2-channel analog output; 0 … 20 mA; Intrinsically safe; blueThe analog output module transmits intrinsically safe 0-20 mA signals in hazardous Zone 1. WAGO-I/O-SYSTEM 750 must be installed in Zone 2 or a non-hazardous area. Power is taken from the power bridge contacts. Outputs are short circuit protected. LED indicators: Green LED (output status) Field and system levels are electrically isolated. Note:Note: The analog output module must only be operated via the Ex i 24VDC power supply! General information on explosion protection (e.g. mounting regulations) is available in the WAGO-I/O-SYSTEM 750 manuals!
2-channel analog output; 0 … 20 mA; Intrinsically safe; blue
The analog output module transmits intrinsically safe 0-20 mA signals in hazardous Zone 1.
WAGO-I/O-SYSTEM 750 must be installed in Zone 2 or a non-hazardous area.
Power is taken from the power bridge contacts.
Outputs are short circuit protected.
LED indicators:
Field and system levels are electrically isolated.
Note: The analog output module must only be operated via the Ex i 24VDC power supply!
General information on explosion protection (e.g. mounting regulations) is available in the WAGO-I/O-SYSTEM 750 manuals!
| Number of analog outputs | 2 |
| Total number of channels (module) | 2 |
| Sinyal tipi | Current |
| Type of signal current | DC 0 … 20 mA |
| Actuator connection | 2 x (2-conductor) |
| Çözünürlük [bit] | 12Bit |
| Güç tüketimi Pmax. | 1,5 W |
| Bit genişliği | 2 x 16 bit veri |
| Load impedance (output/current) | ≤ 500 Ω |
| Çevirme süresi (tip.) | 2ms |
| Messfehler, Bezugstemperatur | 25°C |
| Messfehler, Abweichung max. vom Messbereichsendwert | 0,2% |
| Temperaturfehler max. vom Messbereichsendwert | 0,01%/K |
| Kendinden güvenli Ex i | yes |
| Doğrusallık | ± 2 LSB |
| System supply voltage | DC 5 V; via data contacts |
| Current consumption, system supply (5 V) | 21mA |
| Field supply voltage | DC 24 V; (Versorgung über Einspeisung Ex i UO = max. 27,3 V); über Leistungskontakte (Einspeisung über Messerkontakt; Weiterleitung über Federkontakt) |
| Current consumption, field supply (module with no external load) | 19mA |
| Güç kaybı PV | 0,9 W |
| İzolasyon | 300 VAC system/field |
| Number of incoming power jumper contacts | 2 |
| Number of outgoing power jumper contacts | 2 |
| Current carrying capacity of the power jumper contacts | 1A |
| ATEX Guideline | EN/IEC 60079-0, -7, -11, -26, -31 |
| Elektrik şebekesi, güvenliğe ilişkin bilgi | Uo = 27.3 V ; Io = 57.5 mA; Po = 392 mW; Characteristic: Linear |
| Reaktans Ex ia IIC | Lo = 11 mH; Co = 88 nF |
| Reaktans Ex ia IIB | Lo = 56 mH; Co = 680 nF |
| Reaktans Ex ia IIA | Lo = 90 mH; Co = 2.2 μF |
| Reaktans Ex ia I | Lo = 110 mH; Co = 3.5 µF |
| Reaktans | (The above-listed ratings do not account for the coincidental occurrence of capacitances and inductances. For ratings taking the coincidental occurrence of capacitances and inductances into account, see manual) |
| Etiketleme | ATEX, IECEx, INMETRO, Underwriters Laboratories Inc. |
| Connection technology: In-/Outputs | 16 x CAGE CLAMP® |
| Connection type (1) | Inputs/Outputs |
| Tek damarlı boylar | 0,08 … 2,5 mm² / 28 … 14 AWG |
| İnce bükümlü kablolar | 0,08 … 2,5 mm² / 28 … 14 AWG |
| Sıyırma uzunluğu | 8 … 9 mm / 0.31 … 0.35 inch |
| Width | 24 mm / 0.945 inch |
| Height | 67,8 mm / 2.669 inch |
| DIN rayın üst kenarından yükseklik | 60,6 mm / 2.386 inch |
| Depth | 100 mm / 3.937 inch |
| Montaj tipi | DIN 35 ray |
| Renk | mavi |
| Gövde malzemesi | Polycarbonate, polyamide 6.6 |
| Ağırlık | 90,1 |
| Uygunluk işareti | CE |
| Surrounding air (operating) temperature | 0 … 55 °C |
| Surrounding air (storage) temperature | -40 … 85 °C |
| Koruma sınıfı | IP20 |
| Kirlilik derecesi (5) | 2 per IEC 61131-2 |
| Çalışma yüksekliği | 0 … 2000 m |
| Montaj pozisyonu | horizontal (standing/lying) or vertical |
| Nısbi nem (yoğuşmasız) | 95% |
| Titreşime dayanıklı | 4g per IEC 60068-2-6 |
| Darbe direnci | 15g per IEC 60068-2-27 |
| EMV-Störfestigkeit | acc. to EN 61000-6-2, marine applications |
| EMU: |
acc. to EN 61000-6-3, marine applications |
| Kirletici maddelere maruziyet | Per IEC 60068-2-42 and IEC 60068-2-43 |
| Permissible H2S contaminant concentration at a relative humidity |
10ppm |
| Permissible SO2 contaminant concentration at a relative humidity |
25ppm |
| Product Group | 15 (Remote I/O) |
| SAP´den ambalaj tipi | BOX |
| Country of origin | DE |
| GTIN | 4045454725570 |
| Customs Tariff No. | 85389099990 |
As Mnelko, we are a reliable partner in industrial automation solutions, offering high-quality and innovative products with a wide product range to meet all the needs of your business. Our product portfolio consists of solutions designed based on the principles of high performance, durability, and efficiency to support modern industrial processes.
All of our products ensure maximum reliability even in challenging working conditions and help your business operations run smoothly. The products we offer in industrial automation, energy management, cabling solutions, and many other areas adapt flexibly to the needs of different sectors.
Additionally, our products are manufactured using only high-quality materials and comply with international standards. Through the solutions we provide, we enable our customers to increase operational efficiency and optimize costs. Our company closely follows technological advancements and continuously offers innovative products to help our customers gain a competitive advantage.
On each of our product pages, you can find comprehensive information about technical details, areas of use, and product features. You can explore all the products you need to strengthen your industrial processes on our website and enjoy a seamless purchasing experience.
All rights reserved. Mnelko Endüstriyel San. ve Tic.Ltd.Şti. 2024
