4 kanallı analog giriş; 0/4 … 20 mA; Kendinden güvenli; Aşırı; mavi This analog input module powers the intrinsically safe signal conditioners located in the hazardous areas of Zone 0+1 and processes their analog signals.The WAGO-I/O-SYSTEM 750 XTR must be installed either in Zone 2 or in a non-hazardous area.The 24 V supply is derived from the module’s power jumper contacts.The transmitter supply is non-inherently electronically short-circuit-protected.The shield is directly connected to the DIN-rail.Indicators:Green LED (availability ON/OFF)Red LED (measurement range overflow/underflow, wire breakage, short circuit)Field and system levels are electrically isolated.The device is ideal for operation in harsh environments thanks to:Extended temperature rangeGreater immunity to impulse voltages and electromagnetic interferenceHigher vibration and shock resistanceNote:The analog input module must only be operated via 24 VDC Ex i XTR power supply (750-606/040-000)!General information (e.g., installation regulations) on explosion protection is available in the WAGO-I/O-SYSTEM 750 XTR manuals!
4 kanallı analog giriş; 0/4 … 20 mA; Kendinden güvenli; Aşırı; mavi
This analog input module powers the intrinsically safe signal conditioners located in the hazardous areas of Zone 0+1 and processes their analog signals.
The WAGO-I/O-SYSTEM 750 XTR must be installed either in Zone 2 or in a non-hazardous area.
The 24 V supply is derived from the module’s power jumper contacts.
The transmitter supply is non-inherently electronically short-circuit-protected.
The shield is directly connected to the DIN-rail.
Indicators:
Field and system levels are electrically isolated.
The device is ideal for operation in harsh environments thanks to:
The analog input module must only be operated via 24 VDC Ex i XTR power supply (750-606/040-000)!
General information (e.g., installation regulations) on explosion protection is available in the WAGO-I/O-SYSTEM 750 XTR manuals!
| Number of analog inputs | 4 |
| Total number of channels (module) | 4 |
| Sinyal tipi | Current |
| Type of signal current | DC 0 … 20 mA; DC 4 … 20 mA |
| Sensor connection | 2 x (3-conductor) |
| Çözünürlük [bit] | 12Bit |
| Input resistance max. | 200Ω |
| Güç tüketimi Pmax. | 2.7 W (at 4 x 21 mA signal current) |
| Bit genişliği | 4 x 16-bit data; 4 x 8-bit control/status (optional) |
| Çevirme süresi (tip.) | 10ms |
| Messfehler, Bezugstemperatur | 25°C |
| Messfehler, Abweichung max. vom Messbereichsendwert | 0,1% |
| Temperaturfehler max. vom Messbereichsendwert | 0,01%/K |
| Kendinden güvenli Ex i | yes |
| System supply voltage | DC 5 V; via data contacts |
| Current consumption, system supply (5 V) | 45mA |
| Field supply voltage | DC 24 V; via power jumper contacts (Ex i XTR power supply: UO = max. 27.3 V) |
| Current consumption, field supply (module with no external load) | 19mA |
| Güç kaybı PV | 1.5 W (at 4 x 21 mA signal current) |
| İzolasyon | 300 VAC system/field |
| Dielektrik dayanımı | 510 VAC/775 VDC; per EN 60870-2-1 |
| Rated surge voltage | 1 kV; Rated surge voltage between intrinsically safe and non-intrinsically safe circuits: 1.5 kV (EN 60079-11) |
| Number of incoming power jumper contacts | 2 |
| Number of outgoing power jumper contacts | 2 |
| Current carrying capacity of the power jumper contacts | 1A |
| ATEX Guideline | EN/IEC 60079-0, -7, -11 |
| Elektrik şebekesi, güvenliğe ilişkin bilgi | Uo = 26,8 V; Io = 92,72 mA; Po = 621,27 mW; Kennlinie: Linear |
| Reaktans Ex ia IIC | Lo = 1,6 mH; Co = 0,082 µF |
| Reaktans Ex ia IIB | Lo = 15 mH; Co = 0,71 µF |
| Reaktans Ex ia IIA | Lo = 25 mH; Co = 2.36 µF |
