2-channel digital output; 24VDC; 2.0A; Fault diagnosis; Extreme; dark greyThis digital output module sends control signals from the automation device to the connected actuators. All outputs are short circuit protected. This output module detects the following faults: overload, short circuit and wire break. The status is sent to the fieldbus coupler and indicated by LEDs. The module is a 3-conductor device. Field and system levels are electrically isolated. The module is very suitable for operation in harsh environmental conditions: - remarkably wide temperature range - high dielectric strength and EMC resistance - high vibration resistance
2-channel digital output; 24VDC; 2.0A; Fault diagnosis; Extreme; dark grey
This digital output module sends control signals from the automation device to the connected actuators.
All outputs are short circuit protected.
This output module detects the following faults: overload, short circuit and wire break.
The status is sent to the fieldbus coupler and indicated by LEDs.
The module is a 3-conductor device.
Field and system levels are electrically isolated.
The module is very suitable for operation in harsh environmental conditions:
- remarkably wide temperature range
- high dielectric strength and EMC resistance
- high vibration resistance
Number of digital outputs | 2 |
Total number of channels (module) | 2 |
Sinyal tipi | Voltage |
Type of signal voltage | DC 24 V |
Actuator connection | 2 x (2-conductor, 3 Leiter) |
Output characteristic | high-side switching |
Output current per channel | 2A |
Çıkış akımı | short-circuit-protected |
Switching frequency max. | 1 kHz |
Yük tipi | rezistif, endüktif, lambalar |
Arıza teşhisi | Açık devre, aşırı yük ve kısa devre |
Switching frequency max. | 1000Hz |
Datenbreite Eingangsdaten (intern) max. | 2Bit |
Datenbreite Ausgangsdaten (intern) max. | 2Bit |
System supply voltage | DC 5 V; via data contacts |
Current consumption, system supply (5 V) | 14mA |
Field supply voltage | DC 24 V (-25 … +30 %); über Leistungskontakte (Einspeisung über Messerkontakt; Weiterleitung über Federkontakt); angegebene Werte für Umgebungstemperaturen: +15 … +35 °C; für −40 … +55 °C: 24 V (−25 … +20 %); für +55 … +70 °C: 24 V (−25 … +10 %); Untergrenze in allen Temperaturbereichen: −27,5 % (inklusive 15 % Restwelligkeit) |
Current consumption, field supply (module with no external load) | 7mA |
Dielektrik dayanımı | AC 510 V/DC 775 V; gemäß EN 60870-2-1 |
Rated surge voltage | 1 kV |
Indicators | LED (A, E) green: Status DO 1, DO 2; LED (C, G) red: Error DO 1, DO 2 |
Number of incoming power jumper contacts | 2 |
Number of outgoing power jumper contacts | 2 |
Current carrying capacity of the power jumper contacts | 10A |
Connection technology: In-/Outputs | 6 x CAGE CLAMP® |
Connection type (1) | Inputs/Outputs |
Tek damarlı boylar | 0,25 … 2,5 mm² / 24 … 14 AWG |
İnce bükümlü kablolar | 0,25 … 2,5 mm² / 24 … 14 AWG |
Sıyırma uzunluğu | 8 … 9 mm / 0.31 … 0.35 inch |
Width | 12 mm / 0.472 inch |
Height | 67,8 mm / 2.669 inch |
DIN rayın üst kenarından yükseklik | 60,6 mm / 2.386 inch |
Depth | 100 mm / 3.937 inch |
Montaj tipi | DIN 35 ray |
Renk | koyu gri |
Gövde malzemesi | Polycarbonate, polyamide 6.6 |
Ağırlık | 46,9 |
Uygunluk işareti | CE |
Surrounding air (operating) temperature | -40 … 70 °C |
Surrounding air (storage) temperature | -40 … 85 °C |
Koruma sınıfı | IP20 |
Kirlilik derecesi (5) | 2 per IEC 61131-2 |
Çalışma yüksekliği | without temperature derating: 0 … 2000 m; with temperature derating: 2000 … 5000 m (0.5 K/100 m); max.: 5000 m |
Montaj pozisyonu | horizontal (standing/lying) or vertical |
Nısbi nem (yoğuşmasız) | 95% |
Relative humidity | Short-term condensation per Class 3K7/IEC EN 60721-3-3 and E DIN 40046-721-3 (except wind-driven precipitation, water and ice formation) |
Titreşime dayanıklı | acc. to IEC 60068-2-6 (acceleration: 5g), EN 60870-2-2, IEC 60721-3-1, -3, EN 50155, EN 61373 |
Darbe direnci | acc. to IEC 60068-2-27 (15g/11 ms/half-sine/1000 shocks; 25g/6 ms/1000 shocks), EN 50155, EN 61373 |
EMV-Störfestigkeit | acc. to EN 61000-6-1, -2, EN 61131-2, marine applications, EN 50121-3-2, -4, -5, EN 60255-26, EN 60870-2-1, EN 61850-3, IEC 61000-6-5, IEEE 1613, VDEW: 1994 |
EMU: |
acc. to EN 61000-6-3, -4, EN 61131-2, EN 60255-26, marine applications, EN 60870-2-1, EN 61850-3, EN 50121-3-2, EN 50121-4, -5 |
Kirletici maddelere maruziyet | Per IEC 60068-2-42 and IEC 60068-2-43 |
Permissible H2S contaminant concentration at a relative humidity |
10ppm |
Permissible SO2 contaminant concentration at a relative humidity |
25ppm |
Product Group | 15 (Remote I/O) |
SAP´den ambalaj tipi | BOX |
Country of origin | DE |
GTIN | 4050821460220 |
Customs Tariff No. | 85371098990 |
As Mnelko, we are a reliable partner in industrial automation solutions, offering high-quality and innovative products with a wide product range to meet all the needs of your business. Our product portfolio consists of solutions designed based on the principles of high performance, durability, and efficiency to support modern industrial processes.
All of our products ensure maximum reliability even in challenging working conditions and help your business operations run smoothly. The products we offer in industrial automation, energy management, cabling solutions, and many other areas adapt flexibly to the needs of different sectors.
Additionally, our products are manufactured using only high-quality materials and comply with international standards. Through the solutions we provide, we enable our customers to increase operational efficiency and optimize costs. Our company closely follows technological advancements and continuously offers innovative products to help our customers gain a competitive advantage.
On each of our product pages, you can find comprehensive information about technical details, areas of use, and product features. You can explore all the products you need to strengthen your industrial processes on our website and enjoy a seamless purchasing experience.