alt
alt

750-482
2-channel analog input

2-channel analog input; 4 … 20 mA HART; Light greyThe analog input module feeds the transducers, receives the transmitted analog signals and sends the signals to the fieldbus in an electrically isolated manner. 24V field voltage supply is taken from the power bridge contacts of the module. The shield (screen) is attached directly to the DIN rail. At approximately 25 mA, overload protection places the measuring input in a high resistance state. It automatically returns to its previous state under normal operating conditions. This input module can supply voltage to 2-wire transducers. Up to 4 HART dynamic variables (PV, SV, TV, QV) per channel can be mapped in the cyclic process image. The HART protocol for HART communication with connected smart HART field devices can be mapped (set) in the cyclic process image of the coupler or controller. FDT/DTM device drivers are available for certain (programmable) couplers and provide HART tool routing to the connected HART device.

2-channel analog input; 4 … 20 mA HART; Light grey


The analog input module feeds the transducers, receives the transmitted analog signals and sends the signals to the fieldbus in an electrically isolated manner.

24V field voltage supply is taken from the power bridge contacts of the module. The shield (screen) is attached directly to the DIN rail. At approximately 25 mA, overload protection places the measuring input in a high resistance state. It automatically returns to its previous state under normal operating conditions. This input module can supply voltage to 2-wire transducers.

Up to 4 HART dynamic variables (PV, SV, TV, QV) per channel can be mapped in the cyclic process image. The HART protocol for HART communication with connected smart HART field devices can be mapped (set) in the cyclic process image of the coupler or controller.

FDT/DTM device drivers are available for certain (programmable) couplers and provide HART tool routing to the connected HART device.

Number of analog inputs 2
Total number of channels (module) 2
Sinyal tipi Current
Type of signal current DC 4 … 20 mA
Sensor connection 2 x (2-conductor)
Giriş filtresi Parametreleştirilebilir
Giriş filtresi: parametrelerle ayarlanabilir (kanal-kanal) yes
Giriş gerilimi (maks.) 24 V
Giriş gerilimi düşümü (Imeas < 28 mA): lineer değil, aşırı yüke karşı korunduğu gibi; U = 0,9 V + 270 Ω x I meas
Signal characteristic Single-ended
Arıza teşhisi Kablo kopması, ölçüm aralığı dışında
Çözünürlük [bit] 12Bit
Bit genişliği 2 x 2 byte veri 2 x 2 byte veri + 2n x 4 byte veri (n = dinamik değişken adedi) 2 x 2 byte veri + 6 byte posta kutusu
Aşırı gerilim koruması 30 V, ters polarite korumalı
Çevirme süresi (tip.) 10ms
Messfehler, Bezugstemperatur 25°C
Messfehler, Abweichung max. vom Messbereichsendwert 0,1%
Temperaturfehler max. vom Messbereichsendwert 0,01%/K
Hat kopma algılaması I meas < 3,10 mA
Kısa devre tespiti I meas > 22 mA
System supply voltage DC 5 V; via data contacts
Current consumption, system supply (5 V) 65mA
Field supply voltage DC 24 V (-25 … +30 %); über Leistungskontakte (Einspeisung über Messerkontakt; Weiterleitung über Federkontakt)
Kanal başına HART aygıtları 1 aygıt (single-drop, no multi-drop)
Kanal başına HART modemleri 1 modem (multiplex değil)
İzolasyon 500 V sistem/besleme
Number of incoming power jumper contacts 2
Number of outgoing power jumper contacts 2
Connection technology: In-/Outputs 8 x CAGE CLAMP®
Connection type (1) Inputs/Outputs
Tek damarlı boylar 0,08 … 2,5 mm² / 28 … 14 AWG
İnce bükümlü kablolar 0,08 … 2,5 mm² / 28 … 14 AWG
Sıyırma uzunluğu 8 … 9 mm / 0.31 … 0.35 inch
Width 12 mm / 0.472 inch
Height 69,8 mm / 2.748 inch
DIN rayın üst kenarından yükseklik 62,6 mm / 2.465 inch
Depth 100 mm / 3.937 inch
Montaj tipi DIN 35 ray
Renk açık gri
Gövde malzemesi Polycarbonate, polyamide 6.6
Ağırlık 52,1
Uygunluk işareti CE
Surrounding air (operating) temperature 0 … 55 °C
Surrounding air (storage) temperature -40 … 85 °C
Koruma sınıfı IP20
Kirlilik derecesi (5) 2 per IEC 61131-2
Çalışma yüksekliği 0 … 2000 m
Montaj pozisyonu horizontal (standing/lying) or vertical
Nısbi nem (yoğuşmasız) 95%
Titreşime dayanıklı acc. to IEC 60068-2-6
Darbe direnci 15g per IEC 60068-2-27
EMV-Störfestigkeit acc. to EN 61000-6-2
EMU: 1 - enterferans emisyonu acc. to EN 61000-6-3
Kirletici maddelere maruziyet Per IEC 60068-2-42 and IEC 60068-2-43
Permissible H2S contaminant concentration at a relative humidity 75 % 10ppm
Permissible SO2 contaminant concentration at a relative humidity 75 % 25ppm
Product Group 15 (Remote I/O)
SAP´den ambalaj tipi BOX
Country of origin DE
GTIN 4017332319522
Customs Tariff No. 85389099990

As Mnelko, we are a reliable partner in industrial automation solutions, offering high-quality and innovative products with a wide product range to meet all the needs of your business. Our product portfolio consists of solutions designed based on the principles of high performance, durability, and efficiency to support modern industrial processes.
All of our products ensure maximum reliability even in challenging working conditions and help your business operations run smoothly. The products we offer in industrial automation, energy management, cabling solutions, and many other areas adapt flexibly to the needs of different sectors.
Additionally, our products are manufactured using only high-quality materials and comply with international standards. Through the solutions we provide, we enable our customers to increase operational efficiency and optimize costs. Our company closely follows technological advancements and continuously offers innovative products to help our customers gain a competitive advantage.
On each of our product pages, you can find comprehensive information about technical details, areas of use, and product features. You can explore all the products you need to strengthen your industrial processes on our website and enjoy a seamless purchasing experience.