2-channel analog output; 0/4 … 20 mA; 16 bits; 6 ... 18 VDC; Extreme; dark greyThis analog output module produces 0/4–20 mA output currents or 6–18 V output voltages for the field. Output intervals can be set with WAGO‐I/O‐CHECK or GSD files. The module has two short-circuit protected output channels and allows direct connection of 2-wire actuators to AO 1 and ground or AO 2 and ground. Signals are output via AO 1 or AO 2. In addition, the sensing lines of 4-wire actuators can be connected to -Sense AO1 and +Sense AO1 or -Sense AO2 and +Sense AO2. Both output channels have a common ground potential. The output signal is electrically isolated and transmitted with 16-bit resolution. Both internal system and field side supply are used to power the module. The module is very suitable for operation in harsh environmental conditions: - remarkably wide temperature range - high dielectric strength and EMC resistance - high vibration resistance
2-channel analog output; 0/4 … 20 mA; 16 bits; 6 ... 18 VDC; Extreme; dark grey
This analog output module produces 0/4–20 mA output currents or 6–18 V output voltages for the field.
Output intervals can be set with WAGO‐I/O‐CHECK or GSD files.
The module has two short-circuit protected output channels and allows direct connection of 2-wire actuators to AO 1 and ground or AO 2 and ground. Signals are output via AO 1 or AO 2. In addition, the sensing lines of 4-wire actuators can be connected to -Sense AO1 and +Sense AO1 or -Sense AO2 and +Sense AO2.
Both output channels have a common ground potential.
The output signal is electrically isolated and transmitted with 16-bit resolution.
Both internal system and field side supply are used to power the module.
The module is very suitable for operation in harsh environmental conditions:
- remarkably wide temperature range
- high dielectric strength and EMC resistance
- high vibration resistance
| Number of analog outputs | 2 |
| Total number of channels (module) | 2 |
| Sinyal tipi | Current Voltage |
| Type of signal current | DC 0 … 20 mA; DC 4 … 20 mA |
| Type of signal voltage | DC 6 … 18 V |
| Configurable type of signal | yes |
| Actuator connection | 2 x (2-conductor, 4 Leiter) |
| Çözünürlük [bit] | 16Bit |
| Bit genişliği | 2 x 16 bit veri 2 x 8 bit kontrol/durum (isteğe bağlı) |
| Load impedance (output/voltage) | ≥ 1,8 kΩ |
| Load impedance (output/current) | ≤ 500 Ω |
| Çevirme süresi (tip.) | 5ms |
| Messfehler, Bezugstemperatur | 25°C |
| Messfehler, Abweichung max. vom Messbereichsendwert | 0,05% |
| Sıcaklık katsayısı | < ± 100 ppm |
| Toparlanma süresi (tip.) | 0,3ms |
| System supply voltage | DC 5 V; via data contacts |
| Current consumption, system supply (5 V) | 95mA |
| Field supply voltage | DC 24 V (-15 … +30 %); über Leistungskontakte (Einspeisung über Messerkontakt; Weiterleitung über Federkontakt); angegebene Werte für Umgebungstemperaturen: +15 … +35 °C; für −40 … +55 °C: 24 V (min. … +20 %); für +55 … +70 °C: 24 V (min. … +10 %); Spannungsbereich min.: 21,6 V; Strombereich min.: 20,4 V; Untergrenze in allen Temperaturbereichen: −27,5 % (inklusive 15 % Restwelligkeit) |
| Dielektrik dayanımı | AC 510 V/DC 775 V; gemäß EN 60870-2-1 |
| Rated surge voltage | 1 kV |
| Number of incoming power jumper contacts | 2 |
| Number of outgoing power jumper contacts | 2 |
| Current carrying capacity of the power jumper contacts | 10A |
| Connection technology: In-/Outputs | 8 x CAGE CLAMP® |
| Connection type (1) | Inputs/Outputs |
| Tek damarlı boylar | 0,25 … 2,5 mm² / 24 … 14 AWG |
| İnce bükümlü kablolar | 0,25 … 2,5 mm² / 24 … 14 AWG |
| Sıyırma uzunluğu | 8 … 9 mm / 0.31 … 0.35 inch |
| Width | 12 mm / 0.472 inch |
| Height | 67,8 mm / 2.669 inch |
| DIN rayın üst kenarından yükseklik | 60,6 mm / 2.386 inch |
| Depth | 100 mm / 3.937 inch |
| Montaj tipi | DIN 35 ray |
| Renk | koyu gri |
| Gövde malzemesi | Polycarbonate, polyamide 6.6 |
| Ağırlık | 51 |
| Uygunluk işareti | CE |
| Surrounding air (operating) temperature | -40 … 70 °C |
| Surrounding air (storage) temperature | -40 … 85 °C |
| Koruma sınıfı | IP20 |
| Kirlilik derecesi (5) | 2 per IEC 61131-2 |
| Çalışma yüksekliği | without temperature derating: 0 … 2000 m; with temperature derating: 2000 … 5000 m (0.5 K/100 m); max.: 5000 m |
| Montaj pozisyonu | horizontal (standing/lying) or vertical |
| Nısbi nem (yoğuşmasız) | 95% |
| Relative humidity | Short-term condensation per Class 3K7/IEC EN 60721-3-3 and E DIN 40046-721-3 (except wind-driven precipitation, water and ice formation) |
| Titreşime dayanıklı | acc. to IEC 60068-2-6 (acceleration: 5g), EN 60870-2-2, IEC 60721-3-1, -3, EN 50155, EN 61373 |
| Darbe direnci | acc. to IEC 60068-2-27 (15g/11 ms/half-sine/1000 shocks; 25g/6 ms/1000 shocks), EN 50155, EN 61373 |
| EMV-Störfestigkeit | acc. to EN 61000-6-1, -2, EN 61131-2, marine applications, EN 50121-3-2, -4, -5, EN 60255-26, EN 60870-2-1, EN 61850-3, IEC 61000-6-5, IEEE 1613, VDEW: 1994 |
| EMU: |
acc. to EN 61000-6-3, -4, EN 61131-2, EN 60255-26, marine applications, EN 60870-2-1, EN 61850-3, EN 50121-3-2, EN 50121-4, -5 |
| Kirletici maddelere maruziyet | Per IEC 60068-2-42 and IEC 60068-2-43 |
| Permissible H2S contaminant concentration at a relative humidity |
10ppm |
| Permissible SO2 contaminant concentration at a relative humidity |
25ppm |
| Product Group | 15 (Remote I/O) |
| SAP´den ambalaj tipi | BOX |
| Country of origin | DE |
| GTIN | 4050821460367 |
| Customs Tariff No. | 85389099990 |
As Mnelko, we are a reliable partner in industrial automation solutions, offering high-quality and innovative products with a wide product range to meet all the needs of your business. Our product portfolio consists of solutions designed based on the principles of high performance, durability, and efficiency to support modern industrial processes.
All of our products ensure maximum reliability even in challenging working conditions and help your business operations run smoothly. The products we offer in industrial automation, energy management, cabling solutions, and many other areas adapt flexibly to the needs of different sectors.
Additionally, our products are manufactured using only high-quality materials and comply with international standards. Through the solutions we provide, we enable our customers to increase operational efficiency and optimize costs. Our company closely follows technological advancements and continuously offers innovative products to help our customers gain a competitive advantage.
On each of our product pages, you can find comprehensive information about technical details, areas of use, and product features. You can explore all the products you need to strengthen your industrial processes on our website and enjoy a seamless purchasing experience.
All rights reserved. Mnelko Endüstriyel San. ve Tic.Ltd.Şti. 2024
