2-channel analog input; Thermocouple; Intrinsically safe; blueThe analog input module directly connects two thermocouples operating in hazardous environments Zone 0 and 1. WAGO-I/O-SYSTEM 750 must be installed in Zone 2 or a non-hazardous area. Internal electrical isolation allows operation of grounded sensors. The module automatically linearizes the entire temperature range. Outside the operating temperature range of 0°C - 55°C, the clamping unit relieves the deviation voltage and cold junction compensation. The 24V supply is taken from the power bridge contacts of the module. Field and system levels are electrically isolated. Module parameter setting is done using WAGO-I/O-CHECK 3 software. LED indicators: Green LED (ready On/Off) Red LED (broken wire, out of measuring range) Note:Note: The analog input module must only be operated via the Ex i 24VDC power supply! General information on explosion protection (e.g. mounting regulations) is available in the WAGO-I/O-SYSTEM 750 manuals!
2-channel analog input; Thermocouple; Intrinsically safe; blue
The analog input module directly connects two thermocouples operating in hazardous environments Zone 0 and 1.
WAGO-I/O-SYSTEM 750 must be installed in Zone 2 or a non-hazardous area. Internal electrical isolation allows operation of grounded sensors. The module automatically linearizes the entire temperature range. Outside the operating temperature range of 0°C - 55°C, the clamping unit relieves the deviation voltage and cold junction compensation.
The 24V supply is taken from the power bridge contacts of the module. Field and system levels are electrically isolated.
Module parameter setting is done using WAGO-I/O-CHECK 3 software.
LED indicators:Note: The analog input module must only be operated via the Ex i 24VDC power supply!
General information on explosion protection (e.g. mounting regulations) is available in the WAGO-I/O-SYSTEM 750 manuals!
| Number of analog inputs | 2 |
| Total number of channels (module) | 2 |
| Sinyal tipi | Thermocouple Low voltages |
| Configurable type of signal | yes |
| Sensor connection | 2 x (2-conductor) |
| Güç tüketimi Pmax. | 0,3 W |
| Bit genişliği | 2 x 16 bit veri 2 x 8 bit kontrol/durum (isteğe bağlı) |
| Internal resistance | 1000kΩ |
| Çözünürlük (tüm aralıkta) | 0,1°C veya 0,01 mV, gerilim ölçümü için |
| Çevirme süresi (tip.) | 320ms |
| Çevirme süresi | ≤ 320 ms (her iki kanal) |
| Ölçüm hatası (25°C) | < ± 6 K (gerilim girişi < ± 2 K, soğuk bağlantı < ± 4 K) |
| Sıcaklık katsayısı | < tam skala değerinin ± 0,2´si K / K (tip K) |
| Kendinden güvenli Ex i | yes |
| Sensör tipleri | Thermoelement K; konfigurierbar: J, B, E, L, N, R, S, T, U; Spannungsgeber: ±30 mV, ±60 mV, ±120 mV |
| Sıcaklık aralığı | Typabhängig von -100 … +1.800 °C |
| Ölçüm aralığı | Termokupl: Tip B: +600°C ... +1800°C Tip E: –100°C ... +1000°C Tip J: –100°C… +1200°C Tip K: –100°C ... +1370°C* *(fabrika ayarı) Tip L: -100°C ... +900°C Tip N: –100°C … +1300°C Tip R: 0°C … +1700°C Tip S: –50°C ... +1700°C Tip T: –100°C ... +400°C Tip U: -25°C ... +600°C gerilim sensörü: MB1: ± 30 mV MB2: ± 60 mV MB3: ± 120 mV |
| Soğuk bağlantı(cold junction) kompanzasyonu | dahili, her bir modül çiftinde |
| System supply voltage | DC 5 V; via data contacts |
| Current consumption, system supply (5 V) | 13,5mA |
| Field supply voltage | DC 24 V; (Versorgung über Einspeisung Ex i UO = max. 27,3 V); über Leistungskontakte (Einspeisung über Messerkontakt; Weiterleitung über Federkontakt) |
| Current consumption, field supply (module with no external load) | 8,5mA |
| Güç kaybı PV | 0,3 W |