| Reaktans Ex ia I | Lo = 36 mH; Co = 3,84 µF |
| Reaktans | (The above-listed ratings do not account for the coincidental occurrence of capacitances and inductances. For ratings taking the coincidental occurrence of capacitances and inductances into account, see manual) |
| Connection technology: In-/Outputs | 16 x CAGE CLAMP® |
| Connection type (1) | Inputs/Outputs |
| Tek damarlı boylar | 0,25 … 2,5 mm² / 24 … 14 AWG |
| İnce bükümlü kablolar | 0,25 … 2,5 mm² / 24 … 14 AWG |
| Sıyırma uzunluğu | 8 … 9 mm / 0.31 … 0.35 inch |
| Width | 24 mm / 0.945 inch |
| Height | 67,8 mm / 2.669 inch |
| DIN rayın üst kenarından yükseklik | 60,6 mm / 2.386 inch |
| Depth | 100 mm / 3.937 inch |
| Montaj tipi | DIN 35 ray |
| Renk | mavi |
| Gövde malzemesi | Polycarbonate, polyamide 6.6 |
| Ağırlık | 96,5 |
| Uygunluk işareti | CE |
| Surrounding air (operating) temperature | -40 … 70 °C |
| Surrounding air (storage) temperature | -40 … 85 °C |
| Koruma sınıfı | IP20 |
| Kirlilik derecesi (5) | 2 per IEC 61131-2 |
| Çalışma yüksekliği | without temperature derating: 0 … 2000 m; with temperature derating: 2000 … 5000 m (0.5 K/100 m); max.: 5000 m |
| Montaj pozisyonu | horizontal (standing/lying) or vertical |
| Nısbi nem (yoğuşmasız) | 95% |
| Relative humidity | Short-term condensation per Class 3K7/IEC EN 60721-3-3 and E DIN 40046-721-3 (except wind-driven precipitation, water and ice formation) |
| Titreşime dayanıklı | acc. to IEC 60068-2-6 (acceleration: 5g), EN 60870-2-2, IEC 60721-3-1, -3 |
| Darbe direnci | per IEC 60068-2-27 (15g/11 ms/half-sine/1,000 shocks; 25g/6 ms/1,000 shocks), EN 61373 |
| EMV-Störfestigkeit | acc. to EN 61000-6-1, -2, EN 61131-2, marine applications, EN 60255-26, EN 60870-2-1, EN 61850-3, IEC 61000-6-5, IEEE 1613, VDEW: 1994 |
| EMU: |
acc. to EN 61000-6-3, -4, EN 61131-2, EN 60255-26, marine applications, EN 60870-2-1, EN 61850-3 |
| Kirletici maddelere maruziyet | Per IEC 60068-2-42 and IEC 60068-2-43 |
| Permissible H2S contaminant concentration at a relative humidity |
10ppm |
| Permissible SO2 contaminant concentration at a relative humidity |
25ppm |
| SAP´den ambalaj tipi | BOX |
| Country of origin | DE |
| GTIN | 4055143649520 |
| Customs Tariff No. | 85389099990 |
As Mnelko, we are a reliable partner in industrial automation solutions, offering high-quality and innovative products with a wide product range to meet all the needs of your business. Our product portfolio consists of solutions designed based on the principles of high performance, durability, and efficiency to support modern industrial processes.
All of our products ensure maximum reliability even in challenging working conditions and help your business operations run smoothly. The products we offer in industrial automation, energy management, cabling solutions, and many other areas adapt flexibly to the needs of different sectors.
Additionally, our products are manufactured using only high-quality materials and comply with international standards. Through the solutions we provide, we enable our customers to increase operational efficiency and optimize costs. Our company closely follows technological advancements and continuously offers innovative products to help our customers gain a competitive advantage.
On each of our product pages, you can find comprehensive information about technical details, areas of use, and product features. You can explore all the products you need to strengthen your industrial processes on our website and enjoy a seamless purchasing experience.
All rights reserved. Mnelko Endüstriyel San. ve Tic.Ltd.Şti. 2024
