2-channel analog input; 4 … 20 mA HART; Wide. heat; -The analog input module feeds the transducers, receives the transmitted analog signals and sends the signals to the fieldbus in an electrically isolated manner. 24V field voltage supply is taken from the power bridge contacts of the module. The shield (screen) is connected directly to the DIN rail. At approximately 25 mA, the overload protection places the measuring input in a high resistance state. It automatically returns to its previous state under normal operating conditions. This input module can supply voltage to 2-wire transducers. Up to 4 HART dynamic variables (PV, SV, TV, QV) per channel can be mapped in the cyclic process image. The HART protocol for HART communication with connected smart HART field devices can be mapped (set) in the cyclic process image of the coupler or controller. FDT/DTM device drivers are available for certain (programmable) couplers and provide HART tool routing to the connected HART device.
2-channel analog input; 4 … 20 mA HART; Wide. heat; -
The analog input module feeds the transducers, receives the transmitted analog signals and sends the signals to the fieldbus in an electrically isolated manner.
24V field voltage supply is taken from the power bridge contacts of the module. The shield (screen) is connected directly to the DIN rail. At approximately 25 mA, the overload protection places the measuring input in a high resistance state. It automatically returns to its previous state under normal operating conditions. This input module can supply voltage to 2-wire transducers.
Up to 4 HART dynamic variables (PV, SV, TV, QV) per channel can be mapped in the cyclic process image. The HART protocol for HART communication with connected smart HART field devices can be mapped (set) in the cyclic process image of the coupler or controller.
FDT/DTM device drivers are available for certain (programmable) couplers and provide HART tool routing to the connected HART device.
| Number of analog inputs | 2 |
| Total number of channels (module) | 2 |
| Sinyal tipi | Current |
| Type of signal current | DC 4 … 20 mA |
| Sensor connection | 2 x (2-conductor) |
| Giriş filtresi | Parametreleştirilebilir |
| Giriş filtresi: parametrelerle ayarlanabilir (kanal-kanal) | yes |
| Giriş gerilimi (maks.) | 24 V |
| Giriş gerilimi düşümü | (Imeas < 28 mA): lineer değil, aşırı yüke karşı korunduğu gibi; V = 0,9 V + 270 Ω x Imeas |
| Signal characteristic | Single-ended |
| Arıza teşhisi | Kablo kopması, ölçüm aralığı dışında |
| Çözünürlük [bit] | 12Bit |
| Bit genişliği | 2 x 2 byte veri 2 x 2 byte veri + 2n x 4 byte veri (n = dinamik değişken adedi) 2 x 2 byte veri + 6 byte posta kutusu |
| Aşırı gerilim koruması | 30 V, ters polarite korumalı |
| Çevirme süresi (tip.) | 10ms |
| Messfehler, Bezugstemperatur | 25°C |
| Messfehler, Abweichung max. vom Messbereichsendwert | 0,1% |
| Temperaturfehler max. vom Messbereichsendwert | 0,01%/K |
| Hat kopma algılaması | I meas < 3,10 mA |
| Kısa devre tespiti | I meas > 22 mA |
| System supply voltage | DC 5 V; via data contacts |
| Current consumption, system supply (5 V) | 65mA |
| Field supply voltage | DC 24 V (-25 … +30 %); über Leistungskontakte (Einspeisung über Messerkontakt; Weiterleitung über Federkontakt) |
| Kanal başına HART aygıtları | 1 aygıt (single-drop, no multi-drop) |
| Kanal başına HART modemleri | 1 modem (multiplex değil) |
| İzolasyon | 500 V sistem/besleme |
| Number of incoming power jumper contacts | 2 |
| Number of outgoing power jumper contacts | 2 |
| Connection technology: In-/Outputs | 8 x CAGE CLAMP® |
| Connection type (1) | Inputs/Outputs |
| Tek damarlı boylar | 0,08 … 2,5 mm² / 28 … 14 AWG |
| İnce bükümlü kablolar | 0,08 … 2,5 mm² / 28 … 14 AWG |
| Sıyırma uzunluğu | 8 … 9 mm / 0.31 … 0.35 inch |
| Width | 12 mm / 0.472 inch |
| Height | 69,8 mm / 2.748 inch |
| DIN rayın üst kenarından yükseklik | 62,6 mm / 2.465 inch |
| Depth | 100 mm / 3.937 inch |
| Montaj tipi | DIN 35 ray |
| Gövde malzemesi | Polycarbonate, polyamide 6.6 |
| Ağırlık | 52,1 |
| Uygunluk işareti | CE |
| Surrounding air (operating) temperature | -20 … 60 °C |
| Surrounding air (storage) temperature | -40 … 85 °C |
| Koruma sınıfı | IP20 |
| Kirlilik derecesi (5) | 2 per IEC 61131-2 |
| Çalışma yüksekliği | 0 … 2000 m |
| Montaj pozisyonu | horizontal (standing/lying) or vertical |
| Nısbi nem (yoğuşmasız) | 95% |
| Relative humidity | Short-term condensation per Class 3K6/IEC EN 60721-3-3 and E DIN 40046-721-3, taking a temperature range of −20 … +60 °C into consideration (except wind-driven precipitation, water and ice formation) |
| Titreşime dayanıklı | acc. to IEC 60068-2-6 |
| Darbe direnci | 15g per IEC 60068-2-27 |
| EMV-Störfestigkeit | acc. to EN 61000-6-2 |
| EMU: |
acc. to EN 61000-6-3 |
| Kirletici maddelere maruziyet | Per IEC 60068-2-42 and IEC 60068-2-43 |
| Permissible H2S contaminant concentration at a relative humidity |
10ppm |
| Permissible SO2 contaminant concentration at a relative humidity |
25ppm |
| Product Group | 15 (Remote I/O) |
| SAP´den ambalaj tipi | BOX |
| Country of origin | DE |
| GTIN | 4045454626914 |
| Customs Tariff No. | 85389099990 |
As Mnelko, we are a reliable partner in industrial automation solutions, offering high-quality and innovative products with a wide product range to meet all the needs of your business. Our product portfolio consists of solutions designed based on the principles of high performance, durability, and efficiency to support modern industrial processes.
All of our products ensure maximum reliability even in challenging working conditions and help your business operations run smoothly. The products we offer in industrial automation, energy management, cabling solutions, and many other areas adapt flexibly to the needs of different sectors.
Additionally, our products are manufactured using only high-quality materials and comply with international standards. Through the solutions we provide, we enable our customers to increase operational efficiency and optimize costs. Our company closely follows technological advancements and continuously offers innovative products to help our customers gain a competitive advantage.
On each of our product pages, you can find comprehensive information about technical details, areas of use, and product features. You can explore all the products you need to strengthen your industrial processes on our website and enjoy a seamless purchasing experience.
All rights reserved. Mnelko Endüstriyel San. ve Tic.Ltd.Şti. 2024
