1 channel relay output; 250 VAC; 16A; Potentialless; 1 normally open contact; Light greyThe connected actuator or load is switched via the relay output module. To trigger the relays, 24VDC voltage supply is taken from the power bridge contacts. The switching status of the relay is indicated by the manual switch (1/0). The operating mode can be set using the manual/automatic selection button. The mode status is indicated by an LED and status bits in the process image. Manual: Coil triggering is interrupted. Activation is done only with red manual operation keys. Automatic: It is operated via the relay control system. Manual status change via the manual operation switch is canceled by the control system in less than 500 ms. The manual switch can also be used without 24V supply to turn the output ON. The relay meets the overload and short circuit requirements of both international standards IEC and DIN EN 61810 part 1 /VDE 0435 part 201 and IEC and DIN EN 61036 /61037.
1 channel relay output; 250 VAC; 16A; Potentialless; 1 normally open contact; Light grey
The connected actuator or load is switched via the relay output module. To trigger the relays, 24VDC voltage supply is taken from the power bridge contacts.
The switching status of the relay is indicated by the manual switch (1/0). The operating mode can be set using the manual/automatic selection button. The mode status is indicated by an LED and status bits in the process image.
Manual: Coil triggering is interrupted. Activation is done only with red manual operation keys.
Automatic: It is operated via the relay control system. Manual status change via the manual operation switch is canceled by the control system in less than 500 ms.
The manual switch can also be used without 24V supply to turn the output ON.
The relay meets the overload and short circuit requirements of both international standards IEC and DIN EN 61810 part 1 /VDE 0435 part 201 and IEC and DIN EN 61036 /61037.
| Number of digital outputs | 1 |
| Total number of channels (module) | 1 |
| Actuator connection | 1 x (1-conductor) |
| Output switching design | 1 make contact relay |
| Output characteristic | potential-free |
| Switching voltage (max.) | AC 440V |
| Switching current max. | 16A |
| Anahtarlama gücü | maks. 5 kVA |
| Mekanik ömür | 106 |
| Datenbreite Eingangsdaten (intern) max. | 2Bit |
| Datenbreite Ausgangsdaten (intern) max. | 2Bit |
| System supply voltage | DC 5 V; via data contacts |
| Current consumption, system supply (5 V) | 5mA |
| Field supply voltage | DC 24 V (-25 … +30 %); über Leistungskontakte (Einspeisung über Messerkontakt; Weiterleitung über Federkontakt) |
| Current consumption, field supply (module with no external load) | 80mA |
| İzolasyon | 1500 V system/field |
| Indicators | LED yellow: Manual mode |
| Number of incoming power jumper contacts | 2 |
| Number of outgoing power jumper contacts | 2 |
| Current carrying capacity of the power jumper contacts | 10A |
| Connection technology: In-/Outputs | 4 x CAGE CLAMP® |
| Connection type (1) | Inputs/Outputs |
| Tek damarlı boylar | 0,08 … 2,5 mm² / 28 … 14 AWG |
| İnce bükümlü kablolar | 0,08 … 2,5 mm² / 28 … 14 AWG |
| Sıyırma uzunluğu | 8 … 9 mm / 0.31 … 0.35 inch |
| Width | 24 mm / 0.945 inch |
| Height | 67,8 mm / 2.669 inch |
| DIN rayın üst kenarından yükseklik | 60,6 mm / 2.386 inch |
| Depth | 100 mm / 3.937 inch |
| Montaj tipi | DIN 35 ray |
| Renk | açık gri |
| Kontak materyali | AgSnO2 |
| Gövde malzemesi | Polycarbonate, polyamide 6.6 |
| Ağırlık | 101,9 |
| Uygunluk işareti | CE |
| Surrounding air (operating) temperature | 0 … 55 °C |
| Surrounding air (storage) temperature | -40 … 85 °C |
| Koruma sınıfı | IP20 |
| Kirlilik derecesi (5) | 2 per IEC 61131-2 |
| Çalışma yüksekliği | 0 … 2000 m |
| Montaj pozisyonu | horizontal (standing/lying) or vertical |
| Nısbi nem (yoğuşmasız) | 95% |
| Titreşime dayanıklı | 4g per IEC 60068-2-6 |
| Darbe direnci | 15g per IEC 60068-2-27 |
| EMV-Störfestigkeit | acc. to EN 61000-6-2, marine applications |
| EMU: |
acc. to EN 61000-6-3, marine applications |
| Kirletici maddelere maruziyet | Per IEC 60068-2-42 and IEC 60068-2-43 |
| Permissible H2S contaminant concentration at a relative humidity |
10ppm |
| Permissible SO2 contaminant concentration at a relative humidity |
25ppm |
| Product Group | 15 (Remote I/O) |
| SAP´den ambalaj tipi | BOX |
| Country of origin | DE |
| GTIN | 4045454495428 |
| Customs Tariff No. | 85371098990 |
As Mnelko, we are a reliable partner in industrial automation solutions, offering high-quality and innovative products with a wide product range to meet all the needs of your business. Our product portfolio consists of solutions designed based on the principles of high performance, durability, and efficiency to support modern industrial processes.
All of our products ensure maximum reliability even in challenging working conditions and help your business operations run smoothly. The products we offer in industrial automation, energy management, cabling solutions, and many other areas adapt flexibly to the needs of different sectors.
Additionally, our products are manufactured using only high-quality materials and comply with international standards. Through the solutions we provide, we enable our customers to increase operational efficiency and optimize costs. Our company closely follows technological advancements and continuously offers innovative products to help our customers gain a competitive advantage.
On each of our product pages, you can find comprehensive information about technical details, areas of use, and product features. You can explore all the products you need to strengthen your industrial processes on our website and enjoy a seamless purchasing experience.
All rights reserved. Mnelko Endüstriyel San. ve Tic.Ltd.Şti. 2024