| İzolasyon | 300 VAC system/field |
| Number of incoming power jumper contacts | 2 |
| Number of outgoing power jumper contacts | 2 |
| ATEX Guideline | EN/IEC 60079-0, -7, -11, -26, -31 |
| Elektrik şebekesi, güvenliğe ilişkin bilgi | Uo = 14.4 V; Io = 29.1 mA; Po = 52.4 mW; Characteristic: Linear |
| Reaktans Ex ia IIC | Lo = 52 mH; Co = 650 nF |
| Reaktans Ex ia IIB | Lo = 100 mH; Co = 4.0 µF |
| Reaktans Ex ia IIA | Lo = 300 mH; Co = 15.8 μF |
| Reaktans Ex ia I | Lo = 400 mH; Co = 17.9 µF |
| Reaktans | (The above-listed ratings do not account for the coincidental occurrence of capacitances and inductances. For ratings taking the coincidental occurrence of capacitances and inductances into account, see manual) |
| Etiketleme | ATEX, IECEx, INMETRO, Underwriters Laboratories Inc. |
| Connection technology: In-/Outputs | 16 x CAGE CLAMP® |
| Connection type (1) | Inputs/Outputs |
| Tek damarlı boylar | 0,08 … 2,5 mm² / 28 … 14 AWG |
| İnce bükümlü kablolar | 0,08 … 2,5 mm² / 28 … 14 AWG |
| Sıyırma uzunluğu | 8 … 9 mm / 0.31 … 0.35 inch |
| Width | 24 mm / 0.945 inch |
| Height | 67,8 mm / 2.669 inch |
| DIN rayın üst kenarından yükseklik | 60,6 mm / 2.386 inch |
| Depth | 100 mm / 3.937 inch |
| Montaj tipi | DIN 35 ray |
| Renk | mavi |
| Gövde malzemesi | Polycarbonate, polyamide 6.6 |
| Ağırlık | 90,5 |
| Uygunluk işareti | CE |
| Surrounding air (operating) temperature | 0 … 55 °C |
| Surrounding air (storage) temperature | -40 … 85 °C |
| Koruma sınıfı | IP20 |
| Kirlilik derecesi (5) | 2 per IEC 61131-2 |
| Çalışma yüksekliği | 0 … 2000 m |
| Montaj pozisyonu | horizontal (standing/lying) or vertical |
| Nısbi nem (yoğuşmasız) | 95% |
| Titreşime dayanıklı | 4g per IEC 60068-2-6 |
| Darbe direnci | 15g per IEC 60068-2-27 |
| EMV-Störfestigkeit | acc. to EN 61000-6-2, marine applications |
| EMU: |
acc. to EN 61000-6-3, marine applications |
| Kirletici maddelere maruziyet | Per IEC 60068-2-42 and IEC 60068-2-43 |
| Permissible H2S contaminant concentration at a relative humidity |
10ppm |
| Permissible SO2 contaminant concentration at a relative humidity |
25ppm |
| Product Group | 15 (Remote I/O) |
| SAP´den ambalaj tipi | BOX |
| Country of origin | DE |
| GTIN | 4045454961893 |
| Customs Tariff No. | 85389099990 |
As Mnelko, we are a reliable partner in industrial automation solutions, offering high-quality and innovative products with a wide product range to meet all the needs of your business. Our product portfolio consists of solutions designed based on the principles of high performance, durability, and efficiency to support modern industrial processes.
All of our products ensure maximum reliability even in challenging working conditions and help your business operations run smoothly. The products we offer in industrial automation, energy management, cabling solutions, and many other areas adapt flexibly to the needs of different sectors.
Additionally, our products are manufactured using only high-quality materials and comply with international standards. Through the solutions we provide, we enable our customers to increase operational efficiency and optimize costs. Our company closely follows technological advancements and continuously offers innovative products to help our customers gain a competitive advantage.
On each of our product pages, you can find comprehensive information about technical details, areas of use, and product features. You can explore all the products you need to strengthen your industrial processes on our website and enjoy a seamless purchasing experience.
All rights reserved. Mnelko Endüstriyel San. ve Tic.Ltd.Şti. 2024
