alt
alt

750-539
4-channel digital output

4 kanallı dijital çıkış; 24 VDC; Valf; Kendinden güvenli; açık mavi The digital output module controls actuators in the hazardous areas of Zone 0+1. Intrinsically safe valves can be directly controlled.The WAGO 750 I/O-SYSTEM must be installed either in Zone 2 or in a non-hazardous area.All outputs are electronically short circuit-protected.LEDs:Green LED (output status)Red LED (wire breakage, short circuit)Electrically isolated field and system levelsNote:The digital output module must only be operated via Ex i 24VDC power supply!General information (e.g., installation regulations) on explosion protection is available in the WAGO-I/O-SYSTEM 750 manuals!

4 kanallı dijital çıkış; 24 VDC; Valf; Kendinden güvenli; açık mavi


The digital output module controls actuators in the hazardous areas of Zone 0+1.

Intrinsically safe valves can be directly controlled.

The WAGO 750 I/O-SYSTEM must be installed either in Zone 2 or in a non-hazardous area.

All outputs are electronically short circuit-protected.

LEDs:

  • Green LED (output status)
  • Red LED (wire breakage, short circuit)

Electrically isolated field and system levels


Note:


The digital output module must only be operated via Ex i 24VDC power supply!

General information (e.g., installation regulations) on explosion protection is available in the WAGO-I/O-SYSTEM 750 manuals!

Number of digital outputs 4
Total number of channels (module) 4
Sinyal tipi Voltage
Type of signal voltage DC 24 V
Actuator connection 4 x (2-conductor)
Output characteristic high-side switching
Yük tipi rezistif, endüktif, lambalar
Güç tüketimi Pmax. 4,86 W (bei Ausgangsstrom von je 47 mA)
Datenbreite Eingangsdaten (intern) max. 4Bit
Datenbreite Ausgangsdaten (intern) max. 4Bit
Kendinden güvenli Ex i yes
System supply voltage DC 5 V; via data contacts
Current consumption, system supply (5 V) 20mA
Field supply voltage DC 24 V; (Versorgung über Einspeisung Ex i UO = max. 27,3 V); über Leistungskontakte (Einspeisung über Messerkontakt; Weiterleitung über Federkontakt)
Current consumption, field supply (module with no external load) 10mA
İzolasyon 300 VAC system/field
Number of incoming power jumper contacts 2
Number of outgoing power jumper contacts 2
Current carrying capacity of the power jumper contacts 1A
ATEX Guideline EN/IEC 60079-0, -7, -11, -26, -31
Elektrik şebekesi, güvenliğe ilişkin bilgi Uo = 27,3 V; Io = 117,5 mA; Po = 800,1 mW; Kennlinie: Linear
Reaktans Ex ia IIC Lo = 13 µH; Co = 88 nF
Reaktans Ex ia IIB Lo = 8,1 mH; Co = 683 nF
Reaktans Ex ia IIA Lo = 14 mH; Co = 2,28 μF
Reaktans Ex ia I Lo = 21 mH; Co = 540 nF
Reaktans Reaktanzen ohne Berücksichtigung der Gleichzeitigkeit von L und C
Etiketleme ATEX, IECEx, INMETRO, Underwriters Laboratories Inc.
Connection technology: In-/Outputs 16 x CAGE CLAMP®
Connection type (1) Inputs/Outputs
Tek damarlı boylar 0,08 … 2,5 mm² / 28 … 14 AWG
İnce bükümlü kablolar 0,08 … 2,5 mm² / 28 … 14 AWG
Sıyırma uzunluğu 8 … 9 mm / 0.31 … 0.35 inch
Width 24 mm
Height 67,8 mm / 2.669 inch
DIN rayın üst kenarından yükseklik 60,6 mm / 2.386 inch
Depth 100 mm / 3.937 inch
Montaj tipi DIN 35 ray
Renk açık mavi
Gövde malzemesi Polycarbonate, polyamide 6.6
Ağırlık 88,5
Uygunluk işareti CE
Surrounding air (operating) temperature 0 … 55 °C
Surrounding air (storage) temperature -40 … 85 °C
Koruma sınıfı IP20
Kirlilik derecesi (5) 2 per IEC 61131-2
Çalışma yüksekliği 0 … 2000 m
Montaj pozisyonu horizontal (standing/lying) or vertical
Nısbi nem (yoğuşmasız) 95%
Titreşime dayanıklı acc. to IEC 60068-2-6
Darbe direnci 15g per IEC 60068-2-27
EMV-Störfestigkeit acc. to EN 61000-6-2, marine applications
EMU: 1 - enterferans emisyonu acc. to EN 61000-6-3, marine applications
Kirletici maddelere maruziyet Per IEC 60068-2-42 and IEC 60068-2-43
Permissible H2S contaminant concentration at a relative humidity 75 % 10ppm
Permissible SO2 contaminant concentration at a relative humidity 75 % 25ppm
SAP´den ambalaj tipi BOX
Country of origin DE
GTIN 4055143514149
Customs Tariff No. 85371098990

As Mnelko, we are a reliable partner in industrial automation solutions, offering high-quality and innovative products with a wide product range to meet all the needs of your business. Our product portfolio consists of solutions designed based on the principles of high performance, durability, and efficiency to support modern industrial processes.
All of our products ensure maximum reliability even in challenging working conditions and help your business operations run smoothly. The products we offer in industrial automation, energy management, cabling solutions, and many other areas adapt flexibly to the needs of different sectors.
Additionally, our products are manufactured using only high-quality materials and comply with international standards. Through the solutions we provide, we enable our customers to increase operational efficiency and optimize costs. Our company closely follows technological advancements and continuously offers innovative products to help our customers gain a competitive advantage.
On each of our product pages, you can find comprehensive information about technical details, areas of use, and product features. You can explore all the products you need to strengthen your industrial processes on our website and enjoy a seamless purchasing experience.