55 °C: 24 V (-25 … +20 %); for +55 … +70 °C: 24 V (-25 … +10 %); Lower limit in all temperature ranges: -27.5 % (including 15 % residual ripple) |
| Güç kaybı PV | < 5W |
| Rated surge voltage | 1 kV; Rated surge voltage between intrinsically safe and non-intrinsically safe circuits: 1.5 kV (EN 60079-11) |
| Number of outgoing power jumper contacts | 2 |
| Current carrying capacity of the power jumper contacts | 1A |
| ATEX Guideline | EN/IEC 60079-0, -7, -11 |
| Güç kaynağı, giriş | Un = 24 VDC; Pmax = 29 W; Um = 253 V |
| Güç kaynağı, çıkış | Uo = 26.8 V (intrinsically safe output voltage per protection level ia); In = 1 A |
| Connection technology: field supply | 2 x CAGE CLAMP® |
| Connection type (1) | Field supply |
| Tek damarlı boylar | 0,25 … 1,5 mm² / 24 … 14 AWG |
| İnce bükümlü kablolar | 0,25 … 1,5 mm² / 24 … 14 AWG |
| Sıyırma uzunluğu | 5 … 6 mm / 0.2 … 0.24 inch |
| Width | 48 mm / 1.89 inch |
| Height | 70,9 mm / 2.791 inch |
| DIN rayın üst kenarından yükseklik | 63,7 mm / 2.508 inch |
| Depth | 100 mm / 3.937 inch |
| Montaj tipi | DIN 35 ray |
| Renk | koyu gri |
| Gövde malzemesi | Polycarbonate, polyamide 6.6 |
| Ağırlık | 168,3 |
| Uygunluk işareti | CE |
| Surrounding air (operating) temperature | -40 … 70 °C |
| Surrounding air (storage) temperature | -40 … 85 °C |
| Koruma sınıfı | IP20 |
| Kirlilik derecesi (5) | 2 per IEC 61131-2 |
| Çalışma yüksekliği | without temperature derating: 0 … 2000 m; with temperature derating: 2000 … 5000 m (0.5 K/100 m); max.: 5000 m |
| Montaj pozisyonu | horizontal (standing/lying) or vertical |
| Nısbi nem (yoğuşmasız) | 95% |
| Relative humidity | Short-term condensation per Class 3K7/IEC EN 60721-3-3 and E DIN 40046-721-3 (except wind-driven precipitation, water and ice formation) |
| Titreşime dayanıklı | acc. to IEC 60068-2-6 (acceleration: 5g), EN 60870-2-2, IEC 60721-3-1, -3 |
| Darbe direnci | per IEC 60068-2-27 (15g/11 ms/half-sine/1,000 shocks; 25g/6 ms/1,000 shocks), EN 61373 |
| EMV-Störfestigkeit | acc. to EN 61000-6-1, -2, EN 61131-2, marine applications, EN 60255-26, EN 60870-2-1, EN 61850-3, IEC 61000-6-5, IEEE 1613, VDEW: 1994 |
| EMU: |
acc. to EN 61000-6-3, -4, EN 61131-2, EN 60255-26, marine applications, EN 60870-2-1, EN 61850-3 |
| Kirletici maddelere maruziyet | Per IEC 60068-2-42 and IEC 60068-2-43 |
| Permissible H2S contaminant concentration at a relative humidity |
10ppm |
| Permissible SO2 contaminant concentration at a relative humidity |
25ppm |
| SAP´den ambalaj tipi | BOX |
| Country of origin | DE |
| GTIN | 4055143649575 |
| Customs Tariff No. | 85389091890 |
As Mnelko, we are a reliable partner in industrial automation solutions, offering high-quality and innovative products with a wide product range to meet all the needs of your business. Our product portfolio consists of solutions designed based on the principles of high performance, durability, and efficiency to support modern industrial processes.
All of our products ensure maximum reliability even in challenging working conditions and help your business operations run smoothly. The products we offer in industrial automation, energy management, cabling solutions, and many other areas adapt flexibly to the needs of different sectors.
Additionally, our products are manufactured using only high-quality materials and comply with international standards. Through the solutions we provide, we enable our customers to increase operational efficiency and optimize costs. Our company closely follows technological advancements and continuously offers innovative products to help our customers gain a competitive advantage.
On each of our product pages, you can find comprehensive information about technical details, areas of use, and product features. You can explore all the products you need to strengthen your industrial processes on our website and enjoy a seamless purchasing experience.
All rights reserved. Mnelko Endüstriyel San. ve Tic.Ltd.Şti. 2024
